Abstract
This paper describes the speed control of the surface-mounted permanent-magent synchronous motors (SMPMSNM) for elevator drive. The elevator motor needs to be a compact and slim type. Essentially, the proposed scheme uses a vector control algorithm for a speed and torque control and Anti-windup technique is adopted to prevent a windup phenomenon. This system is implemented using a high speed 32-bit DSP (TMS320C31-50), a high-integrated logic device FPGA(EPF10K10TI144-3) to design compactly and inexpensively. The proposed scheme is verified by the results through digital simulation and experiments for a three-phase 13.3[kW] SMPMSM as a MRL(MachineRoomLess) elevator motor in the laboratory.
본 논문은 엘리베이터용 표면부착형 영구자석형 동기전동기의 속도제어를 기술하였다. 엘리베이터 전동기는 컴팩트하고 슬립형이 되어야 한다. 제안된 기법은 속도 및 토크제어를 위해 벡터제어 알고리즘을 사용하였으며, 속도제어기와 전류제어기에 windup 현상을 방지하기 위해 Anti-windup 기법을 적용하였다. 이 시스템은 컴팩트하고 저렴하게 설계하기 위하여 고속 32비트 DSP(TMS320C31-50), 고직접 논리소자 FPGA(EPF10K10TI144-3)로 수행되었다. 제안된 기법은 기계실 없는 엘리베이터용 3상 13.3[kW] 표면부착형 동기전동기로 시뮬레이션 및 실험을 통하여 결과를 확인하였다.