A Study of Dynamic Characteristic far Resistance Spot Welding Process Using Servo-gun System

서보건 이용 시 저항 점 용접의 동특성 분석에 관한 연구

  • Baek Jung-Yeub (Department of Precision Mechanical Engineering, Hanyang University) ;
  • Lee Jong-Gu (Computer Aided Mould & Die Design, Jeonbuk Human Resources Development Institute) ;
  • Rhee Se-Hun (School of Mechanical Engineering, Hanyang University)
  • 백정엽 (한양대학교 공과대학 정밀기계공학과) ;
  • 이종구 (대한상공회의소 전북인력개발원 컴퓨터응용 금형설계학과) ;
  • 이세헌 (한양대학교 공과대학 기계공학부)
  • Published : 2005.06.01

Abstract

Air gun has been one of the good tools to press two sheet metals. However, it is not easy to control the acting force precisely. A Servo-gun is a good tool to control the acting force on the workpiece comparing with the air gun. Servo-gun has a higher tensile shear strength and lower indentation depth as well as smaller spatter. Dynamic resistance was obtained according to the acting force and welding current. As the acting force was changed during welding, the welding quality was increased.

Keywords

References

  1. R. B. Hirsch : Tip Force Control Equals Spot Weld Quality, Welding Journal, 72-3 (1993), 57-60
  2. K. Suita, et al. : Current Status of a Spot-welding Gun for Automobile Body Assembly Lines Incorporating a State of the Art Integrated Servo-motor, Journal-Society of Automotive Engineers of Japan, 50-12 (1996), 57-63
  3. J. H. Park : Force Control for the Improvement of Weld Qualities in Resistance Spot Welding Process, Master thesis, Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (1998)
  4. S. A Slavick: Using Servoguns for Automated Resistance Welding, Welding Journal, 78-7 (1999), 29-33
  5. H. Tang, et al. : Servo Guns for Resistance Spot Welding, Society of Automotive Engineers: SAE 2000 world congress (Mar 2000), 2000-01-1289
  6. C. S. Lim and H. S. Chang : Spot Welding of Aluminum Alloys Using Servogun, Journal of KWS, 22-4 (2004). 43-49 (in Korean)
  7. M. Kimchi : Spot Weld Properties When Welding with Expulsion - Comparative Study, Welding Journal, 63-2 (1984), 58-63
  8. G. S. Kim, J. W. Kim, C. Y. Won and S. W. Choi : Servo Gun-type Inverter Spot Welding System, Journal of Korean Institute of power electronics, 8-5 (2003), 397-406 (in Korean)
  9. Y. Cho and S. Rhee : New Measuring Technology of Dynamic Resistance and Strength Estimation in Resistance Spot Welding, Measurement Science and Technology, 11-8 (2000), 1173-1178 https://doi.org/10.1088/0957-0233/11/1/302
  10. N. R. Duchar, R. K. Choen, H. A, Nied and S, J. Godwin : A Closed Loop Control System for Resistance Spot Welding, Measurement and Control for Batch Manufacturing ASME 103rd Winter Annual Meeting, Phoenix Arizona (1982), 89-103
  11. Y. Cho, S. Rhee and K. Um : A Study of Real- Rime Weldability Estimation of Resistance Spot Welding using Fuzzy Algorithm, Journal of KWS, 16-5 (1998), 76-85 (in Korean)
  12. Recommended Practices for Automotive Weld Quality-Resistance Spot Welding, Supersedes AWS D8.7-78, SAE J-1188, An American National Standard
  13. J. Min, Y. Oh and G. Kim : A Study on the Spot Weldability of Automotive Steel Sheets, Journal of KWS, 14-3 (1996), 41-47 (in Korean)