Evaluation of Effective Thermal Conductivity and Thermal Resistance in Ground Heat Exchanger Boreholes

지중 열교환기 보어홀에서의 유효 열전도도 및 열저항 산정

  • Sohn Byong Hu (Fire & Engineering Services Research Department, KICT) ;
  • Shin Hyun-Joon (Fire & Engineering Services Research Department, KICT) ;
  • Park Seong-Koo (Fire & Engineering Services Research Department, KICT)
  • 손병후 (한국건설기술연구원 화재 및 설비 연구부, (주)지오테크) ;
  • 신현준 (한국건설기술연구원 화재 및 설비 연구부, (주)지오테크) ;
  • 박성구 (한국건설기술연구원 화재 및 설비 연구부, (주)지오테크)
  • Published : 2005.08.01

Abstract

The objective of this study is to determine the effective thermal conductivity and thermal resistance values in test boreholes with three different fill materials. To evaluate these heat transfer properties, in-situ tests on four vertical boreholes were conducted by adding a monitored amount of heat to water over various test lengths. Two parameter estimation models, line-source and numerical one-dimensional models, for evaluation of thermal response test data were compared when applied on the same four data sets. Results show that the average thermal conductivity deviation between measured data and these two models is in the range of $3.03\%$ to $4.45\%$. The effect of increasing grout thermal conductivity from 1.34 to 1.82 $W/m^{\circ}C$ resulted in overall increases in effective formation thermal conductivity by $11.1\%$ to $51.9\%$ and reductions in borehole thermal resistance by $11.6\%$ to $26.1\%$.

Keywords

References

  1. Spilker, E. H., 1998, Ground-coupled heat pump loop design using thermal conductivety testing and the effect of different backfill materials on vertical bore length, ASHRAE Transactions, Vol. 104, pp.775-779
  2. Zhang, Q. and Murphy, W. E., 2000, Measurement of thermal conductivity for three borehole fill materials used for GSHP, ASHRAE Transactions, Vol. 106, pp.434-441
  3. Kavanaugh, S. P. and Allan, M. A., 1999, Testing of thermally enhanced cement ground heat exchanger grouts, ASHRAE Transactions, Vol. 105, pp. 446-450
  4. Remund, C. P., 1999, Borehole thermal resistance: laboratory and field studies, ASHRAE Transactions, Vol. 105, pp. 439-445
  5. Smith, M. D. and Perry, R. L., 1999, Borehole grouting: field studies and thermal performance testing, ASHRAE Transactions, Vol. 105, pp.451-457
  6. Shonder, J. A. and Beck, J. Y., 2000, Field test of a new method for determining soil formation thermal conductivity and borehole resistance, ASHRAE Transactions, VoI.106, pp. 843-850
  7. Mogensen, P., 1983, Fluid to duct wall heat transfer in duct system storages, Proceedings of the International Conference on Subsurface Heat Storage in Theory and Practice. Swedish Council for Building Research, June 6-8
  8. Ingersoll, L. R. and Plass, H.J., 1948, Theory of the ground pipe heat source for the heat pump, Heating, Piping & Air Conditioning, July, pp.119-122
  9. Carlslaw, H. S. and Jaeger, J, C., 1947, Conduction of Heat in Solids, Oxford, Claremore Press
  10. Sohn, B. H., Shin, H.J. and An, H.J., 2005, Evaluation of thermal conductivity for grout/soil formation using thermal response test and parameter estimation models, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 17, No.2, pp. 173-182
  11. Martin, C. A. and Kavanaugh, S. P., 2002, Ground thermal conductivity testing control site analysis, ASHRAE Transactions, Vol. 108, pp. 945-952
  12. Beier, R. A. and Smith, M. D., 2003, Minimum duration of in-situ tests on vertical boreholes, ASHRAE Transactions, Vol. 109, pp. 475-486
  13. Bose, J. E., Smith, M. D. and Spitler, J. D., 2002, Advances in ground source heat pump systems; an international overview, Proceedings of the 7th lEA Heat Pump Conference, Vol. 1, pp.313-324
  14. Abramowitz, M. and Stegun, I. A., 1964, Handbook of mathematical functions, national bureau of standards, Applied Mathematics Series 55, US Department of Commerce
  15. Press, W. H., Teukolsky, S. A., Vetterling, W. T. and Flannery, B. P., 1992, Numerical Recipes in Fortran: The Art of Scientific Computing, 2nd ed., Cambridge University Press
  16. Salomone, L. A. and Marlowe, J. I., 1989, Soil and Rock Classification for the Design of Ground-Coupled Heat Pump Systems: Field Manual, Special Report (EPRI CU-660Ol, Electric Power Research Institute)