Journal of the Korean Operations Research and Management Science Society (한국경영과학회지)

The Korean Operations Research and Management Science Society (한국경영과학회)
권호 표지

Comparison of Production and Distribution Policy in the Supply Chain Model Considering Characteristics of the Semiconductor Industry

반도체 산업의 특성을 고려한 공급사슬 모형에 대한 생산 및 분배정책의 비교

  • 정성욱 (연세대학교 컴퓨터과학ㆍ산업시스템공학과) ;
  • 이병진 (연세대학교 컴퓨터과학ㆍ산업시스템공학과) ;
  • 이영훈 (연세대학교 컴퓨터과학ㆍ산업시스템공학과)
  • Published : 2004.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Semiconductor industry is the one whose supply chain network is distributed all over the world. And it has different characteristics with other manufacturing industries as reentrancy, binning, substitution. In this paper, we suggest supply chain models for the semiconductor industry, consisting of production and distribution chains, where manufacturing characteristics are considered. Three policies for the production chain and two policies for the distribution chain are suggested and formulated mathematically. Six combination policies are tested for the evaluation of performances with example. It is shown that the supply chain is operated, if production and distribution are coordinated and managed based on the demand information, without inventory, as efficiently as the chain with inventory.

Keywords

References

  1. Ahmadi, J., R, Benson and D. Supernaw-Issen, 'Supply chain production planning,' Operational Research in Industry, Edited by T.A. Ciriani, S. Gliozzi, E.L. Johnson, and R Tadei, Macmillan Press(1999), pp.199-232
  2. Bouff, J,L., 'Semiconductor manufacturing : A supply chain management perspective,' Conference on Global Supply Chain Management, Singapore, 1997
  3. Christie, R.M. and D. WU, 'Semiconductor capacity planning : stochastic modeling and computational studies,' IIE Transactions, 34(2002), pp.131-143
  4. Glassey, C.R. and M.G.C. Resende, 'Closedloop job release control for VSLI circuit manufacturing,' IEEE Transactions on Semiconductor Manuacturing, Vol.1, No.1(1988a), pp.36-46 https://doi.org/10.1109/66.4371
  5. Glassey, C.R and M.G.C. Resende, 'A scheduling rule for job release in semiconductor fabrication,' Operations Research Letters, 7(1988b), pp.213-217
  6. Jain, S., B. Gan, C. Lim and Y Low, 'Criticality of detailed modeling in semiconductor supply chain simulation,' Proceedings of the 1999 Winter Simulation Conference(1999), pp.888-896
  7. Jain, s., B. Gan, C. Lim and Y Low, 'Bottleneck based modeling of semiconductor supply chains,' Proceedings of the MASM Conference(2000), pp.340-345
  8. Kim, S., S. Yea and B. Kim, 'Stepper scheduling in semiconductor wafer fabrication process,' Proceedings of the International Conference on Modeling and Analysis of Semiconductor Manufacturing(2000), pp.157-162
  9. Lee, Y.H., 'Supply chain model for the semiconductor industry of global market,' Journal of Systems Integration, 10(2001), pp, 189-206
  10. Lee, YR., S.U. Chung and B.J, Lee, 'Supply Chain Model for the Semiconductor Industry considering manufacturing characteristics,' Production Planning and Control, submitted, 2003
  11. Lee, Y.H. and B.J, Lee, 'Push pull production planning of the reentrant process,' International Journal of Advanced Manufacturing Technology, 22(2003), pp.922-931
  12. Lee, Y.H. and T.H. kim, 'Manufacturing cycle time reduction using balance control in the semiconductor fabrication line,' Production Planning and Control, Vol.13, No.6(2002), pp.529-540 https://doi.org/10.1080/0953728021000014954
  13. Lee, Y.H., J.K. Park and S.Y. Kim, 'Experimental study on input and bottleneck scheduling for a semiconductor fabrication line,' IIE Transactions, 34(2002), pp.179-190
  14. Liu, C., 'A modular production planning system for semiconductor manufacturing,' Ph.D. Dissertation, University of California, Berkeley, 1992
  15. Lou, S.X.C and P.W. Kager, 'A robust production control policy for VLSI wafer fabrication,' IEEE Transactions on Semiconductor Manufacturing, Vol.2, No.4(1989), pp.159-164 https://doi.org/10.1109/66.44620
  16. Morrison, J., M. Janakiram and P.R Kumar, 'A comparative study of scheduling policies at Motorola fabs,' The Proceedings of International Conference on Semiconductor Manufacturing Operational Modeling and Simulation, San Francisco(1999), pp.51-56
  17. Murty, S.V. and J,W. Bienvenu, 'Global planning at Harris Semiconductor,' IEEE International Symposium on Semiconductor Manufacturing, 1995
  18. Ovacik, I.M. and W. Weng, 'A framework for supply chain management in semiconductor manufacturing industry,' IEEE/CPMT International Electronics Manufacturing Technology Symposium, 1995
  19. Pierce, N.G. and T. Yurtsever, 'Valuebased dispatching for semiconductor wafer fabrication,' The Proceedings of International Conference on modeling and Analysis of Semiconductor Manufacturing(2000), Arizona, pp.172-176
  20. Spearman, M.L., D.L. Woodruff and W.J. Hopp, 'CONWIP: a pull alternative to kanban,' International Journal of Production Research, Vol.28, NO.5(1990), pp.879-894
  21. Wein, L.M., 'Scheduling semiconductor wafer fabrication,' IEEE Transactions on Semiconductor Manufacturing, Vol.1, No.3(1988), pp.115-129 https://doi.org/10.1109/66.4384