초록
Mach Zehnder 간섭계의 원리를 이용하여 두개의 광섬유 커플러를 연결시 두 연결 포트사이에 길이차를 발생시킴으로써 DWDM (Dense Wavelength Division Multiplexer)에 사용할 수 있는 전광섬유형 인터리버(Interleaver)를 제작하였으며 $CO_2$ 레이저를 이용하여 미세 파장조절을 하였다. 광다중화기의 출력중심파장이 주위온도변화에 영향을 받지 않도록 하기 위해서 외부 온도제어기를 사용하지 않은 수동온도보상 패키지가 적용되었다. 열광학 효과를 보상하기 위해서 인터리버 패키지 재질보다 열팽창계수가 큰 기판을 선택하여 온도보상이 되게 하였고 온도보상의 정도는 두 광섬유 커플러 사이의 위치조절을 통하여 이루어 졌다. 결과적으로 $60^{\circ}C$ 정도의 주위온도 변화에 대해서 출력파장 0.05nm이내에서 변하도록 제작 할 수 있다.
In this paper, we report Mach Zehnder Interleaver of optical fiber type is fabricated by the fabrication system only for interfermeter design, and it is used $CO_2$ laser to adjust precisely the wavelength. The optical fiber is very sensitive in the thermal variation around. Thus, When fabrication the prototype, it is applied a technique to compensate the optical thermal effect because the center wavelength at the output is shifted according to the thermal variation around. it can he done by applying a substrate with high thermal expansion coefficient as well as an adjusting the position between two optical fiber couplers. Consequently, the output wavelength is shifted within 0.05 nm when the surrounding temperature varies until $60^{\circ}C$.