Combustion Characteristics of Dimethyl Ether (DME) and Diesel Fuel Using a Common-rail Fuel Injection System

커먼레일 분사장치를 이용한 Dimethyl Ether와 디젤연료의 연소특성

  • 최욱 (한국과학기술원 기계공학과) ;
  • 이주광 (한국과학기술원 기계공학과) ;
  • 배충식 (한국과학기술원 기계공학과)
  • Published : 2004.11.01

Abstract

The combustion and emission characteristics of a direct injection CI engine fuelled with DME(Dimethyl Ether) and diesel fuel were compared at idle engine speed(800 rpm) with various injection parameters. An optical single cylinder diesel engine equipped with a common-rail fuel injection system was constructed to investigate combustion processes of DME and diesel fuel. The combustion images were recorded with a high-speed video camera system. The results demonstrated that the DME-fuelled engine was superior to the conventional diesel engine in terms of engine performance and emissions. The optimal injection timing of DME was located around IDC(Top Dead Center), which was roughly same as that of diesel fuel. As the injection timing was advanced much earlier than TDC, NOx (Nitric Oxides) level increased considerably. NOx emission of DME was equal or a little higher than that for diesel fuel at the same injection pressure and timing because of higher evaporation characteristics of DME. Throughout all experimental conditions, DME did not produce any measurable smoke level.

Keywords

References

  1. R. Verbeek and J. Van der Weide, 'GlobalAssessment of Dimethyl Ether Comparisonwith Other Fuels,' SAE 971607, 1997
  2. S. Kajitani, 'Fundamental Research of DMEDiesel Engine Operated with a Common RailInjection System,' 14th ISAF, 2002-VT-13, 2002
  3. H. Teng, J. C. McCandless and J. B. Schneyer, 'Compression Ignition Delay (Physica1+Chemical) of Dimethyl Ether,' SAE 2003-01-0759, 2003
  4. Z. Lonbao, W. Hewu, J. Deming and H.Zuohua, 'Study of Performance and Combus-tion Characteristics of a DME-Fuelled Light-duty Direct-injection Diesel Engine,' SAE1999-01-3669, 1999
  5. S. Kajitani, Z. L. Chen, M. Kono and K. T.Rhee, 'Engine Performance and Exhaust Cha-racteristics of Direct Diesel Engine Operatedwith DME,' SAE 972973, 1997
  6. Y. Sato, A. Noda, T. Sakamoto and Y. Goto,'Performance and Emission of a DI DieselEngine Operated on Dimethyl Ether ApplyingEGR with Supercharging,' SAE 2000-01-1809, 2000
  7. S. H. Nam, Y. K. Kim and Y. J. Lee, 'Effect of Cooled-EGR on the Emission Characteristics of DI DME Fuelled Engine,' pp. 203-209, 2003 KSAE Sping Conference, 2003