참고문헌
- Akbas, B., Shen, J. and Hao, H. (2001),"Energy approach in performance-based seismic design of steel moment resisting frames for basic safety objective", The Structural Design of Tall Buildings, 10, 193-217. https://doi.org/10.1002/tal.172
- ATC (1996),"Seismic evaluation and retrofit of concrete buildings", ATC-40, Applied Technology Council, Redwood City, California.
- Black, C., Makris, N. and Aiken, I. (2002),"Component testing, stability analysis and characterization of buckling restrained braces", Final Report to Nippon Steel Corporation, Japan.
- Chou, C.C., and Uang, C.M. (2002),"Evaluation of site-specific energy demand for building structures", Seventh U.S. National Conference on Earthquake Engineering, Boston, Massachusetts.
- Estes, K.R. and Anderson, J.C. (2002),"Hysteretic energy demands in multistory buildings", Seventh U.S. National Conference on Earthquake Engineering, Boston, Massachusetts.
- Huang, Y.H., Wada, A., Sugihara, H., Narikawa, M., Takeuchi, T., and Iwata, M. (2000),"Seismic performance of moment resistant steel frame with hysteretic damper", Proc. of the Third Int. Conf. STESSA, Montreal, Canada.
- International code council (2000), 2000 International building code, Int. Conf. Building Officials.
- Iwata, M., Kato, T. and Wada, A. (2000),"Buckling-restrained braces as hysteretic dampers", Proc. of Behavior of Steel Structures in Seismic Areas, Balkema, Rotterdam.
- Leelataviwat, S., Goel, S.C. and Stojadinovic, B. (2002),"Energy-based seismic design of structures using yield mechanism and target drift", J. Struct. Eng., 128(8), 1046-1054. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1046)
- Leger, P. and Dussault, S. (1992),"Seismic-energy dissipation in MDOF structures", J. Struct. Eng., 118(5), 1251-1269. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:5(1251)
- Riddell, R. and Garcia, J.E. (2001),"Hysteretic energy spectrum and damage control", Earthq. Eng. Struct. Dyn., 30(12), 1791-1816. https://doi.org/10.1002/eqe.93
- Saeki, E., Maeda, Y., Nakamura, H., Midorikawa, M., and Wada, A. (1995),"Experimental study on practicalscale unbonded braces", J. Struct. Construct. Eng., 476, 149-158.
- SEAOC (2001),"Recommend provisions for buckling-restrained braced frames", in draft form, Structural Engineers Association of California, Sacramento, CA.
- Somerville, P., Smith, H., Puriyamurthala, S. and Sun, J. (1997),"Development of ground motion time histories for phase 2 of the FEMA/SAC steel project", SAC Joint Venture, SAC/BD-97/04.
- Tremblay, R., Degrange, D. and Blouin, J. (1999),"Seismic rehabilitation of a four-story building with a stiffened bracing system", Proc. of the 8th Canadian Conf. on Earthquake Engineering, Vancouver, 549-554.
- Tsai, K.C. and Li, J.W. (1997),"DRAIN2D+, A general purpose computer program for static and dynamic analyses of inelastic 2D structures supplemented with a graphic processor", Report No. CEER/R86-07, National Taiwan University, Taipei, Taiwan.
- Uang, C.M. and Bertero, V.V. (1988),"Use of energy as a design criterion in earthquake-resistant design", Report No. UCB/EERC-88/18, Earthquake Engineering Research Center, University of California at Berkeley.
- Vanmarcke, E.H. and Gasparini, D.A. (1976),"A program for artificial motion generation, user's manual and documentation", Department of Civil Engineering, Massachusetts Institute of Technology.
- Yamaguchi, M., et al., (2000),"Earthquake resistant performance of moment resistant steel frames with damper", Proc. of Behavior of Steel Structures in Seismic Areas, Balkema, Rotterdam.
피인용 문헌
- Seismic design of buckling-restrained braced frames based on a modified energy-balance concept vol.33, pp.10, 2006, https://doi.org/10.1139/l06-068
- Seismic design, nonlinear analysis, and performance evaluation of recentering buckling-restrained braced frames (BRBFs) vol.14, pp.4, 2014, https://doi.org/10.1007/s13296-014-1201-3
- Energy-based seismic design of buckling-restrained braced frames using hysteretic energy spectrum vol.28, pp.2, 2006, https://doi.org/10.1016/j.engstruct.2005.08.008
- Derivation of energy-based base shear force coefficient considering hysteretic behavior and P-delta effects vol.17, pp.1, 2018, https://doi.org/10.1007/s11803-018-0431-3
- Structural behavior of conventional and buckling restrained braced frames subjected to near-field ground motions vol.7, pp.4, 2014, https://doi.org/10.12989/eas.2014.7.4.553
- An equivalent SDOF system model for estimating the response of R/C building structures with proportional hysteretic dampers subjected to earthquake motions vol.40, pp.5, 2011, https://doi.org/10.1002/eqe.1049
- Energy-based design method for seismic retrofitting with passive energy dissipation systems vol.46, 2013, https://doi.org/10.1016/j.engstruct.2012.07.011
- Constant Ductility Energy Factors for the Near-Fault Pulse-Like Ground Motions vol.21, pp.2, 2017, https://doi.org/10.1080/13632469.2016.1157529
- Earthquake response of ten-story story-drift-controlled reinforced concrete frames with hysteretic dampers vol.32, pp.6, 2010, https://doi.org/10.1016/j.engstruct.2010.02.025
- Evaluation of seismic energy demand and its application on design of buckling-restrained braced frames vol.31, pp.1, 2009, https://doi.org/10.12989/sem.2009.31.1.093
- Seismic behavior factors of buckling-restrained braced frames vol.33, pp.3, 2004, https://doi.org/10.12989/sem.2009.33.3.261
- Cyclic test of buckling restrained braces composed of square steel rods and steel tube vol.13, pp.5, 2004, https://doi.org/10.12989/scs.2012.13.5.423
- Energy-Based Seismic Design Method for EBFs Based on Hysteretic Energy Spectra and Accumulated Ductility Ratio Spectra vol.2019, pp.None, 2004, https://doi.org/10.1155/2019/3180596
- Design of buckling restrained braces with composite technique vol.35, pp.5, 2020, https://doi.org/10.12989/scs.2020.35.5.687
- Performance of innovative composite buckling-restrained fuse for concentrically braced frames under cyclic loading vol.36, pp.2, 2004, https://doi.org/10.12989/scs.2020.36.2.163
- Seismic Retrofit of an Existing Reinforced Concrete Building with Buckling-restrained Braces vol.15, pp.1, 2021, https://doi.org/10.2174/1874149502115010203
- Experimental study on steel hysteretic column dampers for seismic retrofit of structures vol.40, pp.4, 2004, https://doi.org/10.12989/scs.2021.40.4.495
- Improving the seismic performance of reinforced concrete frames using an innovative metallic-shear damper vol.28, pp.3, 2021, https://doi.org/10.12989/cac.2021.28.3.275