References
- Doege, E., Groche, P. and Bobke, T., 'Application of adhesion theory to friction and wear processes in hot die forging,' Advanced Technology of Plasticity, Vol. 1, pp. 27-32, 1990
- Rooks, B. W., 'Effect of die temperature on metal flow and die wear during high speed hot forging,' Proc. 15th Inter. MTDR Conference
- Liou, M. J. and Hsiao, H. S., 'Prediction of die wear in high speed hot upset forging,' ERC/NSM Report, No. 99-33, Ohio State University, 1989
- Nojima, H. and Saga, J., 'Effects of punch geometry on punch pressure in cold backward extrusion,' JSTP, Vol. 21, No. 234, pp. 635-641, 1980
- Mizuno, T., Kojima, Y., Zhu, W. and Kitamura, K., 'Analysis of surface expansion in cold backward extrusion of cup-deformation and lubrication in cold cup extrusion II,' JSTP, Vol. 26, No. 298, pp. 1096-1101, 1985
- Mizuno, T., Zhu, W., Kojima, Y. and Sugimoto, K., 'Effects of punch profile on deformation behaviour in backward extrusion of mild steel cup-deformation and Lubrication in cold extrusion III,' JSTP, Vol. 28, No. 321, pp. 1060-1066, 1987
- Bay, N., Lassen, S. and Pedersen, K. B., 'Lubrication limits in backward can extrusion at low reduction,' Annals of the CIRP, Vol. 40, No. 1, pp. 239-242, 1991 https://doi.org/10.1016/S0007-8506(07)61977-5
- Achard, J. F., 'Contacts and rubbing of flat surfaces,' J. of Appl. Phys., Vol. 24, pp. 981, 1953 https://doi.org/10.1063/1.1721448
- Kim, D. H., Kim, B.M., Lee, Y., Yoo, S. J. and Joo, W. Y., 'Adjustment of roll gap for the dimension accuracy of bar in hot bar rolling process,' J. of KSPE., Vol. 1, No. 1, pp. 1036-1041, 2001
- Ko, D. C., Kim, D. H. and Kim, B. M., 'Finite element analysis for the wear of Ti-N coated punch in the piercing process,' Wear, Vol. 252, pp. 859-869, 2002 https://doi.org/10.1016/S0043-1648(02)00032-7
- General Recommendations for Design, Manufacture and Operational Aspects of Cold Extrusion Tools for Steel Components, ICFG Doc. No. 6/82, Int. Cold Forging Group, Porcullis Press, 1983
- DEFORM User's Manual V4.1, 1995
- Bennani, B. and Bay, N., 'Limits of lubrication in backward can extrusion: analysis by the finite-element method and physical modelling experiments,' J. of Mat. Proc. Tech., Vol. 61, pp. 275-286, 1996 https://doi.org/10.1016/0924-0136(95)02181-7
- Kuziman, K., Pfeifer, E., Bay, N. and Hunding, J., 'Control of material flow in a combined backward can-forward rod extrusion,' J. of Mat. Proc. Tech., Vol. 60, pp. 141-147, 1996 https://doi.org/10.1016/0924-0136(96)02319-9
- Bennani, B. and Oudin, J., 'Backward can extrusion of steels: effects of punch design on flow mode and void volume fraction,' Int. J. of Math. Tools Manufact., Vol. 35, No. 6, pp. 903-911, 1995 https://doi.org/10.1016/0890-6955(94)E0035-H