DOI QR코드

DOI QR Code

알칼리 프리계 급결제를 사용한 강섬유 보강 숏크리트의 성능 평가

Performance of Steel Fiber Reinforced Shotcrete using Alkali Free Based Accelerator

  • 백철우 (유진종합개발(주) 기술연구소) ;
  • 박찬기 (건국대학교 사회환경시스템공학과) ;
  • 전언중 (건국대학교 대학원 지역건설환경공학과) ;
  • 원종필 (건국대학교 사회환경시스템공학과)
  • 발행 : 2004.05.30

초록

Modern underground and tunnel works that the wet type shotcrete is getting widely designed and applied in a large scale project. Further to its applications, the needs of improving the performance of the shotcrete, such as new and developed additives and accelerators fur increasing the performance of shotcrete, become the most important issue in the field. The main objective of this study evaluated to performance of steel fiber reinforced shotcrete using alkali free based accelerator for the durability and high quality of shotcrete. The major test variables are accelerator type and its dosage. One type silicate based accelerator and one type aluminate based accelerator and one type alkali free based accelerator were used. The dosage of accelerators is determined by the manufactures and laboratory test condition. Compressive strength test results showed that the dosage of silicate and aluminate based accelerators caused reduction of mechanical properties of shotcrete. Compressive strength of alkali free based accelerator is more stable than of silicate and aluminate based accelerators. Also, according to the compressive strength and flexural test results, it was found that steel fiber reinforced shotcrete used alkali free based accelerator could attain significant improvement in the mechanical and flexural performance.

키워드

참고문헌

  1. ACI Committee 506. 1995. Guide to shotcrete, ACI 506R-90.
  2. ACI Committee 506, 1995. State-of-the-art report on fiber reinforced shotcrete, ACI 506.1R-84.
  3. ACI Committee 506, 1995. Specification for materials, proportioning, and application of shotcrete, ACI 506.2-90.
  4. ACI Committee 506, 1995. Guide to certification of shotcrete nozzlemen, ACI 506.3R-91.
  5. ACI Committee 506, 1995. Guide for evalation of shotcrete, ACI 506.4R-94.
  6. ASTM C 1018, 1989. Standard test method for flexural toughness and first-crack strength of fiber-reinforced concrete.
  7. ASTM C 1102-88, Standard test method for time of setting of portland-cement pastes containing accelerating admixtures for shotcrete by the use of gillmore needle.
  8. Baek, Chul Woo, 2003. Mechanical and physical properties of structural polymer fiber reinforced shotcrete, MS thesis. Konkuk Univ., Seoul, Korea.
  9. Paglia. C., Wombacher. F., and Bohni. H., 2001. The influence of alkali-free and alkaline shotcrete accelerators within cement systems I. Characterization of the setting behavior, Cement and Concrete Research, Vol. 31. pp.913-918. https://doi.org/10.1016/S0008-8846(01)00509-9
  10. Morgan. D., Heere. R., McAskil. N. and Chan. C., 1999. Comparative evaluation of system ductility of mesh and fibre reinforced shotcretes. Shotcrete for Underground Support VIII, April. pp.1-23.
  11. Papworth, F., 2002. Design guidelines for the use of fiber-reinforced shotcrete in ground support, Shotcrete Magazine, Summer, pp.16-21.
  12. JCI-SF4, 1983. Method of test for flexural strength and flexural toughness of fiber reinforced concrete.
  13. Jeon, Eon Jung, 2003. Performance of steel fiber reinforced shotcrete with alkali free accelerator, MS thesis, Konkuk Univ., Seoul, Korea.
  14. Kim, Jae Dong, and Kim, Deog Young, 2000, A study on the flexural toughness evaluation method of steel fiber reinforced shotcrete, Tunnel and Underground, Vol. 10, pp. 196-210
  15. KS L 5105, Testing method for compressive strength of hydraulic cement mortar.
  16. KS L 5108, Testing method for time of setting of hydraulic cement.
  17. KS F 2405, Testing mothod for compressive strength of molded concrete cylinders.
  18. Lim, Dong Hee, 2002. The opimum geometry factor of high-performance structural synthetic fibers, MS thesis, Konkuk Univ., Seoul, Korea.
  19. Luiz Roberto Prudencio Jr, 1998. Accelerating admixtures for shotcrete, Cement and Concrete Composites, Vol. 20, pp.213-219. https://doi.org/10.1016/S0958-9465(98)80007-3
  20. Lee, Yang Kyoo and Kwon, In Hwan, 2001. Experimental study on reduce of rebound amounts in shotcrete works, Journal of KSEC, Vol. 21, No. 4-D, pp.499- 508