대한전기학회논문지:전력기술부문A (The Transactions of the Korean Institute of Electrical Engineers A)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

회전기의 기여에 의한 시변성의 순간전압강하 예측에 관한 연구

Investigation of the Estimation of Time-Varying Voltage Sags Considering the Short Circuit Contributions of Rotating Machines

  • 발행 : 2005.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this article, 1 would like to explore the estimation method of time-varying voltage sags in large industrial systems considering the short circuit contributions of rotating machines. For the power distribution system of KEPCO(Korea Electric Power Corporation), the magnitude of initial symmetrical short circuit current is generally not changed. However, in industrial systems which contain a number of rotating machines, the magnitude of voltage sag is generally changed from the initial to the clearing time of a fault due to the decreasing contribution of rotating machines for a fault current. The time-varying characteristics of voltage sags can be calculated using a short circuit analysis that is considered the time-varying fault currents. For this, the prediction formulations of time-varying voltage sags are proposed using a foreign standard. The proposed method contains the consideration of generator and motor effects. For the test of proposed formulations, a simple system of industrial consumer is used for the comparison conventional and proposed estimation method of voltage sag characteristics.

키워드

참고문헌

  1. T.S. Key, 'Diagnosing power-quality related computer problems,' IEEE Trans. on Ind. Appl., vol. 15, no. 4, pp. 381-393, Jul. 1979 https://doi.org/10.1109/TIA.1979.4503677
  2. L. E. Conrad and Math H. J. Bollen, 'Voltage sag coordination for reliable plant operation,' IEEE Trans. on Ind. Appl., vol. 33, no. 6, pp. 1459-1464, Nov./Dee. 1997 https://doi.org/10.1109/28.649956
  3. D. L. Brooks, et al., 'Indices for assessing utility distribution system RMS variation performance,' IEEE Trans. on PWRD, vol. 13, no. 1, pp. 254-259, Jan. 1998 https://doi.org/10.1109/61.660886
  4. C. J. Melhorn, T. D. Davis, and G. E. Beam, 'Voltage sags: their impact on the utility and industrial customers.' IEEE Trans. on Ind. Appl., vol. 34, no. 3, pp. 549-558, May/Jun. 1998 https://doi.org/10.1109/28.673725
  5. L. E. Conrad et al., 'Proposed chapter 9 for predicting voltage sags (dip) in revision to IEEE Std 493, the Gold Book,' IEEE Trans. Industry Applications, Vol. 30, No. 3, pp. 805-821, May/June 1994 https://doi.org/10.1109/28.293731
  6. L. Zhang and Math H. J. Bollen, 'Characteristic of voltage dips(sags) in power systems,' IEEE Trans. on PWRD, vol. 15, no. 2, pp. 827-832, Apr. 2000 https://doi.org/10.1109/61.853026
  7. P. Heine, P. Pohjanheimo, and E. Lakervi, 'A method for estimating the frequency and cost of voltage sags,' IEEE Trans. on PWRS, vol. 17, no. 2, pp. 290-296, May 2002 https://doi.org/10.1109/TPWRS.2002.1007895
  8. P. Heine and M. Lehtonen, 'Voltage sag distributions caused by power system faults,' IEEE Trans. on PWRS, vol. 18, no. 4, pp. 1367-1373, Nov. 2003 https://doi.org/10.1109/TPWRS.2003.818606
  9. IEEE recommended practice for monitoring electric power quality, IEEE Std. 1159, 1995
  10. J. J. Grainger and W. D. Stevenson, Jr., Power system analysis, McGraw-Hill, 1994
  11. IEEE recommended practice for electric power distribution for industrial plants, ANSI/IEEE Std. 141., 1986
  12. Short-circuit currents in three-phase a.c. systems-Part 0: calculation of currents, IEC 60909-0, 2001
  13. 의제 편집위원회, 신 전기설비 기술계산 핸드북(제 2판), 도서출판 의제, 1999년
  14. LS산전(주) 홈페이지, http://www.lsis.biz