Structural Engineering and Mechanics

  • 제17권2호
  • /
  • Pages.215-244
  • /
  • 2004
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Deformation-based vulnerability functions for RC bridges

  • Elnashai, A.S. (CEE Department, 205 North Mathews Avenue, University of Illinois at Urbana-Champaign) ;
  • Borzi, B. (EQE International Ltd.) ;
  • Vlachos, S. (Thomi Engineering)
  • 투고 : 2003.04.13
  • 심사 : 2003.10.01
  • 발행 : 2004.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

There is an ever-increasing demand for assessment of earthquake effects on transportation structures, emphasised by the crippling consequences of recent earthquakes hitting developed countries reliant on road transportation. In this work, vulnerability functions for RC bridges are derived analytically using advanced material characterisation, high quality earthquake records and adaptive inelastic dynamic analysis techniques. Four limit states are employed, all based on deformational quantities, in line with recent development of deformation-based seismic assessment. The analytically-derived vulnerability functions are then compared to a data set comprising observational damage data from the Northridge (California 1994) and Hyogo-ken Nanbu (Kobe 1995) earthquakes. The good agreement gives some confidence in the derived formulation that is recommended for use in seismic risk assessment. Furthermore, by varying the dimensions of the prototype bridge used in the study, and the span lengths supported by piers, three more bridges are obtained with different overstrength ratios (ratio of design-to-available base shear). The process of derivation of vulnerability functions is repeated and the ensuing relationships compared. The results point towards the feasibility of deriving scaling factors that may be used to obtain the set of vulnerability functions for a bridge with the knowledge of a 'generic' function and the overstrength ratio. It is demonstrated that this simple procedure gives satisfactory results for the case considered and may be used in the future to facilitate the process of deriving analytical vulnerability functions for classes of bridges once a generic relationship is established.

키워드

참고문헌

  1. ATC 6-2 (1983), "Seismic retrofitting guidelines for highway bridges", Applied Technology Council, Redwood City, California; also FHWA/RD 83/007 report.
  2. Basöz, N.I. and Kiremidjian, A.S. (1997), "Evaluation of bridge damage data from the 1994 Northridge, CA earthquake", NCEER-97-0005, Workshop on Earthquake Engineering Frontiers in Transportation Facilities, 167-181.
  3. Basöz, N.I., Kiremidjian, A.S. and Straser, E. (1994), "Prioritization of bridges for seismic retrofitting", Fifth U.S. National Conf. on Earthq. Eng., 881-890.
  4. Basöz, N.I., Kiremidjian, A.S. and King, S.A. (1999), "Statistical analysis of bridge damage data from the 1994 Northridge, CA, earthquake", Earthquake Spectra, 15, 25-54. https://doi.org/10.1193/1.1586027
  5. Eurocode 8 (1994), "Design provision for earthquake resistance of structures", ENV 1998-1, CEN, Brussels.
  6. Ghobarah, A. and Ali, H.M. (1988), "Seismic performance of highway bridges", Eng. Struct., 10, 157-166. https://doi.org/10.1016/0141-0296(88)90002-8
  7. Hognestad, E. (1951), "A study of combined bending and axial load in reinforced concrete members", University of Illinois Bulletin, Bulletin Series No 399.
  8. Hoshikuma, J., Kawashima, K., Nagaya, K. and Taylor, A.W. (1997), "Stress-strain model for confined reinforced concrete in bridge piers", J. Struct. Eng., ASCE, 624-633.
  9. Izzudin, B.I. and Elnashai, A.S. (1989), "ADAPTIC: A program for the adaptive large displacement inelastic dynamic analysis of frames", ESEE Report no. 89-7, Imperial College, London, UK.
  10. Kappos, A., Chryssanthopoulos, M.K. and Dymiotis, C. (1998), "Prababilistic assessment of European seismic design practice for confined members", European Earthq. Eng., 12, 38-51.
  11. Kawashima, K. and Unjoh, S. (1997), "The damage of highway bridges in the 1995 Hyogo-Ken Nanbu earthquake and its impact on Japanese seismic design", J. Earthq. Eng., 1(3), 505-543. https://doi.org/10.1142/S1363246997000192
  12. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", Proceeding ASCE, 97, 1969-1990.
  13. Mattock, A.H., Kirz, L.B. and Hougnestad, E. (1961), "Rectangular concrete stress distribution in ultimate strength design", J. ACI, 57, 875-826.
  14. Ming, J.Y., Lui, E.M. and Liu, Y. (2001), "Dynamic response of skew highway bridges", J. Earthq. Eng., 5, 205- 223. https://doi.org/10.1142/S1363246901000352
  15. Mirza, S.A., Hatzinikolas, M. and MacGregor, J.G. (1979), "Statistical descriptions of strength of concrete", ASCE J. the Struct. Div., 105, 1021-1037.
  16. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, Wiley-Interscience.
  17. Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, Wiley-Interscience.
  18. Pipa, M. and Carvalho, E.C. (1995), "Reinforcing steel characteristics for earthquake resistant structures", 10th European Conf. on Earthq. Eng., 2887-2892.
  19. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996), Seismic Design and Retrofit of Bridges, Wiley-Interscience.
  20. Rossetto, T. and Elnashai, A.S. (2003), "Derivation of vulnerability functions for European-type RC structures based on observational data", Engineering Structures, Accepted for Publication February.
  21. Shinozuka, M., Feng, M,Q., Kim, H-K. and Kim, S-H. (2000), "Nonlinear static procedures for fragility curve development", J. Eng. Mech., ASCE, 126, 1287-1295. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1287)
  22. Yamazaki, F., Onishi, J. and Tayama, S. (1999), "Earthquake damage assessment of expressway structure in Japan", Asian-Pacific Symposium on Structural Reliability and its Applications, 1-10.

피인용 문헌

  1. Effect of Asynchronous Earthquake Motion on Complex Bridges. I: Methodology and Input Motion vol.13, pp.2, 2008, https://doi.org/10.1061/(ASCE)1084-0702(2008)13:2(158)
  2. Fuzzy regression decision systems for assessment of the potential vulnerability of bridge to earthquakes vol.64, pp.1, 2012, https://doi.org/10.1007/s11069-012-0230-5
  3. R -Factor Parameterized Bridge Damage Fragility Curves vol.12, pp.4, 2007, https://doi.org/10.1061/(ASCE)1084-0702(2007)12:4(500)
  4. EFFECT OF SKEW ANGLE ON SEISMIC VULNERABILITY OF RC BOX-GIRDER HIGHWAY BRIDGES vol.13, pp.06, 2013, https://doi.org/10.1142/S0219455413500132
  5. Methodology for the development of analytical fragility curves for retrofitted bridges vol.37, pp.8, 2008, https://doi.org/10.1002/eqe.801
  6. Seismic Reliability Assessment of Bridges with User-Defined System Failure Events vol.137, pp.10, 2011, https://doi.org/10.1061/(ASCE)EM.1943-7889.0000272
  7. Seismic fragility assessment of highway bridges: a state-of-the-art review vol.11, pp.6, 2015, https://doi.org/10.1080/15732479.2014.912243
  8. Analytical Fragility Curves for Ordinary Highway Bridges in Turkey vol.27, pp.4, 2011, https://doi.org/10.1193/1.3651349
  9. Seismic fragility analysis of bridge response due to spatially varying ground motions vol.4, pp.4, 2015, https://doi.org/10.12989/csm.2015.4.4.297
  10. State-dependent fragility curves of bridges based on vibration measurements vol.33, 2013, https://doi.org/10.1016/j.probengmech.2013.03.007
  11. Effect of the angle of seismic incidence on the fragility curves of bridges vol.41, pp.14, 2012, https://doi.org/10.1002/eqe.2197
  12. Seismic vulnerability of skew bridges under bi-directional ground motions vol.71, 2014, https://doi.org/10.1016/j.engstruct.2014.04.013
  13. Development of fragility curves for RC bridges subjected to reverse and strike-slip seismic sources vol.11, pp.3, 2016, https://doi.org/10.12989/eas.2016.11.3.517
  14. Seismic Fragility of Multispan Simply Supported Bridge with Drop Spans and Steel Bearings vol.20, pp.12, 2015, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000778
  15. Seismic performance of skewed highway bridges using analytical fragility function methodology vol.16, pp.5, 2015, https://doi.org/10.12989/cac.2015.16.5.723
  16. Seismic risk assessment of reinforced concrete bridges in flood-prone regions vol.9, pp.9, 2013, https://doi.org/10.1080/15732479.2011.649292
  17. Seismic fragility assessment of effectiveness of viscous dampers in R/C buildings under scenario earthquakes vol.30, pp.5, 2008, https://doi.org/10.1016/j.strusafe.2007.06.001
  18. Effects of eccentric steel bracing systems on seismic fragility curves of mid-rise R/C buildings: A case study vol.33, pp.1, 2011, https://doi.org/10.1016/j.strusafe.2010.09.001
  19. Influence of scour effects on the seismic response of reinforced concrete bridges vol.76, 2014, https://doi.org/10.1016/j.engstruct.2014.06.026
  20. Vulnerability Assessment of Cable-Stayed Bridges in Probabilistic Domain vol.14, pp.4, 2009, https://doi.org/10.1061/(ASCE)1084-0702(2009)14:4(270)
  21. Simple method for real-time seismic damage assessment of bridges vol.78, 2015, https://doi.org/10.1016/j.soildyn.2015.07.005
  22. On seismic vulnerability of highway bridges in Nepal: 1988 Udaypur earthquake (M W 6.8) revisited vol.99, 2017, https://doi.org/10.1016/j.soildyn.2017.05.014
  23. Analysis of the differentiation in human vulnerability to earthquake hazard between rural and urban areas: case studies in 5.12 Wenchuan Earthquake (2008) and 4.20 Ya’an Earthquake (2013), China vol.30, pp.1, 2015, https://doi.org/10.1007/s10901-014-9397-2
  24. Earthquake Damage Estimations: ShakeCast Case Study on Nevada Bridges vol.33, pp.1, 2017, https://doi.org/10.1193/121815EQS185M
  25. Methodology for the development of bridge-specific fragility curves vol.46, pp.1, 2017, https://doi.org/10.1002/eqe.2774
  26. Seismic Risk Analysis of Steel-MRFs by Means of Fragility Curves in High Seismic Zones vol.17, pp.9, 2014, https://doi.org/10.1260/1369-4332.17.9.1227
  27. Probabilistic Evaluation of Effects of Column Moment Magnification Factor on Seismic Performance of Reinforced Concrete Frames vol.243-249, pp.1662-8985, 2011, https://doi.org/10.4028/www.scientific.net/AMR.243-249.251
  28. Integrated seismic risk and resilience assessment of roadway networks in earthquake prone areas pp.1573-1456, 2018, https://doi.org/10.1007/s10518-018-0457-y
  29. Probabilistic Seismic Performance Analysis of RC Bridges pp.1559-808X, 2018, https://doi.org/10.1080/13632469.2018.1477637
  30. Analytical Seismic Fragility Curves for Reinforced Concrete Wall pier using Shape Memory Alloys considering maximum drift vol.258, pp.2261-236X, 2019, https://doi.org/10.1051/matecconf/201925804001
  31. Decision tree–based seismic damage prediction for reinforcement concrete frame buildings considering structural micro-characteristics pp.2048-4011, 2019, https://doi.org/10.1177/1369433219832508
  32. Nonlinear spectral design analysis of a structure for hybrid self-centring device enabled structures vol.61, pp.6, 2017, https://doi.org/10.12989/sem.2017.61.6.701
  33. Derive empirical fragility functions for Nepali residential buildings vol.171, pp.None, 2004, https://doi.org/10.1016/j.engstruct.2018.06.018
  34. Seismic fragility analysis of jacket type offshore platforms considering soil-pile-structure interaction vol.174, pp.None, 2004, https://doi.org/10.1016/j.engstruct.2018.07.066
  35. Bridge-specific fragility analysis: when is it really necessary? vol.17, pp.4, 2004, https://doi.org/10.1007/s10518-018-00525-9
  36. Seismic Vulnerability Assessment Methodologies for Roadway Assets and Networks: A State-of-the-Art Review vol.13, pp.1, 2004, https://doi.org/10.3390/su13010061
  37. Seismic intensity measures for risk assessment of bridges vol.19, pp.9, 2021, https://doi.org/10.1007/s10518-021-01114-z
  38. Empirical seismic vulnerability analysis of infrastructure systems in Nepal vol.19, pp.14, 2004, https://doi.org/10.1007/s10518-021-01219-5