한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제13권4호
  • /
  • Pages.32-38
  • /
  • 2005
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

야지 차량용 No Spin Differential의 평가방안 개발 및 시험평가에 관한 연구

A Study on Development of Test Methodology and Test of No Spin Differential for Off-road Vehicle

  • 편영식 (선문대학교 기계및제어공학부) ;
  • 장영도 (인천기능대학 컴퓨터응용기계설계과) ;
  • 박정현 (선문대학교 기계및제어공학부) ;
  • 조인호 (선문대학교 대학원) ;
  • 이영춘 (진흥기계㈜)
  • Pyoun Youngshik (Department of Mechanical Engineering, Sun Moon University) ;
  • Jang Youngdo (Department of Mechanical Design, Incheon Polytechinc College) ;
  • Park Jeonghyeon (Department of Mechanical Engineering, Sun Moon University) ;
  • Cho Inho (Department of Mechanical Engineering, Graduate School, Sun Moon University) ;
  • Lee Youngchun (Jinheung Machinary Co.,)
  • 발행 : 2005.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Two No Spin Differential(NSD) models were benchmarked for a project of Dual-Use Technology The Axiomatic approach was utilized to evaluate two models and to derive an evolutionary design from the evaluated results. Test methodology is developed and used to evaluate the mobility, steerability, durability and noise of the newly developed sample. The test results of NSD sample on the test methodology are very positive regarding functional performances.

키워드

참고문헌

  1. Y. C. Lee, Y. C. Kim, J. H. Park and J. T. Kim, 'Research and Development about a Differential System for a Slip Limitation of an Off-road Vehicles,' Ministry of Commerce, Industry and Energy, pp.42-43, 2002
  2. Y. C. Lee, 'NSD Annual Project Report 2000,' Dual Use Technology Center, pp.103-108, 2000
  3. Y. S. Pyoun, Y. D. Jang, Y. C. Lee, H. J. Park and J. W. Yeo, 'A Study on the Development of No Spin Differential for an Off-road Vehicle,' Transactions of KSAE, Vol.11, No.6, pp.127-133, 2003
  4. Military Standard-2320-1007-4, 1997
  5. Y. C. Park, D. P. Yun, S. C. Hue, D. B. Jin and B. J. Lee, 'The study of safety Evaluation of Improvement on Lower ARM( II ),' Transactions of KSAE, Vol.6, No.3, pp.18-25, 1998
  6. J. E. Yun and M. S. Chon, 'Safety Estimation of Engine Lubrication System using Tilting Test Ring,' Transactions of KSAE, Vol.10, No.4, pp.1-6, 2002
  7. K. H. Ko, S. J. Heo and H. Kook, 'Evaluation of Road-Induced Noise of A Vehicle using Experimental Approach,' Int. J. Automotive Engineers, Vol.4, No.1, pp.21-30, 2003