Journal of Advanced Marine Engineering and Technology

  • 제29권6호
  • /
  • Pages.685-691
  • /
  • 2005
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지

톱니형휜이 부착된 2중 열교환관을 이용한 엔진 배열회수기에 관한 실험적 연구

An Experimental Study on the Heat Exchanger for the Engine Waste Heat Recovery Using Serrated Fins and Bayonet Tube

  • 양태진 (부경대학교 냉동공조공학과 대학원) ;
  • 김종수 (부경대학교 기계공학부) ;
  • 임용빈 (부경대학교 냉동공조공학과 대학원)
  • 발행 : 2005.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, high performance waste heat recovery heat exchanger was developed using the bayonet tube with spiral serrated fins. Especially, heat exchanger of the bayonet tube type was operated well because of double water passes mechanism and characteristics. A cooling water Passes down inner tubes to thimble-form tubes, then flows back up as it boils. The heat exchanger of bayonet tube type was composed of steel tube with 7channels$(I.D_1\;14mm.\;I.D_2\;31.6mm)$ and spiral serrated fins. The performance tests were conducted under the following conditions A cooling water flow rate was 273kg/h and engine l·pm was varied from 750rpm to 3500 rpm. From the experimental result. waste heat recovery was 9.21kW when engine rpm was 3500. and pressure drop was $15\~260mmHg/m^3$ The effectiveness of heat exchanger was about /$0.7\~0.9$. The performance of heat exchanger was evaluated by using the $\varepsilon-NTU$ method. In the study the NTU of the heat exchanger was $1.57\~2.33$.

키워드

참고문헌

  1. G. F. Hewitt, G. L. Shires, T.R. Bott, Process Heat Transfer, U.S.A., pp. 491-498, 1994
  2. Hinchley, P., Waste Heat Boilers: Problems and Solutions, Chem. Eng. Prog, 1977
  3. Talbi, M: Agnew, B. Energy Recovery From Diesel Engine Exhaust Gases Gor Performance Enhancement and Air Conditioning, Applied Thermal Engineering. Vol. 22, No, 6, pp. 693-702, 2002 https://doi.org/10.1016/S1359-4311(01)00120-X
  4. Shields, C. D., Dryout in Horizontal Hairpin Waste Heat Boiler Tubes, AICHE Symp. Ser., 69(131), pp. 55, 1973
  5. S. S. Hsieh, C. T. Liauh, and W. S. Han, Thermal Performances of Heat Exchangers Applicable to Waste Heat Recovery Systems, Applied Energy, Vol. 29, pp. 191-200, 1998 https://doi.org/10.1016/0306-2619(88)90028-1
  6. Cho, S. M., Park, Y. J., Kim, C. S. and Seo, W. B, Development of Waste Heat Recovery Technology in Iron and Steel Making Process, Proceeding of 14th Workshop for the technique of energy saving, pp. 361-365. 1999
  7. Hoo-Kyu Oh, Simulation for High Efficient Heat Pump System Using Seawater Heat Source and Exhaust Energy, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 15, No. 1, pp. 59-66, 2003
  8. YUNUS A. CENGEL, Heat Transfer, McGraw-Hill, pp. 570-609, 1998
  9. Webb. R. L., Principles of Enhanced Heat Transfer, Wiley, New york, pp. 35-40, 1994
  10. T. O'Doherty, A. J. Jolly and C. J. Bates, Analysis of a bayonet tube heat exchanger. Applied Thermal Engineering. Vol.21, Issue 1, pp. 1-18, 2001 https://doi.org/10.1016/S1359-4311(99)00063-0
  11. Harpal Minhas and G. S. H. Lock, Forced convection in an air-filled bayonet tube during the laminar-turbulent transition, Iternational Journal of Heat and Mass Transfer, Vol. 40, Issue 8, pp. 1885-1894, 1997 https://doi.org/10.1016/S0017-9310(96)00225-6
  12. N. Kayansayan, Thermal design method of bayonet-tube evaporators and condensers, International Journal of Refrigeration, Vol. 19, Issue 3, Pages 197-207, 1996 https://doi.org/10.1016/0140-7007(95)00079-8