Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Inelastic distortional buckling of hot-rolled I-section beam-columns

  • Received : 2003.10.13
  • Accepted : 2004.02.10
  • Published : 2004.02.25
⟨ Previous Next ⟩

Abstract

The inelastic lateral-distortional buckling of doubly-symmetric hot-rolled I-section beam-columns subjected to a concentric axial force and uniform bending with elastic restraint which produce single curvature is investigated in this paper. The numerical model adopted in this paper is an energy-based method which leads to the incremental and iterative solution of a fourth-order eigenproblem, with very rapid solutions being obtained. The elastic restraint considered in this paper is full restraint against translation, but torsional restraint is permitted at the tension flange. Hitherto, a numerical method to analyse the elastic and inelastic lateral-distortional buckling of restrained or unrestrained beam-columns is unavailable. The prediction of the inelastic lateral-distortional buckling load obtained in this study is compared with the inelastic lateral-distortional buckling of restrained beams and the inelastic lateral-torsional buckling solution, by suppressing the out-of-plane web distortion, is published elsewhere and they agree reasonable well. The method is then extended to the lateral-distortional buckling of continuously restrained doubly symmetric I-sections to illustrate the effect of web distortion.

Keywords

References

  1. Abdel-Sayed, G. and Aglan, A.A. (1973), "Inelastic lateral torsional buckling of beam columns", Publications, IABSE, 33-II, 1-16.
  2. Bradford, M.A. (1986), "Inelastic distortional buckling of I-beams", Comput. Struct., 24(6), 923-933. https://doi.org/10.1016/0045-7949(86)90300-7
  3. Bradford, M.A. (1988), "Buckling of elastically restrained beams with distortions", Thin-Walled Struct., 6, 287-304. https://doi.org/10.1016/0263-8231(88)90005-5
  4. Bradford, M.A. (1997), "Lateral-distortional buckling of continuously restrained columns", J. Constructional Steel Research, 42(2), 121-139. https://doi.org/10.1016/S0143-974X(97)00023-0
  5. Bradford, M.A. and Cuk, P.E. (1988), "Elastic buckling of tapered monosymmetric I-beams", J. Struct. Eng., ASCE, 114(5), 977-996. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:5(977)
  6. Bradford, M.A., Cuk, P.E., Gizejowski, M.A. and Trahair, N.S. (1984). "Inelastic lateral buckling of beam-columns", Research Report No. 474, School of Civil and Mining Engineering, The University of Sydney.
  7. Bradford, M.A. and Trahair, N.S. (1982). "Distortional buckling of thin-web beam-columns", Eng. Struct., 4, 2-10. https://doi.org/10.1016/0141-0296(82)90017-7
  8. Bradford, M.A. and Trahair, N.S. (1985). "Inelastic buckling of beam-columns with unequal end moments", J. Constructional Steel Research, 5, 195-212. https://doi.org/10.1016/0143-974X(85)90003-3
  9. Bradford, M.A. and Trahair, N.S. (1986). "Inelastic buckling tests on beam-columns", J. Struct. Eng., ASCE, 112(3), 538-549. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:3(538)
  10. Broken Hill Proprietary Co. Ltd (1998), BHP Hot Rolled Products, BHP Co. Ltd, Melbourne, Australia.
  11. Cuk, P.E., Rogers, D.F. and Trahair, N.S. (1986), "Inelastic buckling of continuous steel beam-columns", J. Constructional Steel Research, 6, 21-52. https://doi.org/10.1016/0143-974X(86)90019-2
  12. Dawe, J.L. and Kulak, G.L. (1984). "Plate instability of W shapes", J. Struct. Eng., ASCE, 110(6), 1278-1291. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:6(1278)
  13. Fukumoto, Y. and Galambos, T.V. (1966), "Inelastic lateral-torsional buckling of beam-columns", J. Struct. Div., ASCE, 92(ST2), 41-61.
  14. Haaijer, G. (1957), "Plate buckling in the strain-hardening range", J. Eng. Mech. Div., ASCE, 83(EM2), 1212, 1-47.
  15. Lee, D-S (2001), "Distortional buckling of I-sections", PhD Thesis, The University of New South Wales, Australia.
  16. Lee, D-S. and Bradford, M.A. (2002), "Inelastic lateral-distortional buckling of continuously restrained rolled I-beams", Steel and Composite Structures, 2(4), 297-314. https://doi.org/10.12989/scs.2002.2.4.297
  17. Miranda, C. and Ojalvo, M. (1965), "Inelastic lateral-torsional buckling of beam-columns", J. Eng. Mech. Div., ASCE, 91(EM6), 21-37.
  18. Newmark, N.M. (1943), "Numerical procedure for computing deflections, moments, and buckling loads", Transactions, ASCE, 108, 1161-1188.
  19. Standards Australia (1988), AS4100-Steel Structures, S.A., Sydney, Australia.
  20. Timoshenko, S.P. and Gere, J.M. (1961), Theory of Elastic Stability, McGraw Hill, New York.
  21. Timoshenko, S.P. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw Hill, New York.
  22. Trahair, N.S. (1993), Flexural-Torsional Buckling of Structures, Chapman and Hall, London.
  23. Trahair, N.S. and Bradford, M.A. (1998), The Behaviour and Design of Steel Structures to AS 4100, 3rd Edn., E&FN Spon, London.

Cited by

  1. Partially restrained beam-column weak-axis moment connections of low-rise steel structures vol.76, pp.5, 2004, https://doi.org/10.12989/sem.2020.76.5.663