Wind and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Fluctuating wind loads across gable-end buildings with planar and curved roofs

  • Ginger, J.D. (Cyclone Testing Station, School of Engineering, James Cook University)
  • Received : 2003.07.11
  • Accepted : 2004.08.02
  • Published : 2004.12.25
⟨ Previous Next ⟩

Abstract

Wind tunnel model studies were carried out to determine the wind load distribution on tributary areas near the gable-end of large, low-rise buildings with high pitch planar and curved roof shapes. Background pressure fluctuations on each tributary area are described by a series of uncorrelated modes given by the eigenvectors of the force covariance matrix. Analysis of eigenvalues shows that the dominant first mode contributes around 40% to the fluctuating pressures, and the eigenvector mode-shape generally follows the mean pressure distribution. The first mode contributes significantly to the fluctuating load effect, when its influence line is similar to the mode-shape. For such cases, the effective static pressure distribution closely follows the mean pressure distribution on the tributary area, and the quasi-static method would provide a good estimate of peak load effects.

Keywords

References

  1. American Society of Civil Engineers (2002), Minimum Design Loads for Buildings and Other Structures, ASCE7-02.
  2. AS/NZS 1170.2 Structural design actions - Part 2: Wind actions (2002).
  3. Ginger, J.D. and Holmes, J.D. (2001), "Wind loads on long, low-rise buildings", Proc. 5th Asia Pacific Conf. onWind Engineering, Kyoto, Japan, 529-532.
  4. Ginger, J.D. and Holmes, J.D. (2003), "Effect of building length on wind loads on low-rise buildings with asteep roof pitch", J. Wind Eng. Ind. Aerody., 91, 1377-1400. https://doi.org/10.1016/j.jweia.2003.08.003
  5. Ginger, J.D. (2003), "Fluctuating wind pressures across gable-end buildings", Preprints 11th Int. Conf. on WindEngineering, Vol. 1, Lubbock, Texas, USA, 1214-1220.
  6. Holmes, J.D. and Best, R.J. (1981), "An approach to the determination of wind load effects on low-risebuildings", J. Wind Eng. Ind. Aerody., 7, 273-287. https://doi.org/10.1016/0167-6105(81)90054-4
  7. Holmes, J.D. (1988), "Analysis and synthesis of pressure fluctuations on bluff bodies using eigenvectors",International Colloquium on Bluff Body Aerodynamics and its Applications, Kyoto, Japan, 291-302.
  8. Holmes, J.D. (1992), "Optimized peak load distributions", J. Wind Eng. Ind. Aerody., 41-44, 267-276.
  9. Holmes, J.D. (2002), "Effective static load distributions in wind engineering", J. Wind Eng. Ind. Aerody., 90, 91-109. https://doi.org/10.1016/S0167-6105(01)00164-7
  10. Kasperski, M. and Niemann, H.J. (1989), "Identification of critical load distributions for wind loading", 5th Int.Conf. on Structural Safety and Reliability, San Francisco, USA.

Cited by

  1. Design Wind Loads on Gable-Ended Low-Rise Buildings with Moderate and Steep Roof Slopes vol.6, pp.2, 2004, https://doi.org/10.1080/13287982.2006.11464947
  2. Dynamic characteristics and wind-induced vibration coefficients of purlin-sheet roofs vol.22, pp.5, 2016, https://doi.org/10.12989/scs.2016.22.5.1039