The Journal of Korean Institute of Electromagnetic Engineering and Science (한국전자파학회논문지)

The Korean Institute of Electromagnetic Engineering and Science (한국전자파학회)
권호 표지

Analysis of Crosstalk Reduction by Metal Filled Via Hole Fence in Bent Transmission Lines

구부러진 전송선에서 비아 홀 펜스에 의한 누화 감소 해석

  • Kim Jong-Ho (Department of Radio Science and Engineering, Chungnam National University) ;
  • Han Jae-Kwon (Department of Radio Science and Engineering, Chungnam National University) ;
  • Park Dong-Chul (Department of Radio Science and Engineering, Chungnam National University)
  • Published : 2005.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The crosstalk between bent transmission lines and the effects of additional trace with the metal filled via holes on alleviating the crosstalk are investigated using the circuit concept approach for transmission line sections and impedance modeling for via hole sections. All sections are represented by ABCD matrices and then cascaded. Finally the calculated results by proposed method are confirmed that they agree with the measured results in less than 3 dB except a band of low frequency.

다중 전송선들로 회로를 구성할 경우 필요에 의해 중간 부분이 구부러진 형태를 갖기도 하는데, 이때의 누화는 금속으로 채워진 비아 홀 펜스를 전송선 사이에 위치시킴으로써 감소시킬 수 있다. 이러한 효과를 해석하기 위하여 비아 홀 펜스를 포함한 다중 전송선을 구간별로 나누고, 전송선 구간을 위한 회로 개념 접근법과 비아흘 구간을 위한 임피던스 모델링을 이용하고, 각 구간을 ABCD 행렬로 나타내어 직렬 연결하는 방법을 제안하였다. 마지막으로 이 방법에 의한 최종 계산 결과가 일부 저주파 대역을 제외하고 대략 3 dB 이내의 범위로 측정 결과와 일치함을 확인하였다.

Keywords

References

  1. C. R. Paul, Analysis of Multiconductor Transmission Lines, New York, Wiley-Intersciences, 1994
  2. Y. Kami, R. Sato, 'Analysis of radiation characteristics of a finite-length transmission line using a circuit-concept approach', IEEE Trans. Electromagn. Compat., vol. 30, pp. 114-121, May 1988 https://doi.org/10.1109/15.2396
  3. Y. Kami, R. Sato, 'Crosstalk of finite-length transmission lines in arbitrary directions on the same ground', Proc. 1992 IEEE Intn. Symp. Electromagn. Compat., pp. 247-250, Aug. 1992
  4. S. W. Park, J. C. Ju, and D. C. Park, 'Analysis of crosstalk between multiconductor transmission lines in arbitrary directions using a circuit-concept approach', 2004 International Symposium on Electromagnetic Compatibility, Sendai, Jun. 2004
  5. F. Xiao, K. Murano, and Y. Kami, 'The use of via holes for controlling the crosstalk of non-parallel microstrip lines on PCBs', IEEE International Symposium on Electromagnetic Compatibility, vol. 2, pp. 19-23, Aug. 2002 https://doi.org/10.1109/ISEMC.2002.1032665
  6. 김종호, 박상욱, 주재철, 박동철, 'PCB 전송선에서 비아 펜스의 효과 분석', 한국전자파학회논문지, 16(4), pp. 402-409, 2005년 4월
  7. Darcy N. Ladd, George I. Costache, 'SPICE simulation used to characterize the crosstalk reduction effect of additional tracks grounded with vias on printed circuit boards', IEEE Trans. Circuits and Systems-Il:Analog and Digital Signal Processing, vol. 39, no. 6, pp. 342-347, Jun. 1992 https://doi.org/10.1109/82.145291
  8. S. Li, Y. Liu, Z. Song, and H. Hu, 'Analysis of crosstalk of coupled transmission lines by inserting additional traces grounded with vias on printed circuit boards', Asia-Pacific Conference on Environmental Electromagnetics, pp. 451-454, Nov. 2003 https://doi.org/10.1109/CEEM.2003.1282368
  9. G. E. Ponchak, D. Chun, J. Yook, and Linda P. B. Katehi, 'Experimental verification of the use of metal filled via hole fences for crosstalk control of microstrip lines in LTCC packages', IEEE Trans. Advanced Packing, vol. 24, no. 1, Feb. 2001