References
-
S. Schlag and H.F. Eicke, 'Size driven phase transition in nanocrystalline
$BaTiO_3$ ', Solid State Communications 91 (1994) 883 https://doi.org/10.1016/0038-1098(94)90007-8 - A.J. Moulson and J.M. Herbert, 'Electroceramics: materials properties and applications', Chapman and Hall, London (1990)
- H.A. Sauer and J.R. Fisher, 'Processing of positive-temperature-coefficient themistors', J. Am. Ceram. Soc. 43 (1960) 297
- W. Heywang, 'Semiconducting barium titanate', J. Mater. Sci. 6 (1971) 1214 https://doi.org/10.1007/BF00550094
- B. Huybrechts, K. Ishizaki and M. Tanaka, 'The positive temperature coefficient or resistivity in barium titanate', J. Mater. Sci. 30 (1995) 2463 https://doi.org/10.1007/BF00362121
- Y. Ohara, K. Koumoto and H. Yanagida, 'Barium titanate ceramics with high piezoelectricity fabricated from fibrous particles', J. Am. Ceram. Soc. 68 (1985) C-108
- G.A. Smolenskii, 'Ferroelectrics and Related Materials', Gordon and Breach, New York (1984)
-
L.K. Templeton and J.A. Pask, 'Formation of
$BaTiO_3$ from$BaCO_3$ and$TiO_2$ in air and in$CO_2$ ', J. Am. Ceram. Soc. 42 (1959) 212 https://doi.org/10.1111/j.1151-2916.1959.tb15455.x -
A. Beauger, J.C. Mutin and J.C. Niepce, 'Role and behavior of orthotitanate
$Ba_2TiO_4$ during the processing of$BaTiO_3$ based ferroelectric ceramics', J. Mat. Sci. 19 (1984) 195 https://doi.org/10.1007/BF02403126 - J.C. Niepce and G. Thomas, 'About the mechanism of the solid-way synthesis of barium metatitanate. Industrial consequences', Solid. State. Ionics. 43 (1990) 69
- P.P. Phule and S.H. Risbud, 'Sol-gel synthesis of barium titanate. powders using barium acetate and titanium (IV) isopropoxide', Adv. Ceram. Mater. 3 (1988) 183 https://doi.org/10.1111/j.1551-2916.1988.tb00197.x
-
G.J. Choi, H.S. Kim and YS. Cho, '
$BaTiO_3$ particles prepared by microwave-assisted hydrothermal reaction using titanium acylate precursors', Mater. Lett. 41 (1999) 122 https://doi.org/10.1016/S0167-577X(99)00117-2 -
C.T. Xia, E.W. Shi, W. Zhong and J. Guo, 'Preparation of
$BaTiO_3$ by the hydrothermal method', J. Eur. Ceram. Soc. 15 (1995) 1171 https://doi.org/10.1016/0955-2219(95)00101-8 -
S. Urek and M. Drofenik, 'The hydrothermal synthesis of
$BaTiO_3$ fine particles from hydroxide-Alkoxide precursors', J. Eur. Ceram. Soc. 18 (1998) 279 - M.M. Lencka and R.E. Riman, 'Thermodynamics of the hydrothermal synthesis of calcium titanate with reference to other alkaline-earth titanates', Chem. Mater. 7 (1995) 18
- T.F. Lin and C.T. Hu, 'Influence of stoichiometry on the microstructure and positive temperature coefficient of resistivity of semiconducting barium titanate ceramics', J. Am. Ceram. Soc. 73 (1990) 531 https://doi.org/10.1111/j.1151-2916.1990.tb06549.x
- P.K. Gallagher and F. Schrey, 'Thermal decomposition of some substituted barium titanyl oxalated and its effect on the semiconducting properties of the doped materials', J. Am. Ceram. Soc. 46 (1985) 567 https://doi.org/10.1111/j.1151-2916.1963.tb14617.x
- T.T. Fang and H.B. Lin, 'Factors affecting the preparation of barium titanyl oxalate tetrahydrate', J. Am. Ceram. Soc. 72 (1989) 1899 https://doi.org/10.1111/j.1151-2916.1989.tb05998.x
-
M. Rajendran and M.S. Rao, 'Formation of
$BaTiO_3$ from citrate precursor', J. Solid. State Chem. 113 (1994) 239 https://doi.org/10.1006/jssc.1994.1366 - T.J. Carbone and J.S. Reed, 'Microstructure development in barium titanate: effects of physical and chemical inhomogenieties', Am. Ceram. Soc. Bull. 58 (1979) 512
- S. Venigalla, 'Advanced materials and powders-barium titanate,' Am. Ceram. Soc. Bull. 6 (2001) 63
- J. Jean and H. Wang, 'Dispersion of aqueous barium titanate suspensions with ammonium salt of poly(methacrylic acid)', J. Am. Ceram. Soc. 81 (1998) 1589 https://doi.org/10.1111/j.1151-2916.1998.tb02521.x
- C. Chiang and J. Jean, 'Effects of barium dissolution on dispersing aqueous barium titanate suspensions', Mater Chem. Phys. 80 (2003) 647 https://doi.org/10.1016/S0254-0584(03)00088-9
- U. Paik and V. Hackely, 'Influence of solids concentration on the isoelectric point of aqueous barium titanate', J. Am. Ceram. Soc. 83 (2000) 2381 https://doi.org/10.1111/j.1151-2916.2000.tb01565.x
- S.J. Gregg and K.S.W Sing, 'Adsorption, surface area and porosity', second ed., Academic Press, London (1982)
- H.W. Nesbitt, G.M. Bancroft, W.S. Fyfe, S.N. Karkhanis, A. Nishima and S. Shin, 'Thermodynamic stability and kinetics of perovskite dissolution', Nature 289 (1981) 358 https://doi.org/10.1038/289358a0
- S. Myhra, D. Savage, A. Atkinson and J.C. Riviere, 'Surface modification of some titanate minerals subjected to hydrothermal chemical attack', Am. Mineral. 69 (1984) 902
- S. Kumar, V.S. Raju and T.R.N. Kutty, 'Investigation on the chemical states of sintered barium titanate by X-ray photoelectron spectroscopy', Applied Surf. Sci. 206 (2003) 250
- M.C. Blanco Lopez, G. Fourlaris and F.L. Riley, 'Interaction of barium titanate powders with an aqueous suspending medium', J. Euro. Ceram. Soc. 18 (1998) 2183 https://doi.org/10.1016/S0955-2219(98)00139-3
- S. Sameshima, H. Yoshihiro and E. Yuka, 'Structural change in Sm- and Nd-doped ceria under a low oxygen partial pressure', J. Alloys and Compounds (2005)