DOI QR코드

DOI QR Code

A simplified method to predict sway of rigid multi-storey steel frames

  • Ashraf, M. (Department of Civil and Environmental Engineering, Imperial College London) ;
  • Nethercot, D.A. (Department of Civil and Environmental Engineering, Imperial College London) ;
  • Ahmed, B. (Department of Civil Engineering, Bangladesh University of Engineering and Technology)
  • 투고 : 2004.04.09
  • 심사 : 2004.07.19
  • 발행 : 2004.08.25

초록

The lateral sway of a multi-storey steel frame should be limited so as to ensure the comfort of the occupants and for the protection of mechanical and architectural systems. This paper investigates the applicability of Schueller's equation for predicting sway of rigid steel frames, and proposes a number of modifications to the equation so that it can produce results that are almost identical to those given by accurate Finite Element (FE) analysis. The behaviour of irregular steel frames has also been studied and proposals are made so that Schueller's Equation can also be used to predict sway of such frames.

키워드

참고문헌

  1. Ahmed, B., (1996),"Numerical modeling of connections in composite frames", Ph. D. Thesis, Department of Civil Engineering, University of Nottingham, UK.
  2. Ahsan, R. (1997),"Semi-rigid joint action in sway steel frames", M. Sc. Thesis, Department of Civil Engineering, Bangladesh University of Engineering and Technology, Dhaka.
  3. Anderson, D. and Benterkia, Z. (1991),"Analysis of semi-rigid steel frames and criteria for their design", J. Construct. Steel Res., 18(3), 227-237. https://doi.org/10.1016/0143-974X(91)90027-X
  4. ANSYS (1998),"Basic analysis procedure guide", Elements Reference Vol. 1 & 2, Commands Reference Vol. 1 & 2 and Structural Analysis Guide, Version 5.4, ANSYS, Inc., Global Headquarters, Southpointe, 275 Technology Drive, Canonsburg, PA 15317.
  5. Ashraf, M. (2001),"Sway estimation of semi-rigid steel frames", M. Sc. Thesis, Department of Civil Engineering, Bangladesh University of Engineering and Technology, Dhaka 1000, Bangladesh.
  6. Ashraf, M., Nethercot, D.A. and Ahmed, B. (2004),"Sway of semi-rigid steel frames, Part 2: Irregular frames", Accepted for publication in the Journal of Engineering Structures.
  7. Bangladesh National Building Code (1993),"Housing and building research institute and bangladesh standards and testing institution", 1st Edition, Dhaka.
  8. Fisher, J.M. and West, M.A. (1990),"Serviceability design considerations for low rise buildings", American Institute of Steel Construction (AISC) Steel Design Guide Series, No. 3, American Institute of Steel Construction (AISC), Chicago, Illinois.
  9. Kishi, N., Chen, W.F., Goto, Y. and Hasan, R. (1996),"Behavior of tall buildings with mixed use of rigid and semi-rigid connections", Comput. Struct., 61(6), 1193-1206. https://doi.org/10.1016/0045-7949(96)00052-1
  10. Lui, E.M. and Chen, W.F. (1988),"Behaviour of braced and unbraced semi-rigid frames", Int. J. Solids Struct., 24, 893-913. https://doi.org/10.1016/0020-7683(88)90040-6
  11. Schueller, W. (1977), High-Rise Building Structures, John Wiley and Sons.
  12. Task Committee on Drift Control of Steel Building Structures (1988),"Wind drift design of steel-framed buildings: State of the art report", J. Struct. Eng., ASCE, 114(9), 2085-2108. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:9(2085)
  13. Wang, C.K. (1983), Statically Intermediate Structures, McGraw Hill, New York.

피인용 문헌

  1. Sway of semi-rigid steel frames, part 2: Irregular frames vol.29, pp.8, 2007, https://doi.org/10.1016/j.engstruct.2006.10.005
  2. Limiting the sway on multi-storey un-braced steel frames bending on weak axis with partial strength connections vol.38, pp.6, 2004, https://doi.org/10.12989/sem.2011.38.6.825