References
- Bohez, E., Makhanov, S.S. and Sonthipermpoon, K. (2000), Adaptive nonlinear tool path optimization for five-axis machining, Int. J. Prod. Res., 38(17), 4329-4343 https://doi.org/10.1080/00207540050205127
- Bohez, E.L.J., Hong Minh, N.T., Ben Kiatsrithana, Peeraphan Natasukon, Huang, R.Y. and Le Thanh Son. (2003), The stencil buffer sweep plane algorithm for 5-axis CNC tool path verification, Computer-Aided Design, 35(12), 1129-42 https://doi.org/10.1016/S0010-4485(02)00209-9
- Makhanov, S.S. and Ivanenko, S.A. (2003), Grid generation as applied to optimize cutting operations of a five-axis milling machine, Applied Numerical Mathematics, 46, 353-377 https://doi.org/10.1016/S0168-9274(03)00038-2
- Makhanov, S.S., Batanov, D., Bohez, E., Sonthipaumpoon, K., Anotaipaiboon, W. and Tabucanon M. (2002), On the tool-path optimization of a milling robot, Computers & Industrial Engineering, 43, 455-472 https://doi.org/10.1016/S0360-8352(02)00118-3
- Choi, B.K., Park, J.W. and Jun, C.S. (1993), Cutter-location data optimization in 5-axis surface machining, Computer-Aided Design, 25(6), 377-386 https://doi.org/10.1016/0010-4485(93)90033-K
- Lee, Y.S., Choi, B.K. and Chang, T.C. (1992), Cut distribution and cutter selection for sculptured surface cavity machining, Int. J. Prod. Res., 30(6), 1447-1470 https://doi.org/10.1080/00207549208942966
- Lee, Y.S. (1998), Mathematical modeling using different end mills and tool placement problems for 4 and 5-axis complex surface machining, Int. J. Prod. Res., 36(3), 785-814 https://doi.org/10.1080/002075498193697
- Lee, Y.S. and Chang, T.C. (1996), Automatic cutter selection for 5-axis sculptured surface machining. Int. J. Prod. Res., 34(4), 977-998 https://doi.org/10.1080/00207549608904946
- Chiou, C.J. and Lee, Y.S. (2002), A machining potential field approach to tool path generation for multi-axis sculptured surface machining, Computer-Aided Design, 34, 357-371 https://doi.org/10.1016/S0010-4485(01)00102-6
- Lee, S.G. and Yang, S.H. (2002), CNC tool path planning for high-speed high-resolution machining using a new tool-path calculation algorithm, Int. J. Adv. Manuf. Technol. 20, 326-333 https://doi.org/10.1007/s001700200159
- Xu, X.J., Bradley, C., Zhang, Y.F., Loh, H.T. and Wong, Y.S. (2002), Tool-path generation for five-axis machining of free-form surfaces based on accessibility analysis, Int. J. Prod. Res., 40(14), 3253-3274 https://doi.org/10.1080/00207540210150643
- Elber G. Freeform surface region optimization for 3-axis and 5-axis milling. (1994), Computer-Aided Design, 27(6), 465-470
- Loney, G.C. and Ozsoy, T.M. (1987), NC machining of free form surfaces, Computer-Aided Design, 19(2), 85-90 https://doi.org/10.1016/S0010-4485(87)80050-7
- Rao, N., Ismail, F. and Bedi, S. (2000), Integrated tool positioning and tool path generation for five-axis machining of sculptured surfaces, Int. J. Prod. Res., 38(12), 2709-2724 https://doi.org/10.1080/002075400411448
- Marciniak, K. (1987), Influence of surface shape on admissible tool positions in 5-axis face milling, Computer -Aided Design, 19(5), 233-36 https://doi.org/10.1016/0010-4485(87)90260-0
- Faux, I.D. and Pratt, M.J. (1979), Computational Geometry for Design and Manufacturing, Ellis Horwood Limited
- Piegl, L.A. and Tiller, W. (1997), The NURBS book, 2nd Ed., Springer
- Wang, Y. and Tang, X. (1999), Five-Axis NC machining of sculptured surface, Int. J. of Adv. Manuf. Technol., 15, 7-14 https://doi.org/10.1007/s001700050033
- Aekambaram, R. and Raman, S. (1999), Improved tool path generation, error measures and analysis for sculptured surface machining, Int. J. of Prod. Res., 37(2), 413-431 https://doi.org/10.1080/002075499191841
- Jensen, C.G., Red, W.E. and Pi, J. (2002), Tool selection for five-axis curvature matched machining, Computer-Aided Design, 34, 251-266 https://doi.org/10.1016/S0010-4485(01)00086-0
- Kruth, J.P. and Klewais, P. (1994), Optimization and dynamic adaption of the cutter inclination during five-axis milling of sculptured surfaces, Annals of the CIRP, 43, 443-448 https://doi.org/10.1016/S0007-8506(07)62249-5
- Lauwers, B., Kruth, J.P. and Dejonghe, P. (2001), An operation planning system for multi-axis milling of sculptured surfaces, Int. J. Adv. Manuf. Technol., 17, 799-804 https://doi.org/10.1007/s001700170106
- Yoon, J.H., Pottrnann, H. and Lee, Y.S. (2003), Locally optimal cutting positions for 5-axis sculptured surface machining. Computer-Aided Design, 35, 69-81 https://doi.org/10.1016/S0010-4485(01)00176-2
- Lo, C.C. (1999), Efficient cutter path planning for five-axis surface machining with a flat-end cutter, Computer-Aided Design, 31, 557-566 https://doi.org/10.1016/S0010-4485(99)00052-4
- Kim, T. and Sarma, S.E. (2002), Toolpath generation along directions of maximum kinematics performance; a first cut at machine-optimal paths, Computer-Aided Design, 34, 453-468 https://doi.org/10.1016/S0010-4485(01)00116-6
- Feng, H.Y. and Li, H. (2002), Constant scallop-height tool path generation for three-axis sculptured surface machining, Computer-Aided Design, 34, 647-654 https://doi.org/10.1016/S0010-4485(01)00136-1
- Tournier, C. and Due, E. (2002), A surface based approach for constant scallop height too-path generation, Int. J. Adv. Manuf Technol., 19, 318-24 https://doi.org/10.1007/s001700200019
- Tam, H.Y., Xu, H. and Zhou, Z. (2001), Iso-planar interpolation for the machining of implicit surface, Computer-Aided Design, 33, 307-319 https://doi.org/10.1016/S0010-4485(01)00059-8
- Lartigue, C., Thiebaut, F. and Maekawa, T. (2002), CNC tool path in terms of B-spline curves, Computer-Aided Design, 34, 453-468 https://doi.org/10.1016/S0010-4485(00)00090-7
- Piegl, L. and Tiller, W. (1999), Computing offsets of NURBS curves and surfaces, Computer-Aided Design, 31,147-156 https://doi.org/10.1016/S0010-4485(98)00066-9
- Suh, S.H. and Shin, Y.S. (1996), Neural network modeling for tool path planning of the rough cut in complex pocket milling, Journal of Manufacturing Systems, 15, 295-324 https://doi.org/10.1016/0278-6125(96)84192-6
- Jeong, J. and Kim, K. (1999), Generating tool paths for free-form pocket machining using z-buffer-based Voronoi diagram, Advanced Manufacturing Technology, 15, 182-187 https://doi.org/10.1007/s001700050055
- Sarma, R. (2000), An assessment of geometric methods in trajectory synthesis for shape creating manufacturing operations, Journal of Manufacturing Systems, 19, 59-72 https://doi.org/10.1016/S0278-6125(00)88890-1
- Shi, J. and Malik, J. (2000), Normalized cuts and image segmentation, IEEE Trans. on Pattern Analysis and Machine Intelligence, 20(8), 888-905 https://doi.org/10.1109/34.868688
- Chen, J.L., Bai, Z., Hamann, B. and Ligocki, T.J. (2003), A Normalized-cut algorithm for hierarchical vector field data segmentation, Visualization and Data Analysis Proceedings, 79-90 https://doi.org/10.1117/12.477521
- Kaufman, L. and Rousseeuw, P.J. (1990), Finding groups in data, John Wiley & Sons
- Jain, A.K. and Dubes, R.C. (1988), Algorithms for clustering data, Prentice Hall
- Jeong, J. and Hussain. (1995), On the identification of a vortex, Journal of Fluid Mechanics, 285, 69-94 https://doi.org/10.1017/S0022112095000462
- Kenwright, D. and Haimes, R. (1997), Vortex identification-applications in aerodynamics: a case study, IEEE Visualization '97 Proceedings, 413-416
- Sujudi, D. and Haimes, R. (1995), Identification of swirling flow in 3D vector fields, AIAA Computational Fluid Dynamics Proceedings, 95-1715