Development of New Techniques of Electrostatic Separation for Using of Clean Coal

청정석탄(淸淨石炭) 이용(利用)을 위한 정전선별(靜電選別) 기술개발(技術開發)

  • Baek, Sang-Ho (Mineral & Materials Processing Division, Korea Institute of Geoscience and Mineral Resources) ;
  • Jeon, Ho-Seok (Mineral & Materials Processing Division, Korea Institute of Geoscience and Mineral Resources) ;
  • Han, Oh-Hyung (Department of Resource Engineering, Chosun University)
  • 백상호 (한국지질자원연구원 자원활용소재연구부) ;
  • 전호석 (한국지질자원연구원 자원활용소재연구부) ;
  • 한오형 (조선대학교 자원공학과)
  • Published : 2005.10.30

Abstract

In 2006, the coal usage that is used as energy source of power plant will meet 16,000 MW which is 30% of the whole energy usage. A Coal deposits among the fossil fuels is very plentiful in natural resources and has high economical efficiency but application technique is very inconvenient. Also when burned for utilization, it generate various toxic and untoxic air pollution materials; fly ash, bottom ash, sulfurous acid gas etc. In this study, we could establish a preparation of clean coal by triboelectrostatic separation. In this study, we made a bench-scale's triboelectrostatic separation equipment using electrostatic technology, and got an optimum conditions of various factors for increasing recovery rate and purification in separation. A test result, we got a clean coal that recovery rate is 68.10%, rejection rate of ash and sulfur content is 31.23% and 28.33%.

국내 경제성장과 더불어 발전소 에너지원으로 이용되고 있는 석탄은 매년 증가하여 2006년에는 전체 에너지 구성의 30%인 16,000MW에 이를 것으로 예측되고 있다. 이러한 석탄은 다른 화석연료에 비해 매장량이 풍부하고 경제성은 높지만, 사용이 불편하고 석탄회, 아황산가스 등 많은 공해물질을 배출하고 있다. 따라서 본 연구에서는 마찰하전형정전선별법을 이용하여 석탄과 회분구성 광물의 선별기술을 확립, 청정석탄을 생산하고자 한다. 본 연구에서는 bench-scale의 마찰하전형정전선별 장치를 제작하였으며, 선별에 영향을 미치는 인자들을 선정하고 분리실험을 수행하여 최적조건을 확립하였다. 연구결과 최적조건에서 석탄 회수율과 회분 및 유황분 제거율이 각각 68.10%. 31.23% 그리고 28.33%인 정제석탄을 얻을 수 있었다.

Keywords

References

  1. 전호석, 한오형, 신선명, 윤여환, 2002, 마찰하전형정전 선별법을 이용한 Mill Reject 산물 재활용 기술 개발, 한국리싸이클링학회지, 11(2), pp. 20-27
  2. 전호석 등, 2001, Clean Coal 생산을 위한 마찰하전형정전 선별 기술개발, 한국자원공학회 추계학술발표회 논문집, pp. 15-19
  3. Dobby, G. S. and Finch, J., 1986, Column Flotation Scale-up and Modelling, CIM Bullutin., May, 78, pp.89-96
  4. Luttrell, G. H., Monkosa, M. J. and Yoon, R. H., Commercial Development of the MICROCELTM Flotation Column, Virginia Center for Coal and Minerals Processing, 1992, pp. 1-6
  5. Gaudin, A. M., 1971, The Principal of Electrical Processing with Particular Application to Electrostatic Separation, Minerals Sci. Engng, 13, pp. 46-57
  6. Inculet, I. I., Bergougnou, M. A., and Brown, J. D., 1982, Electrostatic Beneficiation of Coal, Physical Cleaning of Coal, YA Liu ed., Marcel Dekker INC, New York, pp. 87131
  7. Yoon, R. H., 1998, POC-Scale Testing of a Dry Triboelectrostatic Separation for Fine Coal Cleaning, U.S. Department of Energy Federal Energy Technology Center, pp. 4-9
  8. 박철현, 전호석, 김완태, 박재구, 2005, 정전선별법을 이용한 폐전선 피복 플라스틱 재질분리, 한국폐기물학회지, 22(2), pp. 138-144
  9. Erno Nemetha,Victoria Albrechtb, Gert Schuberta, Frank Simonb, Polymer Tribo-Electric Charging: Dependence or Thermodynamic Surface Properties and Relative Humidity, Journal of Electrostatics, Published by Elsevier Science B. V., 2002