References
- Qian, J. and Fatemi, A., 1996, 'Mixed Mode Fatigue Crack Growth: A Literature Survey,' Engineering Fracture Mechanics, Vol. 55, No. 6, pp. 969-990 https://doi.org/10.1016/S0013-7944(96)00071-9
- Song, S. H. and Lee, J. M., 'Fatigue Crack Propagation Behavior in STS304 under Mixed Mode Loading,' Transactions of the KSPE, Vol. 18, No.9, pp. 131-139, 2001
- Elber, W., 'The Significance of Fatigue Crack Closure in Damage Tolerance in Aircraft Structure,' ASTM STP. 486, pp. 230-242, 1971
- Song, S. H. and Kim, H., 'Analysis of Fatigue Crack Opening Behavior Using Direct Measuring Method,' Transactions of the KSME, Vol. 16, No. 8, pp. 1493-1502, 1992 https://doi.org/10.1002/hep.1840160627
- Richard, H. A. and Benitz, K., 'A Loading Device for the Criterion of Mixed Mode in Fracture Mechanics,' International Journal of Fracture, Vol. 22, pp. R55-R58, 1983 https://doi.org/10.1007/BF00942726
- ASTM E647, 'Standard Test Method for Measurement of Fatigue Crack Growth Rates,' Annual Book of ASTM Standards, Vol.03.01, pp. 565-601, 1995
- Lee, J. J. and Sharpe Jr., W. N., 'Closure Measurements on Short Fatigue Cracks,' ASTM STP 982, pp. 270-278, 1989.
- Richard, H. A., 'Some Theoretical and Experimental Aspects of Mixed Mode Fracture,' Advances Fracture Research, Vol. 5, pp. 3337-3344, 1986
- Tanaka, K., 'Fatigue Crack Propagation from a Crack Inclined to the Cyclic Tensile Axis,' Engineering Fracture Mechanics, Vol. 6, pp. 493-507, 1974 https://doi.org/10.1016/0013-7944(74)90007-1
- Heo, S. P., Yang, W. H. and Chung, K. H., 'A Study on the Fatigue Crack Growth of Cracks in Mechanical Joints,' Transactions of the KSAE, Vol. 10, No. 1, pp. 187-194, 2002
- Suresh, S., 'Fatigue of materials,' Cambridge University Press, pp.222-271, 1991
- Tong, J., Yates, J.R. and Brown, M.W., 'A Model For Sliding Mode Crack Closure Part II: Mixed Mode I and II Loading And Application,' Engineering Fracture Mechanics, Vol. 52, pp. 613-623, 1995 https://doi.org/10.1016/0013-7944(95)00045-W
- Newman Jr. J.C., Brot, A. and Matias, C., 'Crack-growth calculations in 7075-T7351 aluminum alloy under various load,' Engineering Fracture Mechanics, Vol. 71, pp. 2347-2363, 2004 https://doi.org/10.1016/j.engfracmech.2004.01.004
-
Dinda, S. and Kujawski, D., 'Correlation and prediction of fatigue crack growth for different R-ratios using
$K_{max}$ and${\Delta}\;K^+$ parameters,' Engineering Fracture Mechanics, Vol. 71, pp. 1779-1790, 2004 https://doi.org/10.1016/j.engfracmech.2003.06.001