Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Optimal Design of the Optical Pickup Actuator Coil

광픽업 구동기 코일최적설계

  • Published : 2004.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

The objective of this work is to develop a new design method to find optimal coils, especially the optimal coil configuration of an optical pickup actuator. In designing actuator coils, the developed Lorenz force in the coils along the desired direction should be made as large as possible while forces and torques in other directions should be made as small as possible. The design methodology we are developing is a systematic approach that can generate optimal coil configurations for given permanent magnet configurations. To consider the best coil configuration among all feasible coil configurations, we formulate the design problem as a topology optimization of a coil. The present formulation for coil design is noble in the sense that the existing topology optimization is mainly concerned with the design of yokes and permanent magnets and that the optimization of actuator coils is so far limited within shape or size optimization. Though the present design methodology applies to any problem, the specific design example considered is the design of fine-pattern tracking and focusing coils.

이 논문에서는 최적 코일형상 설계 방법을 제시하였다. 구동기 코일 설계 시, 코일에 발생하는 로렌츠 힘은 원하는 방향으로 가능한 크게 하고, 반면에 원하지 않는 방향으로의 힘과 토크를 가능한 작게 해야 한다. 기존의 위상최적화는 주로 요크와 자석의 위상최적화와 구동기에서의 코일형상, 치수 최적화에 국한한데 비하여 본 연구에서는 모든 가능한 코일형상 중에 최적의 코일 형상을 찾기 위해 코일 위상최적화문제를 새롭게 정식화하였다. 제안한 설계 방법은 여러 문제에 적용할 수 있지만, 본 연구에서는 파인-패턴 트랙킹과 포커스 코일의 설계에 관한 내용을 고려하였다.

Keywords

References

  1. Journal of Korean Society of Noise and Vibration Engineering v.8 no.3 Actuating Characteristics of an Asymmetric Optical Pick-up Fine Actuator of a High Speed CD-ROM Go, S.(et al.)
  2. IEEE Trans. Mag. v.35 no.5 Flux Leakage Effect on Subsidiary Resonance of Optical Disk Drive Park, K.(et al.) https://doi.org/10.1109/20.800628
  3. Korean Society of Noise and Vibration Engineering conference Improvement of Dynamic Characteristics through Optimization of Tracking Coils Jung, Gi.-W.(et al.)
  4. KSNVE (Transaction of Korean Society of Noise and Vibration Engineering) v.8 no.4 Design and vibration Reduction Method of Sub-resonance in Optical Pick -up Actuator Using the Fine Pattern Coil Jeong. H.-S.(et al.)
  5. J. Magnetic and Magnetic Materials v.238 A Magnetic Design for Slim Type DVD Actuator Ke, C.-Y.(et al.)
  6. Int. J. Solids Structures v.37 Multi-resolution Multi-scale Topology Optimization - A New Paradigm Y. Y. Kim(et al.) https://doi.org/10.1016/S0020-7683(99)00251-6
  7. KSME Int. J. v.15 The Role of S-shaped Mapping Functions in the SIMP Approach for Topology Optimization Yoon. G. H.(et al.)
  8. Int. J. Numer. Mech. v.24 The method of Moving Asymptotes - a New Method for Structural Optimization Svanberg, K. https://doi.org/10.1002/nme.1620240207
  9. Design Sensitivity Analysis of Structural Systems Haug. E. J.(et al.)
  10. IEEE Trans. Mag. v.38 no.2 Novel Technique for Current Density Distribution Analysis of Solidly Modeled Coil Im, C.-H.(et al.) https://doi.org/10.1109/20.996133
  11. Optimization of Coil Configuration Maximizing the Lorenz Fore by Topology Optimization; Applications to Optical Pickup Coil Design Kim, W.(et al.)