Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Fatigue Strength Assessment of the Cruciform Fillet Welded Joint Using Hot-spot Stress Approach

Hot-spot 응력을 이용한 십자형 필렛 용접재의 피로강도 평가

  • Published : 2005.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, fatigue tests to obtain S-N curves and FE analyses to obtain structural stress concentration factors were conducted for the two types of cruciform fillet welded joints, that is, load-carrying and non load-carrying types. Then we changed the obtained S-N curve of load carrying joint to that based on hot spot stress. As a result, the S-N curve of load carrying joint based on hot-spot stress was almost exactly coincided with that of non load-carrying joint based on nominal stress. So we have conducted that the fatigue strength of a welded joint with different geometry from the non stress distribution along the expected crack path.

Keywords

References

  1. 1993, Code of Practice for Fatigue Design and Assessment of Steel Structures, BS 7608
  2. 1992, European Committee for Standardization, Eurocode 3, Design of Steel Structures, Part 1-1
  3. Stephen John Maddox, 1991, Fatigue Strength of Welded Structures, Abington Publishing, p. 49
  4. Seung-Ho Han, Jeong-Woo Han and Byung-Chun Shin, 1998, 'Fatigue Strength Estimation and Fatigue Design of Welded Members under Hot-Spot Stress Concept,' Transactions of the Korean Society of Mechanical Engineers A, Vol. 22, No. 11, pp. 2072-2083
  5. Macdonald, K. A. and Haagensen, P. J., 1999, 'Fatigue Design of Welded Aluminum Rectangular Hollow Section Joints,' Engineering Failure Analysis, Vol. 6, pp. 113-130 https://doi.org/10.1016/S1350-6307(98)00025-9
  6. Zhi-Gang Xiao and Kentaro Yamada, 2004, 'A Method of Determining Geometric Stress for Fatigue Strength Evaluation of Steel Welded Joints,' International Journal of Fatigue, Vol. 26, pp. 1277-1293 https://doi.org/10.1016/j.ijfatigue.2004.05.001
  7. Doerk, O., Fricke, W. and Weissenborn, C., 2003, 'Comparison of Different Calculation Methods for Structural Stresses at Welded Joints,' International Journal of Fatigue, Vol. 25, pp. 359-369 https://doi.org/10.1016/S0142-1123(02)00167-6
  8. Jae Sil Park, Chang Sung Seok, Jae Mean Koo, Jae Ho Shin and Byeong Choon Goo, 2004, 'Fatigue Characteristics of SM490A Welded Joints for Bogie Frame, Journal of the Korean Society of Precision Engineering, Vol. 21, No. 12, pp. 146-154
  9. John Hicks, 1999, Welded Joint Design, third edition, Abington Publishing, p. 92

Cited by

  1. Fatigue Assessment of High Strength Steel Welded Joints Under Bending Loading vol.38, pp.10, 2014, https://doi.org/10.3795/KSME-A.2014.38.10.1163