Abstract
Currently, ECDIS and GPS plotters are much used as equipment providing operators with route information, but they do not have any function of automatic route creation and route explanation, so available for only experienced operators. Especially, the present situation is that no study is made of the automatic route creation and route explanation using ENC for ECDIS, substitution system of paper chart. ENC is the electronic navigation chart that is produced using S-52, 5-57 standard format required by IHO. In this paper, an Navigation Guiding System(NGS) is proposed to generate an optimal route where ENC and GPS data is fusioned including the wind direction and speed of an anemometer. The proposed system was testified by a simulation, and its effectiveness was verified.
현재 선박에서 항해사에게 항로정보를 제공하는 장비는 ECDIS와 GPS 플로터가 많이 사용되고 있으나 자동항로생성 및 항로설명기능이 없어 숙련된 항해사만 사용할 수 있는 문제가 있으며, 특히 종이해도의 대체 시스템인 ECDIS에 사용되는 ENC를 이용한 자동항로생성 및 항로설명에 관한 연구는 없는 실정이다. ENC는 IHO에서 정의한 S-52, S-57 표준포멧을 기반으로 제작된다. 본 논문에서는 ENC의 해도데이터와 GPS의 위치데이터, Anemometer의 풍향${\cdot}$풍속데이터를 이용하여 현 위치에서 목적지까지의 최적항로를 설계하여 안내해주는 항해안내시스템(NGS)을 구축하였고 시뮬레이션을 통하여 그 유효성을 확인하였다.