산업공학 (IE interfaces)

  • 제17권3호
  • /
  • Pages.282-293
  • /
  • 2004
  • /
  • 1225-0996(pISSN)
  • /
  • 2234-6465(eISSN)
대한산업공학회 (Korean Institute of Industrial Engineers)
권호 표지

작업시간과 육체적인 작업부하를 고려한 혼합모델 조립공정의 라인밸런싱

Line Balancing for the Mixed Model Assembly Line Considering Processing Time and Physical Workloads

  • Moon, Sung-Min (Department of Industrial Engineering, Hanyang University) ;
  • Kwon, Keun-Seob (Department of Industrial Engineering, Hanyang University) ;
  • Choi, Gyung-Hyun (Department of Industrial Engineering, Hanyang University)
  • 투고 : 2004.02.24
  • 심사 : 2004.04.26
  • 발행 : 2004.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Line Balancing is the problem to assign tasks to stations while satisfying some managerial viewpoints. Most researches about the Mixed-Model Line Balancing problems are focused on the minimizing the total processing time or the number of workstations. Independently, some research reports consider the balance issues of the physical workloads on the assembly line. In this paper, we are presenting a new mathematical model to accomplish the line balance considering both the processing time and the workloads at the same time. To this, end, we propose an zero-one integer program problem, and we use the Chebyshev Goal Programming approach as the solution method. Some computational test runs are performed to compare the pay-offs between the processing time and the workloads. And, the test results show us that the reliable balanced work schedules can be obtained through the proposed model.

키워드

참고문헌

  1. Adams, N.(1988), Occupational stress and workplace stresses: identifying and ameliorating the stresses, Ergonomics International, 88, 514-516
  2. Ayoub, M. M.,Selan,J. L. and Liles, D. H.(1983), An ergonomics approach for the design of Manual material handling tasks, Human Factors, 25, 57-516
  3. Berger, I., Bourjolly, J. -M and Baporte, G.(1992), Branch-and-bound algorithms for the multi-product assembly line balancing problem, European Journal of Operational Research, 58(2), 215-222
  4. Bielski, J., Wolowicki, J.,and Zeyland, A.(1976), The ergonomic evaluation of work stress in the furniture industry, Applied Ergonomics, 7(2),89-91
  5. Carnahan, B. J., Norman, B. A. and Redfern, M. S.(2001), Incorporation physical demand criteria into assembly line balancing, IIE Transactions, 33, 875-887
  6. Chaffin, D.(1975), Ergonomics guide for the assessment of human static strength, American Industrial Hygiene Association Journal, 36, 505-510
  7. Chen, J, -G., Jung, H. S., and Peacock, B. J.(1994), A fuzzy sets modelling approach for ergonomic workload stress analysis, International Journal of Industrial Ergonomics, 13(3), 189-216
  8. Erel, E. and Gokcen, H.(1999), Shortest-route formulation of mixed-model assembly line balancing problem, European Journal of Operational Research, 116, 194-204
  9. Erelbacher, S., Jordan, W. C. and van der Veen, D. J.(1991), Assembly line balancing accounting for variable processing times, Technical Report, General Motors Research Laboratories , Warren, MI
  10. Gomer, F. C, Siverstein, L. D., Berg, W. K., and Lassiter, D. L.(1987), Changes in electromyographic activity associated with occupational stress and poor performance in the workplaces, Human Factors, 29(2), 131-143.
  11. Gokcen, H. and Erel, E.(1997), Agoal programming aproach to mixed-model assembly line balancing problem, International Journal of Production Economics, 48, 177-185
  12. Grand Jean, E.(1985), Fitting the Task to the Man: Ergonomic Approach, Taylor and Francis, London
  13. Hagberg, M., Silverstein, B., Wells R., Smith M. J., Hendrick, H. W., Carayon, P. and Peresse, M.(1995), Work Related Musculoskeletal Disorders (WRMSDs): A Reference Book for Prevention, Taylor and Francis, New York
  14. Hancock, P. A.(1989b), The effect of performance failure and task demand on the perception of mental workload, Applied Ergonomics, 20(3), 197-205
  15. Hsu, L. Y(1992), Design ofan assembly line with stochastic task times, Master of Science thesis, Sloan School of Management, Massachusetts Institute of Technology, Cambridge, MA
  16. Jung, H. S. and Jung, Hyung-Shik(2001), Establishment of overall workload assessment technique for various tasks and workplaces, International Journal of Industrial Ergonomics, 28, 341-353
  17. Kosiak, M., Aurelius, J., and Herfield, W.(1971), Backache in industry, Journal of Occupational Medicine, 8, 51-58
  18. Luczak, H., Ge, S.(1989), Fuzzy modelling of relations between physical weight and perceived heaviness: the effect of size-weight illusion in industrial liftingtasks, Ergonomics, 32, 823-837
  19. NIOSH(1981), Work practices guide for manual lifting, Technical Report, US Department of Health and Human Services
  20. Oborne, D.J.(1976), Examples of the use of rating scales in ergonomics research, Applied Ergonomics. 7(4),201-204
  21. Roberts, S. D. and Villa, C. D.(1970), On a multi-product assembly line balancing problem, AIIE Transactions, 2(4),361-365
  22. Rowe, M.1.(1971), Low back pain: updated position, Journal of Occupational Medicine, 13, 476-478
  23. Sanders, M. S. and Mccormick, E.J.(1992), Human factors in engineering and design: 7th Edition, McGraw-Hill Inc.,New York
  24. Scholl, A. and Klein, R.(2000b), The task times and precedence graph information for the test problems can be downloaded from: http://www.tudarmstade.de/bwI3/for Sch/projekte/alb/
  25. Matanachai, S. and Yano, C. A.(2001), Balancing mixed-model assembly lines to reduce work overload, IIE Transactions. 33, 29-42
  26. Thomopoulos, N.T.(1967), Line balancing-sequencing for mixed-model assembly, Management Science, 14(2), B59-B75
  27. Thomopoulos, N.T.(1970), Mixed model line balancing with smoothed station assignments, Management Science, 16(9), 593-603
  28. Wilson,J. R., Corlett, E.N.. (Eds.)(1990), Evaluation of Human Work, Taylor and Francis, Bristol, PA
  29. Zimmer, A. C.(1984), A model for the interpretation of verbal predictions, International Journal of Man-Machine Studies, 20, 121-134