Applied-mineralogical Study on the Mineral Facies and Characteristics of Domestic High-Ca Limestone

국내산 고품위 석회석의 광물상 및 광물특성에 관한 응용광물학적 연구

  • 노진환 (강원대학교 지질학과) ;
  • 오성진 (강원대학교 지질학과) ;
  • 김경진 (대한광업진흥공사 자원탐사처)
  • Published : 2004.12.01

Abstract

Locality of domestic high-Ca limestones can be divided into three districts, i.e., (1) the Jecheon-Danyang area, (2) the Samcheok-Taebaek-Jungsun area, and (3) the Uljin-Andong area, in accordance with their geologic background and type of the deposits. Except for some crystalline limestones from the Jecheon-Danyang area, domestic high-Ca limestones were mostly recrystallized and Ca-enriched by the effects of hydrothermal alteration and/or thermal metamorphism. The lime-stones can be also divided into crystalline limestone type, marble type, micro- and mega-crystalline calcite types on the basis of their composition, crystallinity, and mineral facies. An applied-mineralogical characterization of the high-Ca limestones was done through the systematic analyses and tests for the limestones. The high-Ca limestones from the area (1), which are megascopic ally close to the original limestone in lithology, display lower whiteness, higher contents of CaO (51 ~ 54 wt.%), low crystallinity, and fine-grained texture. Two typical hydrothermal types of the high-Ca limestones from the area (2), i.e., micro- (mostly 0.2~0.3 mm) and mega-crystalline (2~15 em) calcite types, have comparatively higher whiteness and rather variable CaO contents (50~55 wt.%) with exhibiting quite different crystallinity each other. The micro-crystalline calcite type is especially dominant in this area, and has comparatively uniform crystallinity and homogeneous composition. Compared to these limestones, the high-Ca limestones from the area (3) show remarkable differences in grade and quality according to their types of deposit and occurrence. Based on these mineral characters and chemical composition, a possible scheme for industrial uses of the domestic high-Ca limestones was suggested.

국내산 고품위 석회석은 그 지질 배경과 광상 유형에 따라 (1) 제천-단양 지구, (2) 삼척-태백-정선 지구 및 (3) 울진-안동 지구의 유형들로 구분된다. 제천-단양 지구에서 산출되는 석회석을 제외한 대부분의 국내산 고품위 석회석들은 석회암이 열수변질작용과 열변성작용을 받아 재결정되고 Ca이 부화된 양상을 이룬다. 국내산 고품위 석회석은 광물조성, 화학조성, 결정도 및 광물상의 차이에 따라 결정질 석회암형, 대리암형, 미정질 및 거정질 방해석 유형으로 구분된다. 이들에 대해 응용광물학적 관점에서 그 조성과 특성을 밝히기 위한 체계적인 시험 및 분석이 이루어졌다. 제천-단양 지구의 고품위 석회석들은 외견상 원암에 가까운 결정질 석회암 유형으로서, 낮은 결정도와 세립질 조직, 비교적 높은 CaO 함량(51~54 wt.%) 및 낮은 백색도의 광석 특성을 갖는다. 삼척-태백-정선 지구에서 산출되는 미정질(대개 0.2~0.3 mm) 및 거정질(2~15 cm) 고품위 석회석은 전형적인 열수변질형 광석으로서, 결정도에서 유형별로 서로 현격한 차이를 보이고 다소 편차가 심한 CaO 함유도(50~55 wt.%) 및 높은 백색도를 보이는 것이 특징이다. 특히 이 지역의 주된 광체인 미정질 방해석형 광석은 미세하고 균일한 결정도와 보다 균질한 조성(대개 > 52 wt.%)을 이룬다. 울진-안동 지구의 변성퇴적암류에서 산출되는 석회석들은 그 광상 유형과 산출상태에 따라 품위와 품질면에서 현격한 차이를 보인다. 이 같은 국내산 고품위 석회석의 광물특성과 화학조성상의 특징에 의거하여 지역별로의 광석 유형에 따라 적절한_개발 용도를 제시하였다.

Keywords

References

  1. 노진환, 오성진, 이나경 (2004) 풍촌층 석회암의 열수변질과 고품위 석회석의 생성, 2004 대한지질학회 추계학술발표회 초록집, 81.
  2. 대한광업진흥공사 (2002) 정밀조사보고서 (석회석: 영월-토교 및 제천 두학 지구). 대한광업진흥공사 자원탐사처, 82p.
  3. 장병두, 손길상 (2002) 국내 고품위 석회석의 부존특성 및 개발현황, 석회석과 그 응용, 제3회 산업광물심포지움 논문집, 15-31.
  4. 노진환, 최진범 (2002) 석회석의 품위 및 품질 개념과 그 평가방안, 광물과산업, 15, 1-14.
  5. Chang, L.L.Y. (2002) Industrial Mineralogy: Materials, Processes, and Uses. Prentice Hall, 472p.
  6. Harben, P.W. (1999) The Industrial Minerals HandyBook. Industrial Minerals Information LTD., 296p.
  7. Harben, P.W. and Knzvart, M. (1999) Indnstrial Minerals: A Global Geology. Industrial Minerals Information LTD., 462p.
  8. Harrison, D.J. (1992) Limestone, British Geological Survey, 38-40p.
  9. Taylor, J.C. (1991) Computer programs for standardless quantitative analysis of minerals using the full powder diffraction profile. Powder Diffraction, 6, 2-9.
  10. Taylor, J.C. and Hinezak, I. (2001) Rietveld made easy: A practical guide to the understanding of the method and successful phase quantification, 201 p.