References
- Green, O. V., 1930, 'Stress Intensity Factor due to the Initial Residual Stress in Weldments,' Trans. of American Society for Steel Treating, Vol. 18, p. 369
- Irwin, G. R., 1957, 'Analysis of Stress and Strains Near the End of a Crack Traversing a plates,' Trans. ASME, Vol. 24, p. 361
- Lee, Y. B., Chung, C. S., and Cho, N. I., 1996, 'A Study on Fatigue Behavior Considering Effects of Redistributing Tensile Residual Stress and Crack Closure in SS330 Weldment,' J. of KSME(A), Vol. 20, No. 7, pp. 2234-2245
- Lee, Y. B., Chung, C. S., Kim, H. K., Cho, N. I., and Park, S. H., 1997, 'A Study on Fatigue Behavior concidering Effects of Redistributing Compressive Residual Stress and Crack Closure in SS330 Weldment,' J. of KSMTE, Vol. 6, No. 2, pp. 26-33
- Lee, Y. B., Chung, C. S., Kim, Y. H., and Kim, H. K., 1997, 'A Study on the Fatigue Crack Propagation Behavior of Spot Welds under Tensile-Shear Load,' J. of KSMTE, Vol. 6, No. 4, pp. 27-33
- Juvinall, R.C., 1967, Engineering Considerations of Stress Strain and Strength, McGraw-Hill
- Collins, J. A., 1981, Failure of Materials in Mechanical Design, Willy Interscience
- Osgood, C. C., 1982, Fatigue Design 2nd ed., Pergamon Press
- Isida, M., 1930, 'On the Determination of Stress Intensity Factors for Some Common Structural Problems,' Eng. Fracture Mechanics, Vol. 2, No. 1, p. 61 https://doi.org/10.1016/0013-7944(70)90030-5
- Devine, M. K., 1992, 'The Magnetic Detection of Materials Properties,' J. of Material, Vol. 44(10), pp. 24-30
- Newman Jr. J. C., 1975, 'Fracture Analysis of Surface and Through Cracked Sheets and Plates,' Engineering Fracture Mechanics, Vol. 5, pp. 667-689 https://doi.org/10.1016/0013-7944(73)90046-5
- Irwin, I. R., 1962, 'Crack Extension Force for a part-Through Crack in a Plate,' J. of Applied Mech., Vol. 29, No. 4, pp. 651-654
- Kim, S. C., and Lee, Y. B., 1987, 'The Application of Forman Equation for Fatigue Crack Propagation in Welding Residual Stress Region,' J. of the Korean Welding Society, Vol. 5, No. 1, pp. 42-56
- Lee, Y. B., Chung, C. S., and Park, Y. K., and Kim, H. K., 1998, 'Effect of Redistributing Residual Stress on the Fatigue Behavior of SS330 Weldment,' Int. J. Fatigue, Vol. 20, No. 8, pp. 565-573 https://doi.org/10.1016/S0142-1123(98)00024-3
- Paris, P., and Erdogan, F., 1963, 'A Critical Analysis of Crack Propagation Law,' J. of Basic Eng., Trans. of ASME, Vol. 8 pp. 528-534
- Lee, Y. B., Cho, N. I., and Park, K. E., 1996, 'A Study on Surface Fatigue Crack Behavior of SS400 Weldment,' J. of KWS, Vol. 14, No. 2, pp. 124-129
- Forman, R. G., and Kearney, V.E., 1967, 'Numerical Analysis of Crack Propagation in Cyclic Loaded Structures,' J. of Basic Eng., Trans. of ASME, Vol. 9, pp. 459-464