KSTLE International Journal

한국트라이볼로지학회 (Korean Tribology Society)
권호 표지

Finite Element Analysis of the Inclined Subsurface Cracks in a Homogeneous Body Under a Moving Compressive Load

  • Lee, Kyung-Sick (School of Mechanical and Automotive Engineering, University) ;
  • Chung, Gyu-Sung (School of Mechanical and Automotive Engineering, University)
  • 발행 : 2004.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The inclined subsurface cracks in a homogeneous body subjected to a moving compressive load is analyzed with the finite element method (FEM) considering friction on the crack surface. The stress intensity factors for the inclined subsurface cracks are evaluated numerically for various cases such as different inclined angles and changes in the coefficient of friction. The effects of the inclined angle and the coefficient of friction on the stress intensity factor are discussed. The difference between the behaviors of the parallel subsurface crack and those of the inclined subsurface crack is also examined.

키워드

참고문헌

  1. N. P. Suh, 'The delamination theory of wear,' Wear, Vol. 20, pp. 111-124, 1973
  2. J. R. Flemming, N. P. Suh, 'Mechanics of crack propagation in delamination wear,' Wear, Vol. 44, pp. 39-56, 1977 https://doi.org/10.1016/0043-1648(77)90083-7
  3. A. R. Rosenfield, 'A fracture mechanics approach to wear,' Wear, Vol. 61, pp. 125-132, 1980 https://doi.org/10.1016/0043-1648(80)90117-9
  4. D. A. Hills, D. W. Ashelby, 'On the application of fracture mechanics to wear,' Wear, Vol. 54, pp. 321-330, 1979 https://doi.org/10.1016/0043-1648(79)90124-8
  5. L. M. Keer , M. D. Bryant and G. K. Haritos, 'Subsurface and Surface Cracking Due to Hertzian Contact,' ASME J. Lubr. Tech., Vol. 104, pp. 347-351, 1982 https://doi.org/10.1115/1.3253217
  6. L. M. Keer, M. D. Bryant, 'A pitting model for rolling contact fatigue,' J. Lubr. Tech., Vol. 105, pp. 198-205, 1983 https://doi.org/10.1115/1.3254565
  7. A. D .Hearle, K. L. Johnson, 'Mode II Stress Intensity Factors for a Crack Parallel to the Surface of an Elastic Half Space Subjected to a Moving Point Load,' J. Mechs. Phys. Solids, Vol. 33, pp. 61-81, 1985 https://doi.org/10.1016/0022-5096(85)90022-5
  8. S. Sheppard, J. R. Barber and M. Comninou, 'Short Subsurface Cracks Under Conditions of Slip and Stick Caused by a Moving Compressive Load,' ASME J. Appl. Mech., Vol. 52, pp. 811-817, 1985 https://doi.org/10.1115/1.3169151
  9. S. Sheppard, J. R. Barber and M. Comninou, 'Subsurface Cracks Under Conditions of Slip, Stick, Separation Caused by a Moving Compressive Load,' ASME J. Appl. Mech., Vol. 54, pp. 393-398, 1987 https://doi.org/10.1115/1.3173025
  10. K. S. Lee, J. T. Tinn and Y. Y. Earmme, 'Finite element analysis of a subsurface crack on the interface of a coated material under a moving compressive load,' Wear, Vol. 155, pp. 117-136, 1992
  11. R. S. Barsoum, 'On the use of isoparametric finite elements in linear fracture mechanics,' Int. J. Numer. Methods Eng., Vol. 10, pp. 25-37, 1976 https://doi.org/10.1002/nme.1620100103
  12. P. P. Lynn, A. R. Ingraffea, 'Transition elements to be used with quarter-point crack-tip elements,' lnt. J. Numer. Methods Eng., Vol. 12, pp. 1031-1036, 1978 https://doi.org/10.1002/nme.1620120612
  13. L. W. Malvern, Introduction to the Mechanics of a Continous Medium, Chap. 8, p. 539, Prentice hall, Eaglewood Cliffs, 1969