Abstract
Fatigue tests were carried out for butt welded joints with SM520-TMC steel plate with thickness between 20mm and 80mm. The test results were analysed statistically and the effect of plate thickness on the fatigue strength investigated. The fatigue strengths based on nominal stress range satisfy the requirement of the standards. Due to misalignment of the specimens, the measured stresses are higher than the nominal stresses especially for 20mm thick plates. If fatigue strengths are evaluated based on the measured stresses, then the fatigue strengths are greater than those based on nominal stresses. The results show that the thickness effect is similar to the formula proposed by Gurney.
축방향 인장응력이 작용하는 두께 20-80mm의 SM520-TMC강 맞대기 용접부를 대상으로 피로시험을 수행하였다. 시험 결과를 통계 분석하여 두께의 변화 및 용접방법에 따른 피로 강도를 검토하였다. 공칭응력을 기준으로 한 피로강도는 국내외의 기존 기준을 만족한다. 두께가 작은 경우에는 시험체의 제작오차에 따른 휨응력이 상당히 큰 것으로 나타났다. 측정값을 기준으로 한 피로강도는 공칭응력을 기준으로 한 경우보다 두께가 작은 20mm 경우 크게 증가하였다. 피로강도의 감소는 Gurney의 제안식과 유사한 것으로 나타났다.