References
- AASHTO (1994), LRFD bridge design specifications, 1st ed., American Association of State Highway and Transportation Officials, Washington D.C.
- AASHTO (1998), LRFD bridge design specifications, 2nd ed., American Association of State Highway and Transportation Officials, Washington D.C.
- ACI (1999), Building code requirements for structural concrete (318-99) and commentary (318R-99), American Concrete Institute, Detroit
- AISC (1994), Load and resistance factor design specification for structural steel buildings, 2nd ed., American Institute of Steel Construction, Inc., Chicago, Illinois
- Allen, D. E. (1975), 'Limit states design-probabilistic study', Can. J. Civ. Engrg., Vol. 2, pp.36-49 https://doi.org/10.1139/l75-004
- API (1993), Recommended practice for planning, designing and constructing fixed offshore platforms-load and resistance factor design, American Petroleum Institute, Washington D.C.
- Barker, R. M., Duncan, J. M., Rojiani, K. B., Ooi, P. S. K., Tan, C. K., and Kim, S. G. (1991), Manuals for the design of bridge foundations, Transportation Research Board, NCHRP report 343
- Becker, D. E. (1996), 'Eighteenth canadian geotechnical colloquium: limit states design for foundations. part II. development for the national building code of Canada', Can. Geotech. J., Vol.33, pp.984-1007 https://doi.org/10.1139/t96-125
- Cherubini, C., Giasi, C. I., and Rethati, L. (1993), 'The coefficients of variation of some geotechnical parameters', Probabilistic methods in geotechnical engineering, Edited by K. S. Li and S. -C R. Lo., A. A. Balkema, Rotterdam, pp.179-184
- Cornell, C. A. (1969), 'Structural safety specifications based on second-moment reliability', Symp. Int. Assn. Brid. and Struct. Engrg., London
- DGI (1985), Code of practice for foundation engineering, Danish Geotechnical Institute, Copenhagen, Denmark
- ECS (1994), Eurocode 7: geotechnical design-part I: general rules, European Committee for Standardization, Central Secretariat, Brussels
- ECS (1995), Eurocode 1: basis of design and actions on structures-part I: basis of design, European Committee for Standardization, Central Secretariat, Brussels
- Ellingwood, B. R. and Tekie, P. B. (1999), 'Wind load statistics for probability-based structural design', J. Struct. Engrg., ASCE, Vol.125, No.4, pp.453-463 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:4(453)
- Ellingwood, B., Galambos, T. V., MacGregor, J. G., and Cornell C. A. (1980), Development of a probability based load criterion for American National Standard A58 - building code requirements for minimum design loads in buildings and other structures, National Bureau of Standards, Washington, D.C.
- Goble, G. (1999), Geotechnical related development and implementation of load and resistance factor design (LRFD) methods, Transportation Research Board, NCHRP synthesis 276
- Haldar, A. and Mahadevan, S. (2000), Probability, reliability, and statistical methods in engineering design, John Wiley and Sons, Inc., New York
- Hettler, A. (1993), 'Probabilistic approach and partial safety factors for driven piles', Proceedings of the International Symposium on Limit State Design in Geotechnical Engineering, Copenhagen, May 26-28, Vol.1., pp.217-222
- Kay, J. N. (1993), 'Probabilistic design of foundations and earth structures', Probabilistic methods in geotechnical engineering, Edited by K. S. Li and S. -C. R. Lo., A. A. Balkema, Rotterdam, pp.49-62
- Kulhawy, F. H. (1992), 'On evaluation of static soil properties', American Society of Civil Engineers Specialty Symposium on Stability and Performance of Slopes and Embankments-Il, New York, pp.95-115
- Kulhawy, F. H., Trautmann, C. H., Beech, J. F., O'Rourke, T. D., and McGuire, W. (1983), Transmission line structure foundations for uplift-compression loading, EPRI report, EL-2870, Electric Power Research Institute
- Lind, N. C. (1971), 'Consistent partial safety factors', J. Struct. Engrg. Div., ASCE, Vol.97, ST6, pp.1651-1670
- MacGregor, J. G. (1976), 'Safety and limit states design for reinforced concrete', Can. J. Civ. Engrg., Vol.3, pp.484-513 https://doi.org/10.1139/l76-055
- Manoliu, I., and Marcu, A. (1993), '25 years of utilization of the limit state concept in the Romanian Code for geotechnical design', Proceedings of the International Symposium on Limit State Design in Geotechnical Engineering, Copenhagen, May 26-28, VoI.2., pp.533-542
- Matsumoto, T., Kusakabe, O., Suzuki, M., and Shogaki, T. (1993), 'Soil parameter selection for serviceability limit design of a pile foundation in a soft rock', Proceedings of the International Symposium on Limit State Design in Geotechnical Engineering, Copenhagen, May 26-28, Vol.1., pp.141-151
- Meyerhof, G. G. (1993), 'Development of geotechnical limit state design', Proceedings of the International Symposium on Limit State Design in Geotechnical Engineering, Copenhagen, May 26-28, Vol.1., pp.1-12
- Meyerhof, G. G. (1995), 'Development of geotechnical limit state design', Can. Geotech. J. Vol.32, pp.128-136 https://doi.org/10.1139/t95-010
- MOT (1992), Ontario highway bridge design code, Ministry of Transportation Ontario, Downsview
- Nowak, A. S. (1994), 'Load model for bridge design code', Can. J. Civ. Engrg., Vol.21, pp.36-49 https://doi.org/10.1139/l94-004
- NRC (1995), National building code of Canada, National Research Council of Canada, Ottawa
- Okahara, M., Kimura, Y., Ochiai, H. and Matsui, K. (1993), 'Statistical characteristics of bearing capacity of single pile', Proceedings ofthe International Symposium on Limit State Design in Geotechnical Engineering, Copenhagen, May 26-28, Vol.1., pp.223-232
- Phoon, K. K., Kulhawy, F. H., and Grigoriu, M. D. (1993), 'Observations on reliability-based design of foundation for electrical transmission line structures', Proceedings of the International Symposium on Limit State Design in Geotechnical Engineering, Copenhagen, May 26-28, Vol.2., pp.351-362
- Skernpton, A. W., (1951), 'The bearing capacity of clays', Building Research Congress, London, England, Vol.1, pp.180-189