DOI QR코드

DOI QR Code

An Experimental Study on the Vibrational Characteristics of the Rotor Blade with Fiber Reinforced Plastics

복합재료 FRP로 제작된 Rotor Blade 진동특성 분석에 관한 실험적 연구

  • 백진성 (인하대학교 대학원 선박공학과) ;
  • 이강수 (인하대학교 대학원 선박공학과) ;
  • 박종빈 (인하대학교 대학원 선박공학과) ;
  • 이정탁 (인하대학교 대학원 선박공학과) ;
  • 손충렬 (인하대학교 기계공학부)
  • Published : 2005.11.01

Abstract

The purpose of this paper is that investigates the dynamic behavior characteristic of W.T.S (wind turbine system) and carries out the evaluation analysis during operating W.T.S. To investigate the dynamic behavior characteristic of W.T.S, the experiments to measure vibration of the blade from the attached accelerometer on the flap and edge section of the blade that is one of the most important elements of dynamic characteristic of W.T.S are performed. Natural frequency and mode shape are calculated with commercial program ( ANSYS) using the measured vibration acceleration that receives the signal with F.F.T Analyzer from the accelerometer For validation of these experiments, the finite element analysis is performed with commercial F.E.M program (ANSYS) on the basis of the natural frequency and mode shape. The results indicate that experimental values have good agreements with the finite element analysis.

Keywords

References

  1. Ronald, F. G., 1994, 'Principle of Composite Material Mechanics', McGraw-Hill, Inc., pp. 1-61
  2. Germanisher, L., 1999, 'Regulation for the Certification of Wind Energy Conversion System'
  3. Hansen., M. O. L., 2000, 'Aerodynamics of Wind Turbines', JAMES & JAMES
  4. 손충렬 등, 2001, '수평축 풍력발전시스템 Blade 동특성분석에 관한 연구', 한국소음진동공학회 추계학술대회 논문집 II, pp. 1394-1399
  5. Cheney., M. C., 1999, 'Analysis and Tests of Pultruded Blades for Wind Turbine Rotors', National Renewable Energy Laboratory
  6. 최병근, 2004, '블레이드 진동측정을 위한 스트레인 게이지 설치위치 최적화', 한국소음진동공학회논문집, 제 14 권, 제 9 호, pp. 819-829
  7. Randall., R. B., 1997, '주파수 분석', Bruel & Kjaer