DOI QR코드

DOI QR Code

Oxidation Rates of TiAlLaN Thin Films Deposited by Ion Plating

이온플레이팅법으로 제조된 TiAlLaN계 박막의 산화속도

  • 서성만 (공주대학교 신소재공학부) ;
  • 이기선 (공주대학교 신소재공학부) ;
  • 이기안 (포항산업과학연구원 부품신소재연구센터 신금속연구팀)
  • Published : 2004.03.01

Abstract

TiAl(La)N thin films were oxidized in vacuum of about 7 Pa to reduce the oxidation of WC-Co as a substrate. The oxidation rate constants of the thin films were quantified by an assumption of parabolic oxidation. Increasing AI content significantly decreased the parabolic oxidation rate constant. A simultaneous addition of AI and La was more effective to reduce the oxidation rate. The parabolic oxidation rate constant of $Ti_{0.66}$ $Al_{0.32}$ $La_{ 0.02}$N thin film at 1273 K showed about ten times lower than that of TiN. The addition of a small amount of La with Al induced the preferential formation of dense $\alpha$ $-Al_2$$O_3$ film in oxide film, leading to the abrupt reduction of oxidation rate.

Keywords

References

  1. J.-E. Sundgren, Thin solid films, 128, 21 (1985) https://doi.org/10.1016/0040-6090(85)90333-5
  2. Milosev, H.-H. Sterehblow, B. Navinsek and M. Metikos-Hukovic, Surf. and Interface Analysis, 23, 529 (1995) https://doi.org/10.1002/sia.740230713
  3. W.-D. Munz, J. Vac. Sci. Tech., A 4(6), 2721 (1986)
  4. O. Knotek, W. Bosch and T. Leyendecker, 11th Int. Plansee Seminar, 1, 667 (1985)
  5. E. J. Bienk, H. Reitz and N. J. Mikkelsen, Surf. Coat. Tech., 76/77, 475 (1995) https://doi.org/10.1016/0257-8972(95)02498-0
  6. D.-Y. Wang, Y.-W. Li and W.-Y. Ho, Surf, Coat. Tech., 114(2), 109 (1999) https://doi.org/10.1016/S0257-8972(99)00020-1
  7. K.-H. Habig and G. Meier zu Kocker, Surf. Coat. Tech., 62, 428 (1993) https://doi.org/10.1016/0257-8972(93)90279-W
  8. W. Konig, R. Fritsch and D. Kammermeier, Surf. Coat. Tech., 49, 316 (1991) https://doi.org/10.1016/0257-8972(91)90076-9
  9. D. Hofmann, B. Hensel, M. Yasuoka and N. Kato, Surf. Coat. Tech., 61, 326 (1993) https://doi.org/10.1016/0257-8972(93)90247-L
  10. T. Leyendecker, O. Lemmer, S. Esser and J. Ebberink, Surf. Coat. Tech., 48, 175 (1991) https://doi.org/10.1016/0257-8972(91)90142-J
  11. K.-S. Lee, Y.-C. Shin, K.-H. Oh, W.-W. Park and H.-Y Ra, J. Kor. Inst. Met. & Mater., 34(7), 943 (1996)
  12. I. Penttinen, J. M. Molarius and R. Lappalainen, J. Vac. Sci. Tech., A 6(3), 2158 (1988) https://doi.org/10.1116/1.575207
  13. Miltan C. Shaw, Metal Cutting Principles, pp. 255, Oxford Univ. Press, (1997)