Temperature Analysis for the Linear Cell in the Vapor Deposition Process

  • Choi Jongwook (School of Mechanical and Automotive Engineering, Sunchon National University) ;
  • Kim Sungcho (School of Mechanical and Automotive Engineering, Sunchon National University) ;
  • Kim Jeongsoo (School of Mechanical and Automotive Engineering, Sunchon National University)
  • Published : 2005.06.01

Abstract

The OLED (Organic Light Emitting Diodes) display recently used for the information indicating device has many advantages over the LCD (Liquid Crystal Display), and its demand will be increased highly. The linear cell should be designed carefully considering the uniformity of thin film on the substrate. Its design needs to compute the temperature field analytically because the uniformity for the thin film thickness depends on the temperature distribution of the source (organic material). In the present study, the design of the linear cell will be modified or improved on the basis of the temperature profiles obtained for the simplified linear cell. The temperature distributions are numerically calculated through the STAR-CD program, and the grids are generated by means of the ICEM CFD program. As the results of the simplified linear cell, the temperature deviation was shown in the parabolic form among the both ends and the center of the source. In order to reduce the temperature deviation, the configuration of the rectangular ends of the crucible was modified to the circular type. In consequence, the uniform temperature is maintained in the range of about 90 percent length of the source. It is expected that the present methods and results on the temperature analysis can be very useful to manufacture the vapor deposition device.

Keywords

References

  1. Burroughes, J. H., Bradley, D. D. C., Brown, A. R., Marks, R. N., Maackay, K., Friend, R. H., Burns, P. L. and Holmes, A. B., 1990, 'Light-Emitting Diodes based on Conjugated Polymers,' Nature, Vol. 347, pp. 539-541 https://doi.org/10.1038/347539a0
  2. Choi, J. W., Kim, S. C. and Jung, H., 2004, 'Temperature Analysis for the Point-Cell Source in the Vapor Deposition Process,' KSME International Journal, Vol. 18, No. 9, pp. 1680-1688
  3. Granstrom, M. and Inganas, 1996, 'White Light Emission from a Polymer Blend Emitting Diode,' Applied Physics Letter, Vol. 68, No. 2, pp.147-149 https://doi.org/10.1063/1.116129
  4. Hamada, Y., Sano, T., Shibata, K. and Kuroki, K., 1995, 'Influence of the Emission Site on the Running Durability of Organic Electroluminescent Devices,' Japanese Journal of Applied Physics, Vol. 34, pp. L824- L826 https://doi.org/10.1143/JJAP.34.L824
  5. ICEM CFD Reference Manual (version 4.2), 2000, ICEM Engineering
  6. Incropera, F. P. and DeWitt, D. P., 2002, Fundamentals of Heat and Mass Transfer, John Wiley & Sons Inc., pp. 903-967
  7. Kido, J., Hongawa, K., Okuyama, K. and Nagai, K., 1994, 'White Light-Emitting Organic Electroluminescent Devices using the Poly (N-Vinylcarbazole) Emitter Layer doped with Three Fluorescent Dyes,' Applied Physics Letters, Vol. 64, No. 7, pp. 815-817 https://doi.org/10.1063/1.111023
  8. Smith, D. L., 1994, Thin-Film Deposition Principles and Practice, McGraw-Hill, pp. 63-118
  9. STAR-CD Methodology (version 3.15), 2001, Computational Dynamics Limited, chap. 9
  10. STAR-CD Tutorials (version 3.15), 2001, Computational Dynamics Limited, chap. 12
  11. STAR-CD User Guide (version 3.15), 2001, Computational Dynamics Limited
  12. Tang, C. W. and VanSlyke and S. A. Organic electroluminescent diodes. Appl. Phys. Lett., 51, 913 (1987) https://doi.org/10.1063/1.98799
  13. Tang. C. W, VanSlyke, S. A. and Chen, C. H. Electroluminescent of doped organic thin films. J. Appl. Phys, 65, 3610 (1989) https://doi.org/10.1063/1.343409
  14. Tokito, S., Takata, J. and Taga, Y., 1995, 'Organic/Inorganic Superlattices with Ordered Organic Layers,' Journal of Applied Physics, Vol. 77, No. 5, pp. 1985-1989 https://doi.org/10.1063/1.358834