DOI QR코드

DOI QR Code

Strength enhancement in confined concrete with consideration of flexural flexibilities of ties

  • Teerawong, J. (Department of Civil Engineering, Chulalongkorn University) ;
  • Lukkunaprasit, P. (Department of Civil Engineering, Chulalongkorn University) ;
  • Senjuntichai, T. (Department of Civil Engineering, Chulalongkorn University)
  • Received : 2003.09.01
  • Accepted : 2004.03.11
  • Published : 2004.08.25

Abstract

The interaction between concrete core expansion and deformation of perimeter ties has been known to have a significant effect on the effective confinement of rectangular reinforced concrete (RC) tied columns. This interaction produces passive confining pressure to the concrete core. Most existing models for determining the response of RC tied columns do not directly account for the influence of flexural stiffness of the ties and the variation of confining stress along the column height. This study presents a procedure for determining the confined compressive strength of RC square columns confined by rectilinear ties with various tie configurations considering directly the influence of flexural flexibility of the ties and the variation of confining stress along the vertical direction. The concept of area compatibility is employed to ensure compatibility of the concrete core and steel hoop in a global sense. The proposed procedure yields satisfactory predictions of confined strengths compared with experimental results, and the influence of tie flexibility, tie configuration and degree of confinement can be well captured.

Keywords

References

  1. Ahmad, S.H. and Shah, S.P. (1982), "Stress-strain curves of concrete confined by spiral reinforcement", ACI J., 79(6), 484-490.
  2. Assa, B., Nishiyama, M. and Watanabe, F. (2001a), "New approach for modeling confined concrete I: Circular columns", J. Struct. Eng., ASCE, 127(7), 743-750. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(743)
  3. Assa, B., Nishiyama, M. and Watanabe, F. (2001b), "New approach for modeling confined concrete II: Rectangular columns", J. Struct. Eng., ASCE, 127(7), 751-757. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(751)
  4. Chen, W.F. and Sohal, I. (1995), Plastic Design and Second-Order Analysis of Steel Frames, Springer-Verlag, New York, N.Y.
  5. Cusson, D. and Paultre, P. (1995), "Stress-strain model for confined high-strength concrete", J. Struct. Eng., ASCE, 121(3), 468-477. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(468)
  6. Imran, I. and Pantazopoulou, S.J. (1996), "Experimental study of plain concrete under triaxial stress", ACI Mat. J., 93(6), 589-601.
  7. Legeron, F. and Paultre, P. (2003), "Uniaxial confinement model for normal- and high-strength concrete columns", J. Struct. Eng., ASCE, 129(2), 241-252. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:2(241)
  8. Madas, P. and Elnashai, A.S. (1992), "A new passive confinement model for the analysis of concrete structures subjected to cyclic and transient dynamic loading", Earthq. Eng. Struct. Dyn., 21, 409-431. https://doi.org/10.1002/eqe.4290210503
  9. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  10. Mau, S.T., Elwi, A.E. and Zhou, S.Z. (1998), "Analytical study of spacing of lateral steel and column confinement", J. Struct. Eng., ASCE, 124(3), 262-269. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:3(262)
  11. Nagashima, T., Sugano, S., Kimura, H. and Ichikawa, A. (1992), "Monotonic axial compression test on ultrahigh- strength concrete tied columns", Proc. 10th World Conf. on Earthquake Engrg., Balkema, Rotterdam, The Netherlands, 2983-2988.
  12. Nishiyama, M., Fukushima, I., Watanabe, F. and Muragama, H. (1993), "Axial loading tests on high-strength concrete prisms confined by ordinary and high-strength steel", Proceedings Symp. on High-Strength Concrete, 322-329.
  13. Pantazopoulou, S.J. and Mills, R.H. (1995), "Microstructural aspects of the mechanical response of plain concrete", ACI Mat. J., 92(6), 605-616.
  14. Paultre, P. and Légeron, F. (1999), "Seismic behavior of high-strength concrete tied columns", High-strength Concrete, First Int. Conf., ASCE, 159-172.
  15. Razvi, S. and Saatcioglu, M. (1999), "Confinement model for high-strength concrete", J. Struct. Eng., ASCE, 125(3), 281-289. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(281)
  16. Richart, F.E., Brandtzaeg, A. and Brown, R.L. (1928), "A study of the failure of concrete under combined compressive stresses", Engineering Experiment Station Bulletin No. 185, University of Illinois, Urbana.
  17. Rokugo, K., Iwasa, M., Suzuki, T. and Koyanagi, W. (1989), "Testing methods to determine tensile strain softening curve and fracture energy of concrete", Fracture Toughness and Fracture Energy-test Method for Concrete and Rock, H. Mihashi, H. Takahashi and F.H. Wittmann, eds., Balkema, Rotterdam, The Netherlands, 153-163.
  18. Saatcioglu, M. and Razvi, S. (1992), "Strength and ductility of confined concrete", J. Struct. Eng., ASCE, 118(6), 1590-1607. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1590)
  19. Sato, H. and Yamaguchi, K. (2000), "Stress-strain behavior of square confined concrete column", Proc. 12th World Conf. on Earthquake Eng., No. 2284.
  20. Sheikh, S.A. and Uzumeri, S.M. (1982), "Analytical model for concrete confinement in tied columns", J. Struct. Eng., ASCE, 108(ST12), 2703-2723.
  21. Sun, Y.P., Oba, T., Tian, F.S. and Ikeda, T. (1996), "Confinement effects of transverse hoops in high-strength concrete", Proc. 11th World Conf. on Earthquake Eng., No. 1363.

Cited by

  1. Analytical model for high-strength concrete columns with square cross-section vol.28, pp.3, 2008, https://doi.org/10.12989/sem.2008.28.3.295
  2. Compressive behavior of short high-strength concrete columns vol.32, pp.9, 2010, https://doi.org/10.1016/j.engstruct.2010.04.045