Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지

A Study on the Environmental Fraternized Preparation of Inorganic/organic Core-shell Binder

환경친화적인 무기/유기 Core-Shell의 제조에 관한 연구

  • Seoul, Soo-Duk (Department of Chemical Engineering, Dong-A University) ;
  • Lim, Jae-Keel (Department of Chemical Engineering, Dong-A University) ;
  • Lim, Jong-Min (Department of Chemical Engineering, Dong-A University) ;
  • Kwon, Jae-Beom (Department of Safety Engineering, Pukyong National University) ;
  • Lee, Nae-Woo (Department of Safety Engineering, Pukyong National University)
  • 설수덕 (동아대학교 화학공학과) ;
  • 임재길 (동아대학교 화학공학과) ;
  • 임종민 (동아대학교 화학공학과) ;
  • 권재범 (부경대학교 안전공학과) ;
  • 이내우 (부경대학교 안전공학과)
  • Published : 2004.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Composite particles using inorganic and organic chemicals were synthesized and the results of those reaction were compared to variation of temperature and agitation speed in presence of $CaCO_3$ which was adsorbed SDBS. Also the synthesises were optimized according to conversion rate of composite particles. In inorganic/organic core-shell composite particle polymerization, $CaCO_3$ adsorbed by 0.5wt% surfactant SDBS was prepared initially and then core $CaCO_3$ was encapsulated by sequential emulsion polymerization using MMA at the addition of APS 3.16${\times}$$10^{-3}$mol/L to minimize the coagulated PMMA particle itself during MMA shell polymerization. Encapsulated PMMA on $CaCO_3$ as inorganic/organic core-shell particles was verified by FT-IR and DSC analysis. It was found that the $CaCO_3$ was very well encapsulated by PMMA as shell. The surfaces were distinctly found as spindle shape and broad particle distribution after capsulation.

Keywords

References

  1. L. E. Nielsen, 'Mechanical Properties of Polymers and Composite', Marcel Dekker Inc., 1974
  2. M. Hasegawa, K. Arai, S. Saito, 'Uniform Encapsulation of Fine Inorganic Power with Soapless Emulsion Polymerizaiton', J. Polym. Sci. Part A, Polym. Chem. Vol. 25, No. 11, pp. 3117-3125, 1987 https://doi.org/10.1002/pola.1987.080251115
  3. 권재범, 이재우, 설수덕, 임재길, 임종민, '환경친화적인 Core shell Binder의 제조에 관한 연구', 산업안전학회지 Submitted, 2003년 6월
  4. 이선룡, 강돈오, 이내우, 설수덕, '유화 종합에 의한 Methyl methacrylate/ Styrene계 Core-shell라텍스 입자 제조에 관한 연구', 한국고무학회, 제37권, 제1호, pp. 21-30, 2002
  5. W. D. Hergeth, P. Starre, K. Schmutzler, S. Wartewig, 'Polymerizations in the Presence of Seeds : 3. Emulsion Polymerization of Vinyl Acetate in the Presence of Quartz Powder', Polymer, Vol. 29 No.7, pp. 1323-1328, 1998 https://doi.org/10.1016/0032-3861(88)90064-X
  6. K. Furusawa, Y. Kimura, T. Tagawa, 'Syntheses of Composite Polystyrene Latices with Silica Particle in the Core', J. colloid and Interface sci., Vol. 109, No. 1, pp. 69-76, 1986 https://doi.org/10.1016/0021-9797(86)90282-1
  7. M. Konno, K. Shimizu, K. Ami, S. Saito, 'Soapless Emulsion Polymerization of Methyl Methacarylate in Water in the Presnece pf Barium Sulfate', J. Polym. Sci. Part A, Polym. Chern., Vol. 25 No. 1, pp. 223-230, 1987 https://doi.org/10.1002/pola.1987.080250119
  8. M. Hasegawa, K. Arai, S. Saito, 'Effect of Surfactant Adsorbed on Encapsulation of Fine Inorganic Power with Soapless Emulsion Polymerization', J. polym. sci. Part A, Polym. chem. Vol. 25 No. 12, pp. 3231-3239, 1987 https://doi.org/10.1002/pola.1987.080251205
  9. M. Hasegawa, K. Arai, S. Saito, 'Selective Adsorption of Polymer on Freshly GrOlmd Solid Surfaces in Soapless Emulsion Polymerization', J. Applied polym. sci., Vol. 33 No. 2, pp. 411-418, 1987 https://doi.org/10.1002/app.1987.070330212
  10. M. Mosquet, Y. Chevalier, and P. Le Perchec, 'The mechanism of fluidization of concentrated calcium carbonate slurries by poly(oxyethylene) dishosphonates', Colloid Polym. Sci., : KolloidZeitschrift & Zeitschrift Polym., Vol. 277, No. 12, pp.1162-1171, 1999
  11. 설수덕, 이선룡, 이내우, '$CaCO_3$/Poly ethylmethacrylate를 이용한 무독성 혼합 라텍스의 개발', 산업안전학회지, 제17권, 제14호, pp. 133-139, 2002