초록
동하중 측정 데이터에 추가되는 여러 가지 종류의 오차로 인하여, 신뢰할 수 있는 하중을 구하기 위해 측정 오차를 감소시키는 적절한 방법이 필요하다. 과도한 진동으로 인해 발생하는 측정 오류는 쉽게 제거하기 어렵다. 이러한 오류를 최소화하기 위하여 측정 장치 혹은 측정 대상의 수직 운동과 상호 관계가 전혀 없는 광 센서 시스템을 이용한다. 여러 가지 시료들의 흐름률을 광 센서를 이용하여 측정함으로써 로드셀을 이용한 부정확한 측정 부분을 보완한다. 동하중 측정시 발생하는 잡음 감소를 확인하기 위하여 모형 트레일러 시스템을 사용하며, 제안된 방법이 효과적임을 확인한다.
Due to various types of errors added to dynamic weight measurement data, proper methods to reduce measurement errors are required to produce reliable weights. It is very difficult to reduce the measurement error due to excessive oscillation of the system. To cope with parasitic types of errors in real systems, information provided by the photo sensors are utilized and combined in such a way to reduce the measurement errors of load cells. In addition to four channels of load cells from a model trailer, photo sensors are used to obtain the information to compensate the error induced from vertical movement of the vehicle due to the variation of ground level. A model trailer system is run to verify the effectiveness of the proposed method to reduce noise of dynamic weight measurements.