On Application of Optimization Scheme To Direct Numerical Analysis Of Slider

  • Hwang, Pyung (School of Mechanical Engineering, Yeungnam University) ;
  • Khan, Polina (Department of Mechanical Engineering, Yeungnam University) ;
  • Pan, Galina (Department of Mechanical Engineering, Yeungnam University)
  • 발행 : 2004.06.01

초록

The object of the present work is the numerical analysis of the computer hard disk slider. The pressure between slider and disk surfaces is calculated using the Boundary Fitted Coordinate System and Divergence Formulation for the nonlinear Reynolds' equation solution. The optimization scheme is applied to search for the steady state position of the slider. The simplified method is given for the case of the fixed inclined pad. The film thickness ratios and pitching and rolling angles are considered as alternative choice of the slider's coordinates. The behavior of the objective function for the Negative Pressure slider is studied in details. Methods of conjugate directions and feasible directions are applied.

키워드

참고문헌

  1. Jih-Ping Peng, Cal E. Hardie, 'Characteristics of the Air Bearing Suction Force in Magnetic Recording Disks,' ASME Journal of Tribology, Vol. 118, pp. 549-553, 1996 https://doi.org/10.1115/1.2831573
  2. J.W. White, 'Flying Characteristics of the Transverse and Negative Pressure Contour (TNP) Slider Air Bearing,' ASME Journal of Tribology, Vol. 119, pp. 241-248, 1997 https://doi.org/10.1115/1.2833166
  3. Q.H. Zeng, D.B. Bogy, 'Stiffness and Damping Evaluation of Air Bearing Slider and New Designs With High Damping,' ASME Journal of Tribology, Vol. 121, pp. 341-347, 1999 https://doi.org/10.1115/1.2833943
  4. S. Fukui, R. Kaneko, 'A Database for the Interpolation of Poiseuille Flow Rate for the High Knudsen Number Lubrication Problems,' ASME Journal of Tribology, Vol. 112, pp. 78-83, 1990 https://doi.org/10.1115/1.2920234
  5. M.T.C. Faria, L.S. Andres, 'On the Numerical Modeling of High-Speed Hydrodynamic Gas Bearings,' ASME Journal of Tribology, Vol. 122, pp. 124-130, 2000 https://doi.org/10.1115/1.555335
  6. N. Kawabata, 'A Study on the Numerical Analysis of Fluid Film Lubrication by the Boundary Fitted Coordinate System [Fundamental Equation of the DF method],' JSME Int. Journal, Vol. 31, No. I, pp. 107-113, 1988
  7. L. Wu, D.B. Bogy, 'Unstructured Adaptive Triangular Mesh Generation Techniques and Finite Volume Schemes for the Air Bearing Problem in the Hard Disk,' ASME Journal of Tribology, Vol. 122, pp. 761-770, 2000 https://doi.org/10.1115/1.1310371
  8. P. Hwang, S.S. Park, I. Chang, D. Han, 'Static Analysis of Gas Bearing with Ultra Low Clearance by the Direct Numerical Method,' Proc. of KSME, pp. 138-143, 1989
  9. P. Hwang, S.S. Park, and E. Kim, 'A Study on Lubricative Characteristics of the Negative Pressure Slider,' KSTLE International Journal, Vol. 3, No.2, pp. 110-113, 2002
  10. B.J. Hamrock, Fundamentals of fluid film lubrication, Chap. 8, pp. 172-186, McGraw-Hill, Columbus, 1994
  11. M.S. Bazaraa, and C.M. Shetty, Nonlinear Programming, Chap. 8, pp. 289-316, John Wiley&Sons, New York, 1979
  12. N. Kawabata, 'A Useful Numerical Analysis Method for the Dynamic Characteristics of Fluid Film Lubrication (The case of Incompressible Fluid Lubrication),' JSME Int. Journal, Vol. 34, No. I, pp. 91-96, 1991