References
- Chung, J. T., 1995, 'A study on Selection for the Rotating Speeds of Spindle Motors to Stability Computer Hard Disks,' Journal of the Korean Society for Noise and Vibration Engineering, Vol. 5, No 2, pp. 163-168
- Rim, K. H., 2000, 'Stability Analysis of Rotating Discs Due to Head Interference,' Journal of the Korean Society for Noise and Vibration Engineering, Vol. 10, No 5, pp. 163-168
- Huang, F. Y., and Mote, C. D., 1995, 'On the Stability Mechanisms of a Disk Rotating Close to a Rigid Surface,' ASME J. of Applied Mechanics, Vol. 62, pp. 764-771 https://doi.org/10.1115/1.2897012
- Lee, S. Y., Kim, J. K., andKim, S. K., 1999, 'Vibration Characteristics of a New Optical Disk (2): Natural Frequencies of Initially Stressed Disks,' Proceedings of the Autumn Congress 1999 by Korean Society for Noise and Vibration Engineering, pp. 455-461
- Lee, C. W., and Chun, S. B., 1998, 'Vibration Analysis of a Rotor With Multiple Flexible Disks Using Assumed Modes Method,' ASME J. of Vibration and Acoustics, Vol. 120, pp. 87-94 https://doi.org/10.1115/1.2893831
- Wang, J. H., and Huang, W. C., 2001, 'The Improvement of the Dynamic Behaviour of a Spindle Motor for a CD-ROM Drive,' Int. J. of Acoustics and Vibration, Vol. 6, No. 2, pp. 57-64
- Rahman, B. S., and Lieu, D. K., 1994, 'Optimization of a Magnetic Pole Geometry for Field Harmonic Control in Electric Motors,' J. of Vibration and Acoustics, Vol. 116, pp. 173-178 https://doi.org/10.1115/1.2930409
- Kim, M. E., Rim, K. H., and Lee, C. W., 1992, 'Vibraion Analysis of Wafer Cutting Machine and its Experimental Verification,' Transactions the KSME, Vol. 16, No. 1, pp. 22-30
- Kim, S. K., Han, G. H., and Son, H. G., 1998, 'A Study of characteristics of Disk Vibration and Rotating Airflow in Magneto Optical Disk Drive,' IEEE Transactions on Consumer Electronics, Vol. 44, No. 3, pp. 601-605 https://doi.org/10.1109/30.713169
- Shin, E. S., Lee, K. N., Shin, T. M., and Kim, O. H., 2002,, 'Stability Analysis of Transverse Vibration of a Spinning Disk with Speed Fluctuation,' Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 12, No. 1, pp. 21-28