한국재료학회지 (Korean Journal of Materials Research)

  • 제14권7호
  • /
  • Pages.522-528
  • /
  • 2004
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

전산모사를 이용한 히트싱크의 열 유동 해석

Heat flow Analysis of Heat Sink Using the Computational Simulation

  • 임송철 (서울산업대학교 신소재공학과) ;
  • 장시영 (한국항공대학교 항공재료공학과) ;
  • 김현태 ((주) 아이메탈아이) ;
  • 이동헌 ((주) 아이메탈아이) ;
  • 강계명 (서울산업대학교 신소재공학과)
  • Lim Song Chul (Dept. Materials Science and Eng., Seoul National University of Technology) ;
  • Chang Si Young (Dept. of Materials Eng., Hankuk Aviation University) ;
  • Kim Hyon Tae (International Metal Institute Inc.) ;
  • Lee Dong Heon (International Metal Institute Inc.) ;
  • Kang Kae Myung (Dept. Materials Science and Eng., Seoul National University of Technology)
  • 발행 : 2004.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Heat analysis of the plate type and wave type heat sink were carried out by using computational simulation. The heat resistance and air flow of two heat sink models were analysed according to natural and forced convection condition and positions of fan. When a fan was at the position of z-axis and y-axis in forced convection, the heat resistances of plate type heat sink were $0.17^{\circ}C/W$, and $0.28^{\circ}C/W$ respectively. In the case of wave type heat sink, they were $0.18^{\circ}C/W$ and $0.53^{\circ}C/W$. As the air flow velocities were averagely $0.386\;m/s\~3.269\;m/s$, air flow velocity of plate type heat sink was faster than that of wave type. In this experiment, it was observed that the plate type heat sink showed a good ability of heat radiation comparing with wave type one.

키워드

참고문헌

  1. H.-C. Chien, M.-H. Tseng, C.- Y. Wang, C.-H. Chu , in Proceedings Seventeenth IEEE SEMI-THERM Symposium, IEEE, p.219 (2001) https://doi.org/10.1109/STHERM.2001.915181
  2. Shaukatullah, H., Storr, R. W., Hansen, J. B. and Gaynes, A. M., 1996, 'Design and Optimization of Pin Fin Heat Sinks for Low Velocity Applications,' IEEE Trans. on Components, Packaging, and Manufacturing Technology-Part A, Vol. 19, No. 5, pp. 486-494 https://doi.org/10.1109/95.554929
  3. Kamal Karimanal and Rajesh Nair, in Proceedings 2000 Inter Society Conferer on Thermal Phenome, IEEE, p.308, (2000) https://doi.org/10.1109/ITHERM.2000.866841
  4. Manoj Nagulapally and Kamal Karimanal, in Proceedings 2002 Inter Society Conference on Thermal Phenome, IEEE, p.330 (2002) https://doi.org/10.1109/ITHERM.2002.1012475
  5. Linton, R. L. and Agonafer, D., IEEE Transactions on Components, Packaging and Manufacturing Technology Part A, 18(3), (1995) https://doi.org/10.1109/95.465146
  6. Shri Sridhar, IEEE, p.876 (1995)
  7. C-W Tu and R. L. Webb, in Proceedings Seventeenth IEEE SEMI-THERM Symposium, IEEE, p.18 (2001) https://doi.org/10.1109/STHERM.2001.915139
  8. Icepak 4.1 user's guide. Lebanon, NH : Fluent Inc., (2003)