DOI QR코드

DOI QR Code

Ultimate section capacity of steel thin-walled I-section beam-columns

  • 투고 : 2003.12.31
  • 심사 : 2004.10.06
  • 발행 : 2004.10.25

초록

A numerical model based on the finite element technique is adopted to investigate the behavior and strength of thin-walled I-section beam-columns. The model considers both the material and geometric nonlinearities. The model results were first verified against some of the currently available experimental results. A parametric study was then performed using the numerical model and interaction diagrams for the investigated beam-columns have been presented. The effects of the web depth-to-thickness ratio, flange outstand-to-thickness ratio and bending moment-to-normal force ratio on the ultimate strength of thin-walled I-section beam-columns were scrutinized. The interaction equations adopted for beam columns design by the NAS (North American Specifications for the design of cold formed steel structural members) have been critically reviewed. An equation for the buckling coefficient which considers the interaction between local buckling of the flange and the web of a thin-walled I-section beam-column has been proposed.

키워드

참고문헌

  1. Al-Bermani, F., Kitipornchai, S. and Chin, S. (1994),"Stability of cold-formed members", J. Eng. Struct., 16(5), 386-391. https://doi.org/10.1016/0141-0296(94)90032-9
  2. AISI - American Iron and Steel Institute (2001),"North American specifications for the design of cold-formed steel structural members", Washington, USA.
  3. AISI - American Iron and Steel Institute (1996),"Specifications for the design of cold-formed steel structural members", Washington, USA.
  4. AISI - American Iron and Steel Institute (1999),"Specifications for the design of cold-formed steel structural members (Suppl. 1)", Washington, USA.
  5. Basu, P.K. and Akhtar, M.N. (1990),"Interactive and local buckling of thin-walled members", Thin-Walled Struct., 12, 335-352.
  6. CSA- Canadian Standards Association (1994),"Cold-formed steel structural members. structures (design)", S136-94. Toronto, Ontario, Canada.
  7. Chen, S.J. and Wang, W.C. (1999),"Moment amplification factor for P- $\delta$fect of steel beam-columns", J. Struct. Eng., ASCE, 125(2), 219-223. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:2(219)
  8. Chick, C.G. and Rasmussen, K.J.R. (1999a),"Thin-walled beam columns, I: Sequential loading and moment gradient tests", J. Struct. Eng., ASCE, 125(11), 1275-1266.
  9. Chick, C.G. and Rasmussen, K.J.R. (1999b),"Thin-walled beam columns, II: Proportional loading tests", J. Struct. Eng., ASCE, 125(11), 1267-1276. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:11(1267)
  10. Dawe, John L. and Grondin, Gilbert Y. (1985),"Inelastic buckling of steel plates", J. Struct. Eng., ASCE, 111(1), 95-107. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:1(95)
  11. El-Serwi, A.A. (1998a),"Web buckling of H-shaped cross-sections subjected to axial force and bending moment about major axis", Civil Engineering Research Magazine, Al-Azhar University, Cairo, Egypt, 22(2).
  12. El-Serwi, A.A. (1998b),"Ultimate capacity of thin-walled H-shaped cross-sections subjected to axial force and major axis bending moment", PSERJ, Faculty of Engineering, Suez Canal University, Port Said, Egypt, 4(2).
  13. Hasham, A.S. and Rasmussen, K.J.R. (1998),"Section capacity of thin-walled I-section beam-columns", J. Struct. Eng., ASCE, 124(4), 351-359. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:4(351)
  14. Korashy, M.M. (2002),"Load capacity of thin-walled I-section beam-columns", MSc., Structural Engineering Department, Faculty of Engineering, Ain shams University, Cairo, Egypt.
  15. Lau, S.C.W. and Hancock, G.J. (1989),"Inelastic buckling analyses of beams, columns and plates using the spline finite strip method", Thin-Walled Struct., 7, 213-238. https://doi.org/10.1016/0263-8231(89)90026-8
  16. March, Cedric (1988),"Design method for buckling failure of plate elements", J. Struct. Eng., ASCE, 124(7), 850-853.
  17. Ren, W. and Zeng, Q. (1997),"Interactive buckling behavior and ultimate load of I-section steel columns", J. Struct. Eng., ASCE, 123(9), 1210-1217. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:9(1210)
  18. Shen, Z. and Zhang, Q. (1992),"Nonlinear stability analysis of steel members by finite element method", J. Eng. Mech., ASCE, 118(3), 445-461. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:3(445)
  19. Sohal, I.S. and Syed, N.A. (1992),"Inelastic amplification factor for design of steel beam-columns", J. Struct. Eng., ASCE, 118(7), 1822-1839. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:7(1822)
  20. Sputo, Thomas, (1993),"History of steel beam-column design", J. Struct. Eng., ASCE, 119(2), 547-557. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:2(547)
  21. Von Karaman, T., Sechler, E.E. and Donnell, L.H., (1932), "The strength of thin plates in compression", Transactions, ASME, 54.
  22. Winter, G. (1974),"Strength of thin-steel compression flanges", Cornell University, Eng. Exp. Stn., Reprint No. 32.
  23. Yu, W.W. (2000), Cold-formed Steel Design, 3rd Edition, John Wiley & Sons Inc., New York, USA.

피인용 문헌

  1. Structural behaviour of stainless steel stub column under axial compression: a FE study pp.2093-6311, 2018, https://doi.org/10.1007/s13296-018-0083-1