Nuclear Engineering and Technology

  • 제36권3호
  • /
  • Pages.248-262
  • /
  • 2004
  • /
  • 1738-5733(pISSN)
  • /
  • 2234-358X(eISSN)
한국원자력학회 (Korean Nuclear Society)
권호 표지

Assessment of RANS Models for 3-D Flow Analysis of SMART

  • 발행 : 2004.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Turbulence models are separately assessed for a three dimensional thermal-hydraulic analysis of the integral reactor SMART. Seven models (mixing length, k-l, standard $k-{\epsilon},\;k-{\epsilon}-f{\mu},\;k-{\epsilon}-v2$, RRSM, and ERRSM) are investigated for flat plate channel flow, rotating channel flow, and square sectioned U-bend duct flow. The results of these models are compared to the DNS data and experiment data. The results are assessed in terms of many aspects such as economical efficiency, accuracy, theorization, and applicability. The standard $k-{\epsilon}$ model (high Reynolds model), the $k-{\epsilon}-v2$ model, and the ERRSM (low Reynolds models) are selected from the assessment results. The standard $k-{\epsilon}$ model using small grid numbers predicts the channel flow with higher accuracy in comparison with the other eddy viscosity models in the logarithmic layer. The elliptic-relaxation type models, $k-{\epsilon}-v2$, and ERRSM have the advantage of application to complex geometries and show good prediction for near wall flows.

키워드

참고문헌

  1. KAERI/TR-2142/2002, Basic Design Report of SMART, KAERI,(2002)
  2. KAERI/TR-2540/2003, Development of Inhomogeneous ${\kappa}-{\varepsilon}-v2$ Turbulence model for 3D Flow Analysis of SMART-P, KAERI,(2003)
  3. E. R. Van Driest, 'On Turbulent Flow Near Wall,' Journal of the Aeronautical Sciences, Vol.23, p.1007(1956)
  4. M. P. Escudier, 'The Distribution of Mixing Length in Turbulent Flows Near Wall,' Imperical College, Heat Transfer Section Report SF/R/2(1966)
  5. M. Wolfshtein, 'Convection Processes in Turbulent Impinging Jets,' Imperial College, Heat Transfer Section Report SF/R/2(1967)
  6. B. E. Launder, and D. B. Spalding, 'The Numerical Computation of Turbulent Flows,' Comput. Methods Appl. Mech. Eng., Vo1.3, pp.269-289(1974) https://doi.org/10.1016/0045-7825(74)90029-2
  7. B. E. Launder and B. I. Sharma, 'Application of the Energy Dissipation Model of Turbulence to the Calculation of Flow Near a Spinning Disc,' Letters in Heat and Mass Transfer, Vol. 1, No. 2, pp. 131-138(1974) https://doi.org/10.1016/0094-4548(74)90150-7
  8. P. A. Durbin, 'Near wall turbulence closure modeling without damping function,' Theoret. Comput. Fluid Dyn. Vol.3, pp.1-13(1991) https://doi.org/10.1007/BF00271513
  9. C. G. Speziale, S. Sarkar, & T.B. Gatski, 'Modeling the Pressure-Strain Correlation of Turbulence: an Invariant dynamical systems approach,' J. Fluid Mech. Vol. 227, pp. 245-272(1991) https://doi.org/10.1017/S0022112091000101
  10. P. A. Durbin, 'A Reynolds stress model for near-wall turbulence,' Journal of Fluid Mechanics, Vol. 249, pp. 465-498(1993) https://doi.org/10.1017/S0022112093001259
  11. R. D. Moser, J. Kim, and N. N. Mansour, 'Direct numerical simulation of turbulent channel flow up to $Re_{\tau}$,' Phys. Fluids, Vol.11, pp.943-948(1999) https://doi.org/10.1063/1.869966
  12. R. Kristoffersen and H.I. Andersson, 'Direct simulations of low-Reynolds-number turbulent flow in a rotating channel,' J. Fluid Mech. 177, pp.133-166(1993)
  13. K. H. Chun, Y. D. Choi and J. K. Shin, 'Developing Turbulent Heat Transfer in a 360 Bend of Square cross section,' Heat Transfer-Asian Research, 28(2), p.77(1999)
  14. S. M. Chang, J. A. C. Humphrey and A. Modavi, 'Turbulent flow in a strongly curved U-bend and downstream tangent of square cross sections,' PCH Phys. Chem. Hydrodynamics, 4, p.243(1983)
  15. G. H. Lee, Y. D. Choi, and S. K. Cho, 'Measurement of turbulent flows in a square sectioned 270 degree bend,' Proceedings of the KSME 2000 Fall Annual Meeting B. pp.467-472(2000)