The Burst Pressure Analysis of Steam Generator Tubes with Inclined Type of Wear Damage

경사형 마멸 손상부를 가진 증기발생기 전열관의 파열압력 해석

  • Shin, Kyu-In (Nuclear Safety Research Department, Korea Insitute of Nuclear Safety) ;
  • Park, Jai-Hak (Department of Safety Engineering, Chungbuk National University) ;
  • Chung, Myung-Jo (Nuclear Safety Research Department, Korea Insitute of Nuclear Safety) ;
  • Choi, Young-Hwan (Nuclear Safety Research Department, Korea Insitute of Nuclear Safety)
  • 신규인 (한국원자력안전기술원 원자력안전연구실) ;
  • 박재학 (충북대학교 공과대학 안전공학과) ;
  • 정명조 (한국원자력안전기술원 원자력안전연구실) ;
  • 최영환 (한국원자력안전기술원 원자력안전연구실)
  • Published : 2004.06.01

Abstract

The fretting-fatigue by leaking is one of the significant degradation in steam generator tubes. In this study, the burst pressure of inclined damaged steam generator tubes were obtained from three criterions by using the finite element method. The analysis results were also compared with the experiment data from published references and they showed a good agreement with the experiment data.

Keywords

References

  1. 정한섭, 김기태, 김흥덕, '증기발생기 전열관 건전성 평가기준 개발', 전력연구원 보고서 (TR.96NJ14), 2000
  2. 한국중공업 보고서, '한국표준원전 증기발생기 전열관 마모 장,단기 시책 프로그램', 2000
  3. K. M. Sweeney, J. A. Begley, B. W. Woodman, R. E. Johnson, D. P. Siska and J. 'Thakkar, 'Palo Verde Nuclear Generating Station Unit 2 Operational Assessment; Batwing Support Induced Wear Degradation of Steam Generator Tubing during Cycle 7', 97-SGPG- 001 Report, 1997
  4. F. M. Guerout and N. J. Fisher, 'Steam Generator Fretting Wear Damage: A Summary of Recent Findings', ASME J. of Pressure Vessel Technology, Vol. 121, pp. 304-310, 1999 https://doi.org/10.1115/1.2883707
  5. J. M. Alzheimer, R. A.Clark, C. J. Morris and M. Vagins, 'Steam Generator Tube Integrity Program Phase I Report', NUREG CR-0718 report, 1979
  6. N. J. Fisher, A. B. Chow and M. K. Weckwerth, 'Experimental Fretting Wear Studies of Steam Generator Materials', ASME J. of Pressure Vessel Technology, Vol. 117, pp. 312-320, 1995 https://doi.org/10.1115/1.2842129
  7. 이영호 김인섭, 강성식, 송명호, '증기발생기 전열관 재료의 마모계수 평가', 제7회 원전기기 건전성 Workshop, 한국원자력안전기술원, 2000
  8. 신규인, 박재학, '마멸에 의해 손상된 증기발생기 전열관의 파열압력 해석', 산업안전학회지, 제18권, 제5호, pp. 1-7, 2003
  9. EPRI NP-6865-L, 'Steam generator tube integrity, Volume 1: Bust test results and validation of rupture criteria', 1991