Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Interface characteristics of RC beams strengthened with FRP plate

  • Peng, Minglan (School of Civil Engineering, Beijing Jiaotong University) ;
  • Shi, Zhifei (School of Civil Engineering, Beijing Jiaotong University)
  • Received : 2003.06.19
  • Accepted : 2004.04.22
  • Published : 2004.09.25
⟨ Previous Next ⟩

Abstract

A four-point bending RC beam strengthened with FRP plate is investigated based on the theory of elasticity. Taking the adhesive layer into account but ignoring some secondary parameters, the analytical solutions of the normal stress and shear stress on concrete-adhesive interface are obtained and discussed. Besides, the pure bending region of the beam is analyzed and the ultimate load of the beam is predicted. The results obtained in the present paper agree very well with both the results of FEM and the experimental findings.

Keywords

References

  1. Arduini, M. and Nanni, A. (1997), "Parametric study of beams with externally bonded FRP reinforcement", ACI Struct. J., 94(5), 493-501.
  2. Arduini, M., Tommas, A.D. and Nanni, A. (1997), "Brittle failure in FRP plate and sheet bonded beams", ACI Struct. J., 94(4), 363-370.
  3. Chajes, M.J., Finch, W.W., Januszka, T.F. and Thomson, T.A. (1996), "Bond and force transfer of composite material plates bonded to concrete", ACI Struct. J., 93(2), 259-303.
  4. Malek, A.M., Saadatmanesh, H. and Ehsani, M.R. (1998), "Prediction of failure of R/C beams strengthened with FRP plate due to stress concentration at the plate end", ACI Struct. J., 95(1), 142-152.
  5. Nakaba, K., Kanakubo, T., Furuta, T. and Yoshizawa, H. (2001), "Bond behavior between fiber-reinforced polymer laminates and concrete", ACI Struct. J., 98(3), 359-367.
  6. OuYang, Y. and Qian, Z.Z. (2000), "The analysis of bonding shear stress of RC beams strengthened with plate", China Civil Engineering Journal, 30(8), 51-54.
  7. OuYang, Y. and Huang, Y.H. (2002), "Flexural behavior of reinforced concrete beams strengthened with glass fiber", China Civil Engineering Journal, 35(3), 1-8.
  8. Ritchie, P.A., David, A.T., Lu, Le-Wu and Guy, M.C. (1991), "External reinforcement of concrete beams using fiber reinforced plastics", ACI Struct. J., 88(4), 490-500.
  9. Roberts, T.M. (1989), "Approximate analysis of shear and normal stress concentrations in the adhesive layer of plated RC beams", Struct. Eng., 67(12), 228-233.
  10. Shahawy, M.A., Arockiasamy, M., Beitelman, T. and Sowrirajan, R. (1996), "Reinforced concrete rectangular beams strengthened with CFRP laminates", Composite Part B, 27B(3/4), 225-233.
  11. Tommaso, A.D., Neubaure, U., Pantuso, A. and Rostasy, F.S. (2001), "Behavior of adhesively bonded concrete-CTRP joints at low and high temperatures", Mechanics of Composite Materials, 37(4), 327-338. https://doi.org/10.1023/A:1012392703519
  12. Xie, M., Zhao, L. and Karbhari, V.M. (1995), "Study of bond strength of composites and composite materials", ICCM-10, Whistler, B.C., Canada, August, III613-620.
  13. Zheng, D.H. (1999), "Theoretical study and numerical analysis of the mechanical properties of interface in hybrid structures", Master Dissertation of Northern Jiaotong University.

Cited by

  1. Experimental study on flexural strength of modular composite profile beams vol.7, pp.1, 2007, https://doi.org/10.12989/scs.2007.7.1.071
  2. Experimental study on flexural strength of reinforced modular composite profiled beams vol.8, pp.4, 2004, https://doi.org/10.12989/scs.2008.8.4.313
  3. Study on behavior of T-section modular composite profiled beams vol.10, pp.5, 2004, https://doi.org/10.12989/scs.2010.10.5.457
  4. Investigation on the flexural behavior of an innovative U-shaped steel-concrete composite beam vol.34, pp.3, 2004, https://doi.org/10.12989/scs.2020.34.3.441