DOI QR코드

DOI QR Code

Behaviour of flush end-plate beam-to-column joints under bending and axial force

  • da Silva, Luis Simoes (Civil Engineering Department, University of Coimbra) ;
  • de Lima, Luciano R.O. (Structural Engineering Department, UERJ - State University of Rio de Janeiro) ;
  • da S. Vellasco, Pedro C.G. (Structural Engineering Department, UERJ - State University of Rio de Janeiro) ;
  • de Andrade, Sebastiao A.L. (Civil Engineering Department, PUC-RIO - Pontifical Catholic University of Rio de Janeiro)
  • 투고 : 2002.08.12
  • 심사 : 2004.01.26
  • 발행 : 2004.04.25

초록

Steel beam-to-column joints are often subjected to a combination of bending and axial forces. The level of axial forces in the joint may be significant, typical of pitched-roof portal frames, sway frames or frames with incomplete floors. Current specifications for steel joints do not take into account the presence of axial forces (tension and/or compression) in the joints. A single empirical limitation of 10% of the beam's plastic axial capacity is the only enforced provision in Annex J of Eurocode 3. The objective of the present paper is to describe some experimental and numerical work carried out at the University of Coimbra to try to extend the philosophy of the component method to deal with the combined action bending moment and axial force.

키워드

참고문헌

  1. Cerfontaine, F. (2000), "Etude analytique de l'interaction entre moment de flexion et effort normal dans les assemblages boulonnes" (in french), Travail de fin d'etudes du DEA en Sciences Appliquees, Departement MSM, University of Liege, Belgium.
  2. Cruz, P., Silva, L.S., Rodrigues, D. and Simoes, R. (1998), "Database for the semi-rigid behaviour of beam-tocolumn connections in seismic regions", J. Constructional Steel Research, 46(120), 1-3. https://doi.org/10.1016/S0143-974X(98)00089-3
  3. EN 10002 (1990), "Metallic materials-tensile tests. Part1: method of test (at ambient temperature)", CEN, European Committee for Standardisation.
  4. EN 10020 (1989), "Steel definition and classification", CEN, European Committee for Standardisation.
  5. EN 10025 (1994), "Hot rolled products of non-alloy structural steels", CEN, European Committee for Standardisation.
  6. Eurocode 3 (1998), ENV - 1993-1-1:1992/A2, Annex J, Design of Steel Structures - Joints in Building Frames. CEN, European Committee for Standardisation, Document CEN/TC 250/SC 3, Brussels.
  7. Eurocode 3 (2003), prEN 1993-1-8: 2003, Part 1.8: Design of Joints, Eurocode 3: Design of Steel Structures, Stage 49 draft., 5 May 2003. CEN, European Committee for Standardisation, Brussels.
  8. Faella, C., Piluso, V. and Rizzano, G. (2000), Structural Steel Semi-Rigid Connections: Theory, Design and Software, CRC Press LLC.
  9. FEA (2001), LUSAS 13.3 User Manual, FEA Ltd, UK.
  10. Jaspart, J.P., Braham, M. and Cerfontaine, F. (1999), "Strength of joints subjected to combined action of bending moment and axial force", in Proc. of the Conf. Eurosteel '99, CVUT Praha, Czech Republic, May 26-29, 465-468.
  11. Simoes da Silva, L. and Coelho, A. G. (2000), "A analytical evaluation of the response of steel joints under bending and axial force", Comput. Struct. 79, 873-881.
  12. Simoes da Silva, L., Lima, L., Vellasco, P. and Andrade, S. (2001), "Experimental and numerical assessment of beam-to-column joints under bending and axial force", Proc. of The First Int. Conf. on Steel & Composite Structures, 1, 715-722, June 2001, Pusan, Korea.

피인용 문헌

  1. Axial load effects on flush end-plate moment connections vol.170, pp.3, 2017, https://doi.org/10.1680/jstbu.15.00042
  2. Semi-rigid composite frames with perfobond and T-rib connectors Part 2: Design models assessment vol.63, pp.2, 2007, https://doi.org/10.1016/j.jcsr.2006.04.010
  3. Modelling of beam-to-column connections at elevated temperature using the component method vol.10, pp.1, 2010, https://doi.org/10.12989/scs.2010.10.1.023
  4. Modelling and behaviour of beam-to-column connections under axial force and cyclic bending vol.129, 2017, https://doi.org/10.1016/j.jcsr.2016.11.006
  5. Generalised component-based model for beam-to-column connections including axial versus moment interaction vol.65, pp.8-9, 2009, https://doi.org/10.1016/j.jcsr.2009.02.011
  6. Capacity of semi-rigid composite joints in accommodating column loss vol.139, 2017, https://doi.org/10.1016/j.jcsr.2017.09.029
  7. Parametric analyses on the initial stiffness of flush end-plate splice connections using FEM vol.64, pp.10, 2008, https://doi.org/10.1016/j.jcsr.2007.09.010
  8. Behaviour and design of beam-to-column connections under fire conditions vol.42, pp.6-7, 2007, https://doi.org/10.1016/j.firesaf.2006.09.003
  9. Parametric finite element analyses on flush end-plate joints under column removal vol.137, 2017, https://doi.org/10.1016/j.jcsr.2017.06.012
  10. Experimental evaluation of extended endplate beam-to-column joints subjected to bending and axial force vol.26, pp.10, 2004, https://doi.org/10.1016/j.engstruct.2004.04.003
  11. Towards a consistent design approach for steel joints under generalized loading vol.64, pp.9, 2008, https://doi.org/10.1016/j.jcsr.2008.02.017
  12. Component-based mechanical models for axially-loaded through-diaphragm connections to concrete-filled RHS columns vol.102, 2014, https://doi.org/10.1016/j.jcsr.2014.06.016
  13. Review on the modelling of joint behaviour in steel frames vol.67, pp.5, 2011, https://doi.org/10.1016/j.jcsr.2010.12.014
  14. Composite joints under M-N at elevated temperatures vol.124, 2016, https://doi.org/10.1016/j.jcsr.2016.05.012
  15. Experimental behaviour of heated composite steel–concrete joints subject to variable bending moments and axial forces vol.51, 2013, https://doi.org/10.1016/j.engstruct.2013.01.016
  16. Behaviour of open beam-to-tubular column angle connections under combined loading conditions vol.16, pp.2, 2014, https://doi.org/10.12989/scs.2014.16.2.157
  17. A parametric analysis of steel and composite portal frames with semi-rigid connections vol.28, pp.4, 2006, https://doi.org/10.1016/j.engstruct.2005.09.010
  18. Influence of the axial force on the behavior of endplate moment connections vol.49, pp.1, 2014, https://doi.org/10.12989/sem.2014.49.1.023
  19. Modelling of connection behaviour for progressive collapse analysis vol.113, 2015, https://doi.org/10.1016/j.jcsr.2015.06.008
  20. Moment-Rotation Model for Blind-Bolted Flush End-Plate Connections in Composite Frame Structures vol.141, pp.9, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001147
  21. Nonlinear dynamic analysis of steel portal frames with semi-rigid connections vol.30, pp.9, 2008, https://doi.org/10.1016/j.engstruct.2008.02.011
  22. A numerical study of beam-to-column joints subjected to impact vol.120, 2016, https://doi.org/10.1016/j.engstruct.2016.04.031
  23. Structural assessment of minor axis steel joints using photoelasticity and finite elements vol.65, pp.2, 2009, https://doi.org/10.1016/j.jcsr.2008.01.030
  24. Study of the mechanics of progressive collapse with simplified beam models vol.117, 2016, https://doi.org/10.1016/j.engstruct.2016.02.056
  25. Cyclic behaviour of bearing-type bolted connections with slot bolt holes pp.2048-4011, 2018, https://doi.org/10.1177/1369433218800835
  26. Design Tools for Bolted End-Plate Beam-to-Column Joints vol.2018, pp.2314-4912, 2018, https://doi.org/10.1155/2018/9689453
  27. Pinching in Steel Rack Joints: Numerical Modelling and Effects on Structural Response pp.2093-6311, 2018, https://doi.org/10.1007/s13296-018-0095-x
  28. Experimental Study on Innovative Π-Shaped Beam-to-Column Connections under Cyclic Loading vol.145, pp.5, 2019, https://doi.org/10.1061/(ASCE)ST.1943-541X.0002314
  29. Semi-rigid connection modeling for steel frameworks vol.35, pp.4, 2004, https://doi.org/10.12989/sem.2010.35.4.431
  30. Vibration analysis of a cracked beam with axial force and crack identification vol.9, pp.4, 2004, https://doi.org/10.12989/sss.2012.9.4.355
  31. Nonlinear P-Δ analysis of steel frames with semi-rigid connections vol.14, pp.1, 2004, https://doi.org/10.12989/scs.2013.14.1.001
  32. Simplified criteria for finite element modelling of European preloadable bolts vol.24, pp.6, 2017, https://doi.org/10.12989/scs.2017.24.6.643
  33. Cold formed steel semi rigid joints vol.71, pp.4, 2004, https://doi.org/10.1590/0370-44672017710121
  34. Dynamic increase factor for progressive collapse of semi-rigid steel frames with extended endplate connection vol.31, pp.6, 2004, https://doi.org/10.12989/scs.2019.31.6.617
  35. Experimental Full-Range Behavior Assessment of Bolted Moment End-Plate Connections vol.145, pp.8, 2004, https://doi.org/10.1061/(asce)st.1943-541x.0002368
  36. Influence of stiffeners on the performance of blind-bolt end-plate connections to CFST columns vol.36, pp.4, 2020, https://doi.org/10.12989/scs.2020.36.4.447
  37. Stiffness model for "column face in bending" component in tensile zone of bolted joints to SHS/RHS column vol.38, pp.6, 2004, https://doi.org/10.12989/scs.2021.38.6.637
  38. Experimental Database for Steel Flush End-Plate Connections vol.147, pp.7, 2004, https://doi.org/10.1061/(asce)st.1943-541x.0003064
  39. Simplified Methods for Progressive Collapse Assessment of Frame Structures vol.147, pp.11, 2004, https://doi.org/10.1061/(asce)st.1943-541x.0003190
  40. Research on the M-θ model considering the effect of axial force and bolt clearance of flower-gusset composite joints vol.34, pp.None, 2021, https://doi.org/10.1016/j.istruc.2021.08.025
  41. Retrofit of non-code conforming moment resisting beam-to-column joints: A case study vol.189, pp.None, 2004, https://doi.org/10.1016/j.jcsr.2021.107095