DOI QR코드

DOI QR Code

Kinematic Analysis and Optimal Design of 2RPR-RP Parallel Manipulator

2RPR-RP 병렬 기구의 기구학 해석 및 최적설계

  • 남윤주 (부산대학교 대학원 지능기계공학과) ;
  • 이육형 (부산대학교 기계기술연구소) ;
  • 박명관 (부산대학교 기계공학부 및 기계기술연구소)
  • Published : 2005.11.01

Abstract

This paper presents the two degree-of-freedom(DOF) planar parallel mechanism called 2R$\underline{P}$R-RP manipulator, whose degree-of freedom is dependent on a passive constraining leg connecting the base and the platform. First, the kinematic analysis of the mechanism is performed analytically: the inverse and forward kinematic problems are solved in the closed font the practical workspace is systematically derived, and all of the singular configurations are examined. Then, in order to determine the geometric parameters and the operating limits of the actuators, the optimization of the mechanism is performed considering its dexterity and stiffness. Finally, the kinematic performances of the optimized mechanism are evaluated through comparing to the 5-bar parallel manipulator.

Keywords

References

  1. Tsai, L.-W. and Joshi, S., 2002, 'Kinematic Analysis of 3-DOF Position Mechanisms for Use in Hybrid Kinematic Machines,' Tran. ASME J. Mech. Des., Vol. 124, pp. 245-253 https://doi.org/10.1115/1.1468860
  2. Pham, H. H. and Chen, I-M., 2002, 'Kinematics, Workspace and Static Analysis of 2-DOF Flexure Parallel Mechanism,' 7th Int. Conf. on Control, Automation, Robotics and Vision, Singapore, pp. 968-973 https://doi.org/10.1109/ICARCV.2002.1238555
  3. Liu, X.-J., Tang, X. and Wang, J., 2003, 'A Novel 2-DOF Parallel Mechanism Based Design of A New 5-Axis Hybrid Machine Tool,' Proc. IEEE Int. Conf. on Robotics and Automation, Taipei, Taiwan, pp. 3990-3995 https://doi.org/10.1109/ROBOT.2003.1242210
  4. Callegari, M. and Tarantini, M., 2003, 'Kinematic Analysis of A Novel Translational Plaform,' Tran. ASME J. Mech. Des., Vol. 125, pp. 308-315 https://doi.org/10.1115/1.1563637
  5. Ji, P. and Wu, H., 2003, 'Kinematics Analysis of An Offset 3-DOF Translational Parallel Robotic Manipulator,' Robotics and Autonomous Systems, Vol. 42, pp. 117-123 https://doi.org/10.1016/S0921-8890(02)00324-X
  6. Tsai, M.-S., Shiau, T.-N., Tsai, Y.-J., Chang, T.-H., 2003 'Direct Kinematic Analysis of A 3-PRS Parallel Mechanism,' Mech. Mach. Theory, vol. 38, pp. 71-83 https://doi.org/10.1016/S0094-114X(02)00069-1
  7. Gregorio, R. D. and Parenti-Castelli, 2001, 'Position Analysis in Analytical Form of the 3-PSP Mechanism,' Tran. ASME J. Mech. Des., Vol. 123 https://doi.org/10.1115/1.1324670
  8. Romdhane, L., Affi, Z. and Fayet, M., 2002, 'Design and Singularity Analysis of A 3-Translational-DOF In-Parallel Manipulator,' Tran. ASME J. Mech. Des., Vol. 124, pp. 419-426 https://doi.org/10.1115/1.1480815
  9. Joshi, S. and Tsai, L.-W., 2002, 'A Comparison Study of Two 3-DOF Parallel Manipulators: One with Three and the Other with Four Supporting Legs,' Proc. IEEE Int. Conf. on Robotics and Automation, DC, pp. 3690-3697 https://doi.org/10.1109/ROBOT.2002.1014283
  10. Stock, M. and Miller, K., 2003, 'Optimal Kinematic Design of Spatial Parallel Manipulators: Application to Linear Delta Robot,' Tran. ASME J. Mech. Des., Vol. 125, pp. 292-301 https://doi.org/10.1115/1.1563632
  11. Kim, H. S. and Tsai, L.-W., 2003, 'Kinematic Synthesis of A Spatial 3-RPS Parallel Manipulator,' Tran. ASME J. Mech. Des., Vol. 125, pp. 92-97 https://doi.org/10.1115/1.1539505
  12. Ji, Z., 2003, 'Study of Planar Three-Degree-of-Freedom 2-RRR Parallel Manipulators,' Mech. Mach. Theory, Vol. 38, pp. 409-416 https://doi.org/10.1016/S0094-114X(02)00130-1
  13. Gao, F, Liu, X. and Gruver, W. A., 1998, 'Performance Evaluation of Two-Degree-of-Freedom Planar Parallel Robots,' Mech. Mach. Theory, Vol. 33, No. 6, pp. 661-668 https://doi.org/10.1016/S0094-114X(97)00102-X
  14. Frisoli, A., Prisco, G. M., Salsedo, F. and Bergamasco, M., 1999, 'A Two Degrees-of-Freedom Planar Haptic Interface with High Kinematic Isotropy,' Proc. IEEE Int. Works, on Robot and Human Interaction, Pisa, Italy, pp. 297-302 https://doi.org/10.1109/ROMAN.1999.900356
  15. Gregorio, R. D., 2002, 'Analytic Determination of Workspace and Singularities in A Parallel Pointing System,' J. Robot. Syst, Vol. 19, No. 1, pp. 37-43 https://doi.org/10.1002/rob.8120
  16. Gosselin, C. M. and Angeles, J., 1990, 'Singularity Analysis of Closed Loop Kinematic Chains,' IEEE Trans. Robot. Automat, Vol. 6, pp. 281-290 https://doi.org/10.1109/70.56660
  17. Ma, O. and Angeles, J., 1992, 'Architecture Singularities of Platform Manipulator,' Proc. IEEE Int. Conf. on Robotics and Automation, CA, pp. 1542-1547
  18. Birglen, L., Gosselin, C., Pouliot, N., Monsarrat, B. and Laliberte, T., 2002, 'SHaDe, A New 3-DOF Haptic Device,' IEEE Trans. Robot. Automat., Vol. 18, No. 2, pp. 166-175 https://doi.org/10.1109/TRA.2002.999645
  19. Yoshikawa, T., 1991, 'Translational and Rotational Manipulability of Robotic Manipulators,' Proc. IEEE Int. Conf. on Industrial Electronics, Control and Instrumentation, pp. 1170-1175 https://doi.org/10.1109/IECON.1991.239275
  20. Yoshikawa, T., 1985, 'Manipulability of Robotic Mechanisms,' Int. J. Robotics Research, Vol. 4, No. 2, pp. 3-9 https://doi.org/10.1177/027836498500400201
  21. Huang, T., Li, M., Li, Z., Chetwynd, D. G. and Whiltehouse, D. J., 2004, 'Optimal Kinematic Design of 2-DOF Parallel Manipulators with Well-Shaped Workspace Bounded by a Specified Conditioning Index,' IEEE Trans. Robot. Automat., Vol. 20, No. 3, pp. 538-543 https://doi.org/10.1109/TRA.2004.824690

Cited by

  1. Workspace optimization and kinematic performance evaluation of 2-DOF parallel mechanisms vol.20, pp.10, 2006, https://doi.org/10.1007/BF02916265
  2. Study of Local Performance Index of 2-DOF Parallel Manipulator vol.37, pp.1, 2013, https://doi.org/10.3795/KSME-A.2013.37.1.089