참고문헌
- K. S. Mazdiyasni, R. Ruh, and E. E. Hermes, 'Phase Characterization and Properties of AIN-BN Composites,' Am. Ceram. Soc. Bull., 64 [8] 1149-54 (1985)
- T. Kanai, K. Tanemoto, and H. Kubo, 'Hot-Pressed BN-AIN Ceramic Composites of High Thermal Conductivity,' Jpn. J. Appl. Phys., 20 [8] 683-87 (1990)
- T. Kusunose, T. Sekino, B. S. Kim, Y.-H. Choa, T. Nomoto, Y. Yamanoto, and K. Niihara, Materials Science Forum, 439 131-36 (2003)
- A. Lipp, K. A. Schwetz, and K. Hunold, 'Hexagonal Boron Nitride : Fabrication, Properties and Applications,' J. Eur. Ceram. Soc., 5 3-9 (1989) https://doi.org/10.1016/0955-2219(89)90003-4
- Y.-H. Lee, J.-G. Kim, W.-S. Cho, M.-W. Cho, E.-S. Lee, and J. Lee, 'Effect of h-BN Content on Microstructure and Mechanical Properties of AIN Ceramics(in Korean),' J. Kor. Ceram. Soc., 40 [9] 874-80 (2003) https://doi.org/10.4191/KCERS.2003.40.9.874
-
K. Isomura, T. Fukuda, K. Ogasahara, T. Funahashi, and R. Uchimura, 'Machinable
$Si_{3}N_{4}$ -BN Composite Ceramics with High Thermal Shock Resistance, High Erosion Resistance,' pp. 624-34 in UNITECR '89 Proceedings, Edited by L. J. Trostel, Jr., American Ceramic Society, Westerville, OH, 1989 -
M. W. Cho, D. W. Kim, E. S. Lee, W. S. Cho, J. Lee, D. S. Park, and T. Seo, 'Machinability Evaluation of
$Si_{3}N_{4}$ -hBN Composites for Micro Pattern Making Processes,' Key Eng. Mat., 264-268 869-72 (2004) https://doi.org/10.4028/www.scientific.net/KEM.264-268.869 - J. Lee, Y.-S. Yoon, W.-S. Cho, E.-S. Lee, and, M.-W. Cho, 'R-Curve Behavior and Mechanical Properties of Mica-Glass,' To be presented in the 4th China International Conference on High-Performance Ceramics, Chengdu, Sichuan Province, China, Oct. 23-26, 2
-
Y. S. Yoon, S. W. Na, J. Lee, M.-W. Cho, E.-S. Lee, and W.-S. Cho, 'R-Curve Behavior of
$Si_{3}N_{4}$ -BN Composites,' J. Am. Ceram. Soc., 87 [7] 1374-77 (2004) https://doi.org/10.1111/j.1151-2916.2004.tb07740.x - G. R. Antis, P. Chanticul, B. R. Lawn, and D. B. Marshall, 'Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness : I. Direct Crack Measurement,' J. Am. Ceram. Soc., 64 [9] 533-38 (1981) https://doi.org/10.1111/j.1151-2916.1981.tb10320.x
- P. Chanticul, G. R. Antis, B. R. Lawn, and D. B. Marshall, 'Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness : II. Strength Methods,' J. Am. Ceram. Soc., 64 [9] 539-43 (1981) https://doi.org/10.1111/j.1151-2916.1981.tb10321.x
- R. K. Bordia and G. W. Scherer, 'Overview No. 70-On Constrained Sintering-Part III. Rigid Inclusions,' Acta Metall., 36 [9] 2411-16 (1988) https://doi.org/10.1016/0001-6160(88)90191-5
- D. Green, 'An Introduction to the Mechanical Properties of Ceramics,' pp. 286-91, Cambridge University Press, Cambridge, 1998
- B. Lawn, Fracture of Brittle Solids, 2nd Ed., pp. 72-9, Cambridge University Press, Cambridge, 1993
- B. Lawn, Fracture of Brittle Solids, 2nd Ed., pp. 230-41, Cambridge University Press, London, Cambridge, 1993
- K. Niihara, 'Indentation Microfracture of Ceramics(in Jpn.),' Ceramics Japan, 20 [1] 12-8 (1985)
-
Y. S. Yoon, H. W. Ahn, B. K. Koo, J. Lee, M.-W. Cho, E.-S. Lee, and W.-S. Cho, 'R-Curve Behavior of
$Si_{3}N_{4}$ -BN and AlN-BN Composites,' Presented in the 2nd Korea-Slovenia Joint Workshop on Advanced Materials, Pohang, Korea, Nov. 11. 2004