References
- Sparrow, E.M. and Wong, T.C., 1975, 'Impingement Transfer Coefficients Due to Initially Laminar Slot Jets,' Int. J. Heat Mass Transfer, Vol. 18, pp. 597-605 https://doi.org/10.1016/0017-9310(75)90271-9
- Chung, Y.M., Luo, K.H. and Sandham, N.D., 2002, 'Numerical Study of Momentum and Heat Transfer in Unsteady Impinging Jets,' Int. J. Heat Fluid Flow, Vol. 23, pp. 592-600 https://doi.org/10.1016/S0142-727X(02)00155-8
- Chiriac, V.C. and Ortega, A., 2002, 'A Numerical Study of the Unsteady Flow and Heat Transfer in a Transitional Confined Slot Jet Impinging on an Isothermal Surface,' Int. J. Heat Mass Transfer, Vol. 45, pp. 1237-1248 https://doi.org/10.1016/S0017-9310(01)00224-1
- Bouainnouche, M., Bourabaa, N. and Desmet, B., 1997, 'Numerical Study of the Wall Shear Stress Produced by the Impingement of a Plane Turbulent Jet on a Plate' Int. J. Numerical Method for Heat & Fluid Flow, Vol. 7, pp. 548-564 https://doi.org/10.1108/09615539710367297
- Chen, M., Chalupa, R., West, A.C. and Modi, V., 2000, 'High Schmidt Mass Transfer in a Laminar Impinging Slot Jet Flow,' Int. J. Heat Mass Transfer, Vol. 43, pp. 3907-3915 https://doi.org/10.1016/S0017-9310(00)00052-1
- Beitelmal, A.H., Saad, M.A. and Patel, C.D., 2000, 'The Effect of Inclination on the Heat Transfer Between a Flat Surface and an Impinging Two-dimensional Air Jet,' Int. J. Heat & Fluid Flow, Vol. 21, pp. 156-163 https://doi.org/10.1016/S0142-727X(99)00080-6
- Phares, D.J., Smedley, G.T. and Flagan, R.C., 2000, 'The Wall Shear Stress Produced by the Normal Impingment of a Jet on a Flat Surface,' J. Fluid Mech., Vol. 418, pp. 351-375 https://doi.org/10.1017/S002211200000121X
- Chattopadhyay, H. and Saha, S.K., 2001, 'Numerical Investigation of Heat Transfer over a Moving Surface due to Impinging Knife-Jets,' Numerical Heat Transfer, Part A, Vol. 39, pp. 531-549 https://doi.org/10.1080/104077801750111629
- Hwang, S.D., Lee, C.H. and Cho, H.H., 2001, 'Heat Transfer and Flow Structures in Axisymmetric Impinging Jet Controlled by Vortex Paring,' Int. J. Heat and Fluid Flow, Vol. 22, pp. 293-300 https://doi.org/10.1016/S0142-727X(01)00091-1
- Choo, Y. and Kang, B., 2002, 'The Velocity Distribution of the Liquid Sheet Formed by Two Low-Speed Impinging Jets,' Phys. Fluids, Vol. 14, No. 2, pp. 622-627 https://doi.org/10.1063/1.1429250
- Aldabbagh, L.B.Y. and Sezai, I., 2002, 'Numerical Simulation of Three-dimensional Laminar Multiple Impinging Square Jets,' Int. J. Heat Fluid Flow, Vol. 23, pp. 509-518 https://doi.org/10.1016/S0142-727X(02)00141-8
- Beaubert, F. and Viazzo, S., 2003, 'Large Eddy Simulation of Plane Turbulent Impinging Jets at Moderate Reynolds Numbers,' Int. J. Heat Fluid Flow, Vol. 24, pp. 512-519 https://doi.org/10.1016/S0142-727X(03)00045-6
- Chattopadhyay, H. and Saha, S.K., 2003, 'Turbulent Flow and Heat Transfer from a Slot Jet Impinging on a Moving Plate,' Int. J. Heat and Fluid Flow, Vol. 24, pp. 685-697 https://doi.org/10.1016/S0142-727X(03)00062-6
- Ha, M.Y., Lee, H.G. and Seong, S.H., 2003, 'Numerical Simulation of Three-dimensional Flow, Heat Transfer and Solidification of Steel in Continuous Casting Mold with Electromagnetic Brake,' J. Material Processing Tech. Vol. 133, pp. 322-339 https://doi.org/10.1016/S0924-0136(02)01009-9
- Yoon, H.S., Chun, H.H., Ha, M.Y. and Lee, H.G., 2004, 'A Numerical Study on the Fluid Flow and Heat Transfer Around a Circular Cylinder in an Aligned Magnetic Fields,' Int. J. Heat Mass Transfer, Vol. 47, pp. 4075-4087 https://doi.org/10.1016/j.ijheatmasstransfer.2004.05.015
- Kim, J. and Moin, P., 1985, 'Application of a Fractional-step Method to Incompressible Navier-stokes Equations,' J. of Comp. Phys. Vol. 59, pp. 308-323 https://doi.org/10.1016/0021-9991(85)90148-2
- Lee, H.G., Ha, M.Y., Yoon, H.S. and Hong S.D., 2005, 'A Numerical Study on the Impinging Jet Flow Characteristics in the Presence of Applied Magnetic Fields,' Trans. of the KSME (B), Vol. 29, No. 5, pp. 537-544 https://doi.org/10.3795/KSME-B.2005.29.5.537
- Pacheco, P.S., 1997, Parallel programming with MPI, Morgan kaufmann Publishers Inc.