Composites Research

  • 제18권5호
  • /
  • Pages.9-14
  • /
  • 2005
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지

클램핑 포스가 존재하는 복합재료 체결부의 파손강도 예측

Failure load prediction of mechanically fastened composite joint with the clamping force

  • 류충오 (경상대학교 기계항공공학부 대학원) ;
  • 최진호 (경상대학교 기계항공공학부, 항공기부품기술연구소) ;
  • 권진회 (경상대학교 기계항공공학부, 항공기부품기술연구소)
  • 발행 : 2005.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

복합재 구조물에서 체결부위는 매우 취약한 부분이므로 복합재료 체결부에 대한 설계는 중요한 연구분야로 대두되고 있다. 본 논문에서는 클램핑 포스가 존재하는 복합재료 기계적 체결부의 파손강도를 파괴면적지수법으로 예측하였다. 클램핑 포스가 존재하는 기계적 체결부의 파손강도를 파괴면적지수법으로 예측한 결과, $22.5\%$ 범위 내에서 체결부의 강도를 예측할 수 있었다.

The design of composite joint is a very important research area because they are often the weakest areas in composite structures. In this paper, the failure load of the mechanically fastened composite joint with the clamping force was predicted by the failure area index method. By the suggested failure area index method, the strength of the mechanically fastened composite joint could be predicted within $22.5\%$ when the clamping force was applied to the composite joint.

키워드

참고문헌

  1. L. J. Hart-Smith, 'Mechanically Fastened Joints For Advanced Composites.Phenomenological Considerations and Simple Analysis,' Fibrous Composite in Structural Design, Plenuum Press, 1980, pp. 543-574
  2. J. M. Whitney and R. J. Nuismer, 1974, 'Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations,' Journal of Composite Materials, Vol.8, pp. 253-265 https://doi.org/10.1177/002199837400800303
  3. J. M. Whitney and R. J. Nuismer, 1975, 'Uniaxial Failure of Composite Laminated Containing Stress Concentrations,' Fracture Mechanics of Composites, ASTM STP 593, pp. 117-142
  4. F. K. Chang and R. A. Scott, 'Strength of Mechanically Fastened Composite Joints,' Journal of Composite Materials, Vol. 16, 1982, pp. 470-494 https://doi.org/10.1177/002199838201600603
  5. F. K. Chang and R. A. Scott, 1984, 'Failure of Composite Laminates Containing Pin Loaded Holes-Method of Solution,' Journal of Composite Materials, Vol. 18, pp. 255-278 https://doi.org/10.1177/002199838401800305
  6. H. T. Sun, F. K. Chang and X. Qing, 'The response of Composite Joints with Bolt-Clamping Loads, Part I :Model Development,' Journal of Composite Materials, Vol. 36, 2002, pp. 47-67 https://doi.org/10.1177/0021998302036001301
  7. H. T. Sun, F. K. Chang and X. Qing, 'The response of Composite Joints with Bolt-Clamping Loads, Part II : Model Verification,' Journal of Composite Materials, Vol. 36, 2002, pp. 69-92 https://doi.org/10.1177/0021998302036001302
  8. 최진호, 전영준, 권진회, '기계적으로 체결된 복합재료 조인트의 강도에 관한 연구' 한국복합재료학회논문집, 제 15권, 제4호, 2002, pp. 9-16
  9. 전영준, 최진호, 권진회, 2003, '파괴면적지수법을 이용한 복합재료 기계적 체결부의 강도평가에 관한 연구' 한국복합재료학회논문집, 제 16권, 제5 호, pp. 1-6
  10. J. H. Choi and Y. J. Chun, 'Failure Load Prediction of Mechanically Fastened Composite Joint,' Journal of Composite Materials, Vol. 37, No. 24, pp. 2163-2177 https://doi.org/10.1177/002199803038108
  11. H. S. Wang, C. L. Hung and F. K. Chang, 'Bearing Failure of Bolted Composite Joints. Part I Experimental Characterization,' Journal of Composite Materials, Vol. 30, No. 12, 1996
  12. C. L. Hung and F. K. Chang, 'Strength Envelope of Bolted Composite Joints under Bypass Loads,' Journal of Composite Materials, Vol. 30, No. 13, 1996
  13. Y. Xiong, C. Poon, P. V. Straznicky and H. Vietinghoff, 1995, 'A prediction method for the compressive strength of impact damaged composite laminates,' Composite Structures, Vol. 30, pp. 357-367 https://doi.org/10.1016/0263-8223(94)00052-2