참고문헌
- D. N. Lee and K. H. Oh, 'Calculation of Plastic Strain Ratio from the Texture of Cubic Metal Sheet,' J. of Mater. Sci., Vol.20, pp.3111-3118,1985 https://doi.org/10.1007/BF00545175
- P. Lequeu and J. J. Jonas, 'Modeling of the Plastic Anisotropy of Textured Sheet,' Metall. Trans., Vol.19A, pp.105-120, 1988
- W. B. Hutchinson, 'Recrystallization Textures in Iron Resulting from Nucleation at Grain Boundaries,' Acta Mater., Vol.37, No.4, pp. 1047-1056,1989 https://doi.org/10.1016/0001-6160(89)90101-6
- T. Kamijo, H. Adachihara and H. Fukutomi, 'Formation fo a (001)[100] Deformation Structure in Aluminum Single Crystals of an S-Orientation,' Acta Mater., VoI.41, No.3, pp.975-985,1993 https://doi.org/10.1016/0956-7151(93)90032-N
- J. Hu, K. Ikeda and T. Mural'ami, 'Effect of Single Roller Driving Cold-Rolling on Texture and Formability of Pure Aluminum Sheet,' J. Japan Inst. Metals, Vol.60, No.11, pp.1130-1135,1996
- K. Hasegawa, T. Fujita, K. Araki, S. Mitao, K. Osawa, M. Niikura and K. Ohori, 'Effect of Intermediate Annealing on the R-Value of AI-Mg Alloy Sheet,' Mater. Sci. and Eng., Vol.A257,pp.204-214, 1998
- J. J. Park, 'Predictions of Texture and Plastic Anisotropy Developed by Mechanical Deformation in Aluminum Sheet,' J. of Mater. Proc. Tech., Vol.87, pp.146-153, 1999
- Y. Saito, H. Utsunomiya, H. Suzuki and T. Sakai, 'Improvement in the R-Value of Alumi-num Strip by a Continuous Shear Deformation Process,' Scripta Mater., Vol.42, pp.1139-1144,2000 https://doi.org/10.1016/S1359-6462(00)00349-3
- H. N. Lee, S. T. Chang, H. S. Rand S. K. Hwang, 'Monte-Carlo Simulation of the Effect of Initial Grain Size on Grain Growh and Texture Evolution,' J. Kor. Inst. Met. & Mater., Vol.36, No.11, pp.1831-1837, 1998
- S.-H. Choi, F. Barlat and J. H. Chung, 'Modeling of Textures and Yield Surfaces during Recrystallization in IF Steel Sheets,' Scripta Mater., Vol.45, pp.1155-1162, 2001 https://doi.org/10.1016/S1359-6462(01)01133-2
- K. J. Kim, 'Plastic Strain Ratios and Planar Anisotropy of AA5182/Polypropy lene/ AA5182 Sandwich Sheets,' Int. J. Automotive Technology, Vol.6, No.3, pp.259-268, 2005