Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Punching Process Variables Influencing Micro Via-hole Quality of LTCC Green Sheet

LTCC 기판의 미세 비아홀 펀칭 중 공정 변수의 영향 평가

  • 백승욱 (서울대학교 기계항공공학부) ;
  • 임성한 (서울대학교 기계항공공학부) ;
  • 오수익 (서울대학교 기계항공공학부)
  • Published : 2005.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

LTCC(Low temperature co-fired ceramic) is being recognized as a significant packaging material of electrical devices for the advantages such as relatively low temperature being needed for process, low conductor resistance and high printing resolution. In the process of LTCC electrical devices, the punched via-hole quality is one of the most important factors on the performance of the device. However, its mechanism is very complicated and optimization of the process seems difficult. In this paper, to clarify the process, via-hole punching experiments were carried out and the punched holes were examined in terms of their burr formation. The effects of thickness of PET sheet, ceramic sheet and punch-to- die clearance on via-hole quality were also discussed. Optimum process conditions are proposed and a factor $\kappa$ is introduced to express effect of the process variables.

Keywords

References

  1. Y. Wang, 2002, Research of LTCC/Cu, Ag multilayer substrate in microelectronic packaging, Materials Science and Engineering B, Vol 94, pp. 48-53 https://doi.org/10.1016/S0921-5107(02)00073-9
  2. S. Y. Shin, S. H. Rhim, B. Y. Joo, S. I. Oh, 2004, Thickness effect of double layered sheet on burr formation during micro via-hole punching process,Trans. Materials Processing, Vol.3, pp. 65-71
  3. B. Y. Joo, S. H. Rhim, S. I. Oh, 2004, Design of twoway image acquisition system for $25{\mu}m$ tool alignment in the micro hole punching,Trans. Materials Processing, Vol 13
  4. B. Y. Joo, S. I. Oh, 2001, Development of micro punching system, Annals of the CIRP Vol.50, pp. 191-194 https://doi.org/10.1016/S0007-8506(07)62102-7
  5. F. Faura, A.Garcia, M. Estrems, 1998, Finite element analysis of optimum clearance in the blanking process, Journal of Materials Processing Technology, Vol. 80-81, pp. 121-125 https://doi.org/10.1016/S0924-0136(98)00181-2